component
ADG619BRTZ-REEL7
Public Made by Adomby adom
Analog Devices Analog Switches, Multiplexers, SOT-23-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownADG619BRTZ-REEL7
Analog Devices · Analog Switches, Multiplexers · SOT-23-8
ADG619BRTZ-REEL7 from Analog Devices, in a SOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | D | passive | Drain terminal; can be an input or output. |
| 2 | S1 | passive | Source terminal; can be an input or output. |
| 3 | GND | power_in | Ground (0 V) reference. |
| 4 | VDD | power_in | Most positive power supply; single-supply range 2.7 V to 5.5 V and dual-supply range ±2.7 V to ±5.5 V. |
| 5 | NC | unconnected | No connect; not internally connected. |
| 6 | IN | input | Logic control input; TTL-/CMOS-compatible with VINH minimum 2.4 V and VINL maximum 0.8 V. |
| 7 | VSS | power_in | Most negative power supply; used only in dual-supply applications and should be tied to ground in single-supply applications. |
| 8 | S2 | passive | Source terminal; can be an input or output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-23-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| On Resistance (RON), dual supply | RON | 4 | 8.5 | Ω | VS = ±4.5 V, IDS = −10 mA; see Figure 15 | 3 | |
| RON Match Between Channels, dual supply | ΔRON | 0.7 | 1.35 | Ω | VS = ±4.5 V, IDS = −10 mA | 3 | |
| On-Resistance Flatness, dual supply | RFLAT(ON) | 0.7 | 1.4 | Ω | VS = ±3.3 V, IDS = −10 mA | 3 | |
| Source Off Leakage, dual supply | IS(Off) | -1 | 0.01 | 1 | nA | VS = ±4.5 V, VD = ∓ 4.5 V; see Figure 16 | 3 |
| Channel On Leakage, dual supply | ID, IS(On) | -1 | 0.01 | 1 | nA | VS = VD = ±4.5 V; see Figure 17 | 3 |
| Input High Voltage | VINH | 2.4 | V | 3 | |||
| Input Low Voltage | VINL | 0.8 | V | 3 | |||
| Input Current | IINL or IINH | -0.1 | 0.005 | 0.1 | μA | VIN = VINL or VINH | 3 |
| tON (ADG619), dual supply | tON | 80 | 155 | ns | VS = 3.3 V; see Figure 18 | 3 | |
| tOFF (ADG619), dual supply | tOFF | 45 | 90 | ns | VS = 3.3 V; see Figure 18 | 3 | |
| Break-Before-Make Time Delay, dual supply | tBBM | 10 | 40 | ns | VS1 = VS2 = 3.3 V; see Figure 19 | 3 | |
| Positive Supply Current, dual supply | IDD | 0.001 | 1 | μA | Digital inputs = 0 V or 5.5 V | 4 | |
| Negative Supply Current, dual supply | ISS | 0.001 | 1 | μA | Digital inputs = 0 V or 5.5 V | 4 | |
| On Resistance (RON), single supply | RON | 7 | 12.5 | Ω | VS = 0 V to 4.5 V, IDS = −10 mA; see Figure 15 | 5 | |
| RON Match Between Channels, single supply | ΔRON | 0.8 | 1.3 | Ω | VS = 0 V to 4.5 V, IDS = −10mA | 5 | |
| On-Resistance Flatness, single supply | RFLAT(ON) | 0.5 | 1.2 | Ω | VS = 1.5 V to 3.3 V, IDS = −10 mA | 5 | |
| Source Off Leakage, single supply | IS(Off) | -1 | 0.01 | 1 | nA | VS = 1 V/4.5 V, VD = 4.5 V/1 V; see Figure 16 | 5 |
| Channel On Leakage, single supply | ID, IS(On) | -1 | 0.01 | 1 | nA | VS = VD = 1 V/4.5 V; see Figure 17 | 5 |
| tON (ADG619), single supply | tON | 120 | 280 | ns | VS = 3.3 V; see Figure 18 | 5 | |
| tOFF (ADG619), single supply | tOFF | 50 | 110 | ns | VS = 3.3 V; see Figure 18 | 5 | |
| Break-Before-Make Time Delay, single supply | tBBM | 10 | 70 | ns | VS1 = VS2 = 3.3 V; see Figure 19 | 5 | |
| Positive Supply Current, single supply | IDD | 0.001 | 1 | μA | Digital inputs = 0 V or 5.5 V | 5 | |
| Supply Voltage, single supply (VDD) | VDD | 2.7 | 5.5 | V | single supply (Features) | 1 | |
| Supply Voltage, dual supply magnitude | VDD, /VSS/ | 2.7 | 5.5 | V | dual supply, ±2.7 V to ±5.5 V (Features) | 1 | |
| VDD to VSS | VDD−VSS | 13 | V | 6 | |||
| VDD to GND | VDD−GND | -0.3 | 6.5 | V | 6 | ||
| VSS to GND | VSS−GND | -6.5 | 0.3 | V | 6 | ||
| Peak Current, S or D | 100 | mA | pulsed at 1 ms, 10% duty cycle maximum | 6 | |||
| Continuous Current, S or D | 50 | mA | 6 | ||||
| Operating Temperature Range (B Version) | -40 | 85 | °C | 6 | |||
| Storage Temperature Range | -65 | 150 | °C | 6 | |||
| Junction Temperature | 150 | °C | 6 | ||||
| Lead Temperature, Soldering | 300 | °C | 10 sec | 6 | |||
| IR Reflow, Peak Temperature | 220 | °C | 6 | ||||
| θJA Thermal Impedance, SOT-23 | θJA | 229.6 | °C/W | SOT-23 package | 6 | ||
| θJC Thermal Impedance, SOT-23 | θJC | 91.99 | °C/W | SOT-23 package | 6 |
CAD (KiCad official)
- Symbol:
ADG619BRTZ-REEL7 - Footprint:
Package_TO_SOT_SMD:SOT-23-8 - 3D model: SOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
adg619brtz-reel7-etched.step/adg619brtz-reel7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adg619brtz-reel7.step/adg619brtz-reel7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
a0623a4e08342a6e, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).