component
ADG1436YRUZ-REEL7
Public Made by Adomby adom
Analog Devices Analog Switches, Multiplexers, TSSOP-16. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownADG1436YRUZ-REEL7
Analog Devices · Analog Switches, Multiplexers · TSSOP-16
ADG1436YRUZ-REEL7 from Analog Devices, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN1 | input | Logic control input for switch 1. Selects whether S1A or S1B is connected to D1 (INx=1 selects SxA, INx=0 selects SxB). 3 V logic-compatible; VINH ≥ 2.0 V, VINL ≤ 0.8 V. |
| 2 | S1A | bidirectional | Analog source terminal A of switch 1. Can be an input or output; connects to D1 when IN1 is high. Rail-to-rail signal range up to VDD/VSS supplies; typical RON ≈ 1.5 Ω. |
| 3 | D1 | bidirectional | Analog drain (common) terminal of switch 1. Can be an input or output; connects to either S1A or S1B based on IN1. |
| 4 | S1B | bidirectional | Analog source terminal B of switch 1. Can be an input or output; connects to D1 when IN1 is low. |
| 5 | VSS | power_in | Most negative power supply potential. Supports −15 V (dual), −5 V (dual), or 0 V (single supply). Sets the lower rail of the analog signal range. |
| 6 | GND | power_in | Ground (0 V) reference for the device. |
| 7 | NC | unconnected | No Connect. Leave floating or tie as needed; not internally bonded. |
| 8 | NC | unconnected | No Connect. Leave floating or tie as needed; not internally bonded. |
| 9 | IN2 | input | Logic control input for switch 2. Selects whether S2A or S2B is connected to D2 (INx=1 selects SxA, INx=0 selects SxB). 3 V logic-compatible. |
| 10 | S2A | bidirectional | Analog source terminal A of switch 2. Can be an input or output; connects to D2 when IN2 is high. |
| 11 | D2 | bidirectional | Analog drain (common) terminal of switch 2. Can be an input or output; connects to either S2A or S2B based on IN2. |
| 12 | S2B | bidirectional | Analog source terminal B of switch 2. Can be an input or output; connects to D2 when IN2 is low. |
| 13 | VDD | power_in | Most positive power supply potential. Supports +15 V (dual), +12 V (single), or +5 V (dual). Sets the upper rail of the analog signal range. |
| 14 | NC | unconnected | No Connect. Leave floating or tie as needed; not internally bonded. |
| 15 | NC | unconnected | No Connect. Leave floating or tie as needed; not internally bonded. |
| 16 | NC | unconnected | No Connect. Leave floating or tie as needed; not internally bonded. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
Ordering variants
Same part, different packaging or reel option.
ADG1436YRUZ-REEL7ADG1436YRUZ-REEL7YCPZ-REELADG1436YRUZ-REEL7YCPZ-REEL7
CAD (KiCad official)
- Symbol:
ADG1436YRUZ-REEL7 - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
adg1436yruz-reel7-etched.step/adg1436yruz-reel7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adg1436yruz-reel7.step/adg1436yruz-reel7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
15f70dbe4038bc6a, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).