ADG1401BRMZ-REEL7

{
  "slug": "adg1401brmz-reel7",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Analog Switches, Multiplexers, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "adg1401brmz-reel7",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "adg1401brmz-reel7.kicad_sym",
    "adg1401brmz-reel7.kicad_mod",
    "adg1401brmz-reel7.glb",
    "adg1401brmz-reel7.step",
    "adg1401brmz-reel7.lbr",
    "docs/hero.png",
    "docs/adg1401brmz-reel7-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "adg1401brmz-reel7-hero.glb",
    "adg1401brmz-reel7-hero.overlay.json",
    "adg1401brmz-reel7-etched.glb"
  ],
  "component": {
    "mpn": "ADG1401BRMZ-REEL7",
    "manufacturer": "Analog Devices",
    "package": "MSOP-8",
    "pin_count": 8,
    "category": "Interface",
    "subcategory": "Analog Switches, Multiplexers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588901835368747008",
    "parts": {
      "symbol": "adg1401brmz-reel7.kicad_sym",
      "footprint": "adg1401brmz-reel7.kicad_mod",
      "model_3d": "adg1401brmz-reel7-hero.glb",
      "model_3d_plain": "adg1401brmz-reel7-etched.glb",
      "model_3d_step": "adg1401brmz-reel7-etched.step",
      "model_3d_step_plain": "adg1401brmz-reel7.step",
      "lbr": "adg1401brmz-reel7.lbr"
    },
    "distributor_links": {
      "lcsc": "C209446",
      "digikey": "505-ADG1401BRMZ-REEL7TR-ND"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T23:49:21Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-ADG1401BRMZ-REEL7TR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "S",
        "type": "bidirectional",
        "description": "Source terminal of the SPST switch; this pin can be an input or output, with analog signal range extending from VSS to VDD."
      },
      {
        "number": "2",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground (0 V) reference for the device."
      },
      {
        "number": "4",
        "name": "VDD",
        "type": "power_in",
        "description": "Most positive power supply potential; VDD to GND is limited to −0.3 V to +25 V and VDD to VSS to 35 V absolute maximum."
      },
      {
        "number": "5",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect."
      },
      {
        "number": "6",
        "name": "IN",
        "type": "input",
        "description": "Logic control input; logic levels are 3 V compatible with VINH minimum 2.0 V and VINL maximum 0.8 V."
      },
      {
        "number": "7",
        "name": "VSS",
        "type": "power_in",
        "description": "Most negative power supply potential; VSS to GND is limited to +0.3 V to −25 V absolute maximum."
      },
      {
        "number": "8",
        "name": "D",
        "type": "bidirectional",
        "description": "Drain terminal of the SPST switch; this pin can be an input or output, with analog signal range extending from VSS to VDD."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pinout taken from Table 7 (Pin Function Descriptions) on page 8 because the pin-configuration figure; The datasheet's EPAD (exposed pad tied to VSS) applies only to the LFCSP package; the MSOP variant l; Pin 1 and pin 8 types were set to bidirectional because the datasheet says the S and D terminals can"
        ],
        "pages_sent": 16,
        "cost_usd": 0.0751,
        "at": "2026-10-18T23:47:09"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588901835368747008",
        "pages": 16,
        "sha256": "64460d0a1674b61e",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "adg1401brmz-reel7.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "847c4c5023fe1603fbd36900a5dcc4bd3901ba473f71d42c9a469f0236eaadf3",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "adg1401brmz-reel7-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "35ff1cea1d7e0e0939fd2113ce5c902d3a4b0c85ebc115524c19e97f7e408169",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}