← Commit history

Publish 0.1.2

Ray ·e58e4e5259 · ·parent 75bc211
3 files changed +133−134
README.md+66−67
@@ -2,32 +2,32 @@  **Texas Instruments** · Pre-ordered Chips · SOIC-20-300mil -ADC0804LCWMX from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.+ADC0804LCWMX from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | CS | input | Chip select input; the converter is started when CS and WR are simultaneously low, and the data outputs are enabled when CS and RD are both low. |-| 2 | RD | input | Read input; with CS also low, it resets the INTR flip-flop and enables the Tri-state output latches to provide the 8-bit digital outputs. |-| 3 | WR | input | Write input; a high-to-low transition on WR resets the internal SAR latches and shift register, and a conversion starts once CS and WR have both returned high. |-| 4 | CLK IN | input | External clock input, or the node used with external RC elements when the internal clock generator is used. |-| 5 | INTR | output | Interrupt request output that makes a high-to-low transition to signal the end of a conversion. |-| 6 | VIN(+) | power_in | Differential analog input (positive); the analog input voltage must stay within GND - 0.05 V to VCC + 0.05 V. |-| 7 | VIN(-) | power_in | Differential analog input (negative); the analog input voltage must stay within GND - 0.05 V to VCC + 0.05 V. |-| 8 | A GND | power_in | Analog ground pin, to be used as a single-point analog ground separate from the logic ground points. |-| 9 | VREF/2 | power_in | Reference voltage input for adjusting the full-scale reading; any VREF/2 bypass capacitors should return to the analog ground point. |-| 10 | D GND | power_in | Digital ground pin; the power supply bypass capacitor and the self-clocking capacitor should return to digital ground. |-| 11 | DB7 | tri_state | Data bit 7 Tri-state digital output of the latched 8-bit conversion result. |-| 12 | DB6 | tri_state | Data bit 6 Tri-state digital output of the latched 8-bit conversion result. |-| 13 | DB5 | tri_state | Data bit 5 Tri-state digital output of the latched 8-bit conversion result. |-| 14 | DB4 | tri_state | Data bit 4 Tri-state digital output of the latched 8-bit conversion result. |-| 15 | DB3 | tri_state | Data bit 3 Tri-state digital output of the latched 8-bit conversion result. |-| 16 | DB2 | tri_state | Data bit 2 Tri-state digital output of the latched 8-bit conversion result. |-| 17 | DB1 | tri_state | Data bit 1 Tri-state digital output of the latched 8-bit conversion result. |-| 18 | DB0 (LSB) | tri_state | Data bit 0, the least significant bit, Tri-state digital output of the latched 8-bit conversion result. |-| 19 | CLK R | input | RC timing resistor input pin for the internal clock generator. |-| 20 | VCC (or VREF) | power_in | +5 V supply voltage (recommended 4.5 V to 5.5 V), also the upper reference input to the ladder. |+| 1 | CS | input | Active-low chip select; CS and WR must both be low to start a conversion, and the datasheet assumes CS brackets the WR strobe. |+| 2 | RD | input | Active-low read strobe that, with CS low, resets INTR and enables the tri-state output latches onto DB0 to DB7. |+| 3 | WR | input | Active-low write strobe; the conversion starts on the low-to-high transition of WR while CS is low, and the WR pulse width must be at least 100 ns. |+| 4 | CLK IN | input | Clock input to a Schmitt trigger for an external clock of 100 kHz to 1460 kHz (640 kHz for specified accuracy, 40% to 60% duty cycle), or used with an external RC for self-clocking. |+| 5 | INTR | output | Active-low interrupt request output that goes high-to-low at the end of a conversion and can be tied to WR for free-running operation. |+| 6 | VIN(+) | power_in | Positive differential analog input that must stay within GND - 0.05 V to VCC + 0.05 V, with input currents above 1 mA requiring an external diode. |+| 7 | VIN(-) | power_in | Negative differential analog input used for offset (tare) correction, with the same GND - 0.05 V to VCC + 0.05 V range, and the output code is 00 hex when VIN(-) is at or above VIN(+). |+| 8 | A GND | power_in | Analog ground pin that should be wired to a single point separate from the logic ground and tied to D GND as the datasheet specifies. |+| 9 | VREF/2 | power_in | Reference voltage input for full-scale adjustment with an internal gain of 2, so the full-scale span is twice the voltage on this pin, and it defaults to VCC/2 when unconnected. |+| 10 | D GND | power_in | Digital ground pin for the logic and output drivers, to which the supply bypass capacitor should return. |+| 11 | DB7 | tri_state | Tri-state data output bit 7 (MSB), valid only when CS and RD are both low, with a logic-0 output of 0.4 V max at 1.6 mA. |+| 12 | DB6 | tri_state | Tri-state data output bit 6, valid only when CS and RD are both low, with a logic-0 output of 0.4 V max at 1.6 mA. |+| 13 | DB5 | tri_state | Tri-state data output bit 5, valid only when CS and RD are both low, with a logic-0 output of 0.4 V max at 1.6 mA. |+| 14 | DB4 | tri_state | Tri-state data output bit 4, valid only when CS and RD are both low, with a logic-0 output of 0.4 V max at 1.6 mA. |+| 15 | DB3 | tri_state | Tri-state data output bit 3, valid only when CS and RD are both low, with a logic-0 output of 0.4 V max at 1.6 mA. |+| 16 | DB2 | tri_state | Tri-state data output bit 2, valid only when CS and RD are both low, with a logic-0 output of 0.4 V max at 1.6 mA. |+| 17 | DB1 | tri_state | Tri-state data output bit 1, valid only when CS and RD are both low, with a logic-0 output of 0.4 V max at 1.6 mA. |+| 18 | DB0 (LSB) | tri_state | Tri-state data output bit 0 (LSB), valid only when CS and RD are both low, with a logic-0 output of 0.4 V max at 1.6 mA. |+| 19 | CLK R | input | RC timing resistor input for the internal clock generator, where heavy capacitive or DC loading should be avoided (loads under 50 pF are allowed). |+| 20 | VCC (or VREF) | power_in | +5 V supply voltage, also the upper reference input to the ladder, with a recommended range of 4.5 V to 5.5 V and an absolute maximum of 6.5 V. |  ## Key specifications @@ -44,52 +44,51 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Supply voltage | VCC |  |  | 6.5 | V |  | 4 |+| Total Unadjusted Error (ADC0804) |  | -1 |  | 1 | LSB | VREF/2=2.500 VDC | 5 |+| Clock Frequency | fCLK | 100 | 640 | 1460 | kHz | VCC = 5V | 5 |+| Clock Duty Cycle |  | 40 |  | 60 | % |  | 5 |+| Conversion Time | TC | 103 |  | 114 | µs | fCLK = 640 kHz | 5 |+| Conversion Time | TC | 66 |  | 73 | 1/fCLK | See (2)(1) | 5 |+| Conversion Rate in Free-Running Mode | CR | 8770 |  | 9708 | conv/s | INTR tied to WR with CS = 0 VDC, fCLK = 640 kHz | 5 |+| Width of WR Input (Start Pulse Width) | tW(WR) | 100 |  |  | ns | CS = 0 VDC | 6 |+| Access Time (Delay from Falling Edge of RD to Output Data Valid) | tACC |  | 135 | 200 | ns | CL = 100 pF | 6 |+| Tri-State Control (Delay from Rising Edge of RD to Hi-Z State) | t1H, t0H |  | 125 | 200 | ns | CL = 10 pF, RL = 10k | 6 |+| Delay from Falling Edge of WR or RD to Reset of INTR | tWI, tRI |  | 300 | 450 | ns |  | 6 |+| Input Capacitance of Logic Control Inputs | CIN |  | 5 | 7.5 | pF |  | 6 |+| Tri-State Output Capacitance (Data Buffers) | COUT |  | 5 | 7.5 | pF |  | 6 |+| Logical 1 Input Voltage (Except Pin 4 CLK IN) | VIN(1) | 2 |  | 15 | V | VCC = 5.25 VDC | 6 |+| Logical 0 Input Voltage (Except Pin 4 CLK IN) | VIN(0) |  |  | 0.8 | V | VCC = 4.75 VDC | 6 |+| Logical 1 Input Current (All Inputs) | IIN(1) | 0.005 |  | 1 | µA | VIN = 5 VDC | 6 |+| Logical 0 Input Current (All Inputs) | IIN(0) | -1 |  | -0.005 | µA | VIN = 0 VDC | 6 |+| CLK IN (Pin 4) Positive Going Threshold Voltage | VT+ | 2.7 | 3.1 | 3.5 | V |  | 6 |+| CLK IN (Pin 4) Negative Going Threshold Voltage | VT− | 1.5 | 1.8 | 2.1 | V |  | 6 |+| CLK IN (Pin 4) Hysteresis (VT+)-(VT−) | VH | 0.6 | 1.3 | 2 | V |  | 6 |+| Logical 0 CLK R Output Voltage | VOUT |  |  | 0.4 | V | IO = 360 µA, VCC = 4.75 VDC | 6 |+| Logical 1 CLK R Output Voltage | VOUT | 2.4 |  |  | V | IO = -360 µA, VCC = 4.75 VDC | 6 |+| Data Outputs Logical 0 Output Voltage | VOUT(0) |  |  | 0.4 | V | IOUT = 1.6 mA, VCC = 4.75 VDC | 6 |+| INTR Output Logical 0 Output Voltage | VOUT(0) |  |  | 0.4 | V | IOUT = 1.0 mA, VCC = 4.75 VDC | 6 |+| Data Outputs Logical 1 Output Voltage | VOUT(1) | 2.4 |  |  | V | IO = -360 µA, VCC = 4.75 VDC | 6 |+| INTR Output Logical 1 Output Voltage | VOUT(1) | 4.5 |  |  | V | IO = -10 µA, VCC = 4.75 VDC | 6 |+| Tri-State Disabled Output Leakage (All Data Buffers) | IOUT | -3 |  |  | µA | VOUT = 0 VDC | 6 |+| Tri-State Disabled Output Leakage (All Data Buffers) | IOUT |  |  | 3 | µA | VOUT = 5 VDC | 6 |+| Output Source Current | ISOURCE | 4.5 | 6 |  | mA | VOUT Short to GND, TA = 25°C | 6 |+| Output Sink Current | ISINK | 9 | 16 |  | mA | VOUT Short to VCC, TA = 25°C | 6 |+| Supply Current (Includes Ladder Current) ADC0804LCN/LCWM | ICC |  | 1.9 | 2.5 | mA | fCLK = 640 kHz, VREF/2 = NC, TA = 25°C and CS = 5 V | 6 |+| Supply voltage (VCC) | VCC |  |  | 6.5 | V |  | 4 | | Logic control inputs voltage |  | -0.3 |  | 18 | V |  | 4 |-| Voltage at other inputs and outputs |  | -0.3 |  |  | V |  | 4 |-| Lead temperature, surface mount vapor phase |  |  |  | 215 | °C | Vapor phase (60 seconds) | 4 |-| Lead temperature, surface mount infrared |  |  |  | 220 | °C | Infrared (15 seconds) | 4 |-| Storage temperature |  | -65 |  | 150 | °C |  | 4 |-| Package dissipation |  |  |  | 875 | mW | TA = 25°C | 4 |-| Supply voltage VCC | VCC | 4.5 | 5 | 5.5 | V |  | 4 |-| Analog input voltage |  | -0.05 |  |  | V |  | 4 |-| Range of VCC (operating ratings) | VCC | 4.5 |  | 6.3 | VDC |  | 5 |-| Operating free-air temperature range (ADC0802/04LCWM) |  | 0 |  | 70 | °C |  | 5 |-| Junction-to-ambient thermal resistance (DW SOIC) | RθJA |  | 63.8 |  | °C/W | DW (SOIC), 20 pins | 4 |-| Junction-to-case (top) thermal resistance (DW SOIC) | RθJC(top) |  | 27.2 |  | °C/W | DW (SOIC), 20 pins | 4 |-| Junction-to-board thermal resistance (DW SOIC) | RθJB |  | 31.8 |  | °C/W | DW (SOIC), 20 pins | 4 |-| Total unadjusted error (ADC0804) |  | -1 |  | 1 | LSB | VREF/2=2.500 VDC | 5 |-| VREF/2 input resistance (ADC0804) |  | 0.75 |  | 1.1 | kΩ |  | 5 |-| Analog input voltage range V(+) or V(-) | V(+) or V(-) | -0.05 |  |  | V |  | 5 |-| Clock frequency | fCLK | 100 | 640 | 1460 | kHz | VCC = 5V | 5 |-| Clock duty cycle |  | 40 |  | 60 | % |  | 5 |-| Conversion rate in free-running mode | CR | 8770 |  | 9708 | conv/s | INTR tied to WR with CS = 0 VDC, fCLK = 640 kHz | 5 |-| Conversion time | TC | 103 |  | 114 | µs | fCLK = 640 kHz | 5 |-| Conversion time (clock periods) | TC | 66 |  | 73 | 1/fCLK | See (2) | 5 |-| Width of WR input (start pulse width) | tW(WR) | 100 |  |  | ns | CS = 0 VDC | 6 |-| Access time (delay from falling edge of RD to output data valid) | tACC |  | 135 | 200 | ns | CL = 100 pF | 6 |-| Tri-state control (delay from rising edge of RD to Hi-Z state) | t1H, t0H |  | 125 | 200 | ns | CL = 10 pF, RL = 10k | 6 |-| Delay from falling edge of WR or RD to reset of INTR | tWI, tRI |  | 300 | 450 | ns |  | 6 |-| Input capacitance of logic control inputs | CIN |  | 5 | 7.5 | pF |  | 6 |-| Tri-state output capacitance (data buffers) | COUT |  | 5 | 7.5 | pF |  | 6 |-| Logical 1 input voltage (except pin 4 CLK IN) | VIN(1) | 2 |  | 15 | V | VCC = 5.25 VDC | 6 |-| Logical 0 input voltage (except pin 4 CLK IN) | VIN(0) |  |  | 0.8 | V | VCC = 4.75 VDC | 6 |-| Logical 1 input current (all inputs) | IIN(1) |  | 0.005 | 1 | µA | VIN = 5 VDC | 6 |-| Logical 0 input current (all inputs) | IIN(0) | -1 | -0.005 |  | µA | VIN = 0 VDC | 6 |-| CLK IN (pin 4) positive going threshold voltage | VT+ | 2.7 | 3.1 | 3.5 | V |  | 6 |-| CLK IN (pin 4) negative going threshold voltage | VT- | 1.5 | 1.8 | 2.1 | V |  | 6 |-| CLK IN (pin 4) hysteresis | VH | 0.6 | 1.3 | 2 | V | (VT+)-(VT-) | 6 |-| CLK R logical 0 output voltage | VOUT(0) |  |  | 0.4 | V | IO = 360 µA, VCC = 4.75 VDC | 6 |-| CLK R logical 1 output voltage | VOUT(1) | 2.4 |  |  | V | IO = −360 µA, VCC = 4.75 VDC | 6 |-| Data outputs logical 0 output voltage | VOUT(0) |  |  | 0.4 | V | IOUT = 1.6 mA, VCC = 4.75 VDC | 6 |-| INTR output logical 0 output voltage | VOUT(0) |  |  | 0.4 | V | IOUT = 1.0 mA, VCC = 4.75 VDC | 6 |-| Logical 1 output voltage (IO = −360 µA) | VOUT(1) | 2.4 |  |  | V | IO = −360 µA, VCC = 4.75 VDC | 6 |-| Logical 1 output voltage (IO = −10 µA) | VOUT(1) | 4.5 |  |  | V | IO = −10 µA, VCC = 4.75 VDC | 6 |-| Tri-state disabled output leakage (all data buffers) | IOUT | -3 |  |  | µA | VOUT = 0 VDC | 6 |-| Tri-state disabled output leakage (all data buffers) | IOUT |  |  | 3 | µA | VOUT = 5 VDC | 6 |-| Output source current | ISOURCE | 4.5 | 6 |  | mA | VOUT short to GND, TA = 25°C | 6 |-| Output sink current | ISINK | 9 | 16 |  | mA | VOUT short to VCC, TA = 25°C | 6 |-| Supply current (ADC0804LCN/LCWM) | ICC |  | 1.9 | 2.5 | mA | fCLK = 640 kHz, VREF/2 = NC, TA = 25°C and CS = 5 V | 6 |+| Voltage at other inputs and outputs |  | -0.3 |  |  | V | max printed as VCC +0.3 | 4 |+| Lead Temperature, Surface Mount Package Vapor Phase (60 seconds) |  |  |  | 215 | °C | Surface mount package, vapor phase, 60 seconds | 4 |+| Lead Temperature, Surface Mount Package Infrared (15 seconds) |  |  |  | 220 | °C | Surface mount package, infrared, 15 seconds | 4 |+| Storage Temperature |  | -65 |  | 150 | °C |  | 4 |+| Package Dissipation |  |  |  | 875 | mW | TA = 25°C | 4 |+| Supply Voltage (VCC) | VCC | 4.5 | 5 | 5.5 | V |  | 4 |+| Operating Free-Air Temperature Range | TA | 0 |  | 70 | °C | ADC0802/04LCWM | 5 |+| Range of VCC (Operating Ratings) | VCC | 4.5 |  | 6.3 | V |  | 5 |+| Junction-to-ambient thermal resistance (RθJA) | RθJA |  | 63.8 |  | °C/W | DW (SOIC) package | 4 |+| Junction-to-case (top) thermal resistance (RθJC(top)) | RθJC(top) |  | 27.2 |  | °C/W | DW (SOIC) package | 4 |+| Junction-to-board thermal resistance (RθJB) | RθJB |  | 31.8 |  | °C/W | DW (SOIC) package | 4 |+| Junction-to-top characterization parameter (ψJT) | ψJT |  | 5.7 |  | °C/W | DW (SOIC) package | 4 |+| Junction-to-board characterization parameter (ψJB) | ψJB |  | 31.3 |  | °C/W | DW (SOIC) package | 4 |  ## CAD (KiCad official) @@ -102,7 +101,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/adc0804lcwmx.pdf) (58 pp, sha256 `44bd9e8071ef6612`, retrieved 2026-11-12, tier: manufacturer)+- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/adc0804lcwmx.pdf) (58 pp, sha256 `44bd9e8071ef6612`, retrieved 2026-11-13, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
package.json+32−33
@@ -1,6 +1,6 @@ {   "slug": "adc0804lcwmx",-  "version": "0.1.1",+  "version": "0.1.2",   "type": "component",   "description": "Texas Instruments Pre-ordered Chips, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -28,8 +28,7 @@     "viewers/symbol.html",     "viewers/footprint.html",     "adc0804lcwmx-hero.glb",-    "adc0804lcwmx-hero.overlay.json",-    "adc0804lcwmx-etched.glb"+    "adc0804lcwmx-hero.overlay.json"   ],   "component": {     "mpn": "ADC0804LCWMX",@@ -43,7 +42,7 @@       "symbol": "adc0804lcwmx.kicad_sym",       "footprint": "adc0804lcwmx.kicad_mod",       "model_3d": "adc0804lcwmx-hero.glb",-      "model_3d_plain": "adc0804lcwmx-etched.glb",+      "model_3d_plain": "adc0804lcwmx.glb",       "model_3d_step": "adc0804lcwmx-etched.step",       "model_3d_step_plain": "adc0804lcwmx.step",       "lbr": "adc0804lcwmx.lbr"@@ -54,7 +53,7 @@       "mouser": "926-ADC0804LCWMX"     },     "distributor_check": {-      "checked_at": "2026-11-12T08:04:04Z",+      "checked_at": "2026-11-13T01:56:24Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "296-36292-2-ND",@@ -70,121 +69,121 @@         "number": "1",         "name": "CS",         "type": "input",-        "description": "Chip select input; the converter is started when CS and WR are simultaneously low, and the data outputs are enabled when CS and RD are both low."+        "description": "Active-low chip select; CS and WR must both be low to start a conversion, and the datasheet assumes CS brackets the WR strobe."       },       {         "number": "2",         "name": "RD",         "type": "input",-        "description": "Read input; with CS also low, it resets the INTR flip-flop and enables the Tri-state output latches to provide the 8-bit digital outputs."+        "description": "Active-low read strobe that, with CS low, resets INTR and enables the tri-state output latches onto DB0 to DB7."       },       {         "number": "3",         "name": "WR",         "type": "input",-        "description": "Write input; a high-to-low transition on WR resets the internal SAR latches and shift register, and a conversion starts once CS and WR have both returned high."+        "description": "Active-low write strobe; the conversion starts on the low-to-high transition of WR while CS is low, and the WR pulse width must be at least 100 ns."       },       {         "number": "4",         "name": "CLK IN",         "type": "input",-        "description": "External clock input, or the node used with external RC elements when the internal clock generator is used."+        "description": "Clock input to a Schmitt trigger for an external clock of 100 kHz to 1460 kHz (640 kHz for specified accuracy, 40% to 60% duty cycle), or used with an external RC for self-clocking."       },       {         "number": "5",         "name": "INTR",         "type": "output",-        "description": "Interrupt request output that makes a high-to-low transition to signal the end of a conversion."+        "description": "Active-low interrupt request output that goes high-to-low at the end of a conversion and can be tied to WR for free-running operation."       },       {         "number": "6",         "name": "VIN(+)",         "type": "power_in",-        "description": "Differential analog input (positive); the analog input voltage must stay within GND - 0.05 V to VCC + 0.05 V."+        "description": "Positive differential analog input that must stay within GND - 0.05 V to VCC + 0.05 V, with input currents above 1 mA requiring an external diode."       },       {         "number": "7",         "name": "VIN(–)",         "type": "power_in",-        "description": "Differential analog input (negative); the analog input voltage must stay within GND - 0.05 V to VCC + 0.05 V."+        "description": "Negative differential analog input used for offset (tare) correction, with the same GND - 0.05 V to VCC + 0.05 V range, and the output code is 00 hex when VIN(-) is at or above VIN(+)."       },       {         "number": "8",         "name": "A GND",         "type": "power_in",-        "description": "Analog ground pin, to be used as a single-point analog ground separate from the logic ground points."+        "description": "Analog ground pin that should be wired to a single point separate from the logic ground and tied to D GND as the datasheet specifies."       },       {         "number": "9",         "name": "VREF/2",         "type": "power_in",-        "description": "Reference voltage input for adjusting the full-scale reading; any VREF/2 bypass capacitors should return to the analog ground point."+        "description": "Reference voltage input for full-scale adjustment with an internal gain of 2, so the full-scale span is twice the voltage on this pin, and it defaults to VCC/2 when unconnected."       },       {         "number": "10",         "name": "D GND",         "type": "power_in",-        "description": "Digital ground pin; the power supply bypass capacitor and the self-clocking capacitor should return to digital ground."+        "description": "Digital ground pin for the logic and output drivers, to which the supply bypass capacitor should return."       },       {         "number": "11",         "name": "DB7",         "type": "tri_state",-        "description": "Data bit 7 Tri-state digital output of the latched 8-bit conversion result."+        "description": "Tri-state data output bit 7 (MSB), valid only when CS and RD are both low, with a logic-0 output of 0.4 V max at 1.6 mA."       },       {         "number": "12",         "name": "DB6",         "type": "tri_state",-        "description": "Data bit 6 Tri-state digital output of the latched 8-bit conversion result."+        "description": "Tri-state data output bit 6, valid only when CS and RD are both low, with a logic-0 output of 0.4 V max at 1.6 mA."       },       {         "number": "13",         "name": "DB5",         "type": "tri_state",-        "description": "Data bit 5 Tri-state digital output of the latched 8-bit conversion result."+        "description": "Tri-state data output bit 5, valid only when CS and RD are both low, with a logic-0 output of 0.4 V max at 1.6 mA."       },       {         "number": "14",         "name": "DB4",         "type": "tri_state",-        "description": "Data bit 4 Tri-state digital output of the latched 8-bit conversion result."+        "description": "Tri-state data output bit 4, valid only when CS and RD are both low, with a logic-0 output of 0.4 V max at 1.6 mA."       },       {         "number": "15",         "name": "DB3",         "type": "tri_state",-        "description": "Data bit 3 Tri-state digital output of the latched 8-bit conversion result."+        "description": "Tri-state data output bit 3, valid only when CS and RD are both low, with a logic-0 output of 0.4 V max at 1.6 mA."       },       {         "number": "16",         "name": "DB2",         "type": "tri_state",-        "description": "Data bit 2 Tri-state digital output of the latched 8-bit conversion result."+        "description": "Tri-state data output bit 2, valid only when CS and RD are both low, with a logic-0 output of 0.4 V max at 1.6 mA."       },       {         "number": "17",         "name": "DB1",         "type": "tri_state",-        "description": "Data bit 1 Tri-state digital output of the latched 8-bit conversion result."+        "description": "Tri-state data output bit 1, valid only when CS and RD are both low, with a logic-0 output of 0.4 V max at 1.6 mA."       },       {         "number": "18",         "name": "DB0 (LSB)",         "type": "tri_state",-        "description": "Data bit 0, the least significant bit, Tri-state digital output of the latched 8-bit conversion result."+        "description": "Tri-state data output bit 0 (LSB), valid only when CS and RD are both low, with a logic-0 output of 0.4 V max at 1.6 mA."       },       {         "number": "19",         "name": "CLK R",         "type": "input",-        "description": "RC timing resistor input pin for the internal clock generator."+        "description": "RC timing resistor input for the internal clock generator, where heavy capacitive or DC loading should be avoided (loads under 50 pF are allowed)."       },       {         "number": "20",         "name": "VCC (or VREF)",         "type": "power_in",-        "description": "+5 V supply voltage (recommended 4.5 V to 5.5 V), also the upper reference input to the ladder."+        "description": "+5 V supply voltage, also the upper reference input to the ladder, with a recommended range of 4.5 V to 5.5 V and an absolute maximum of 6.5 V."       }     ],     "provenance": {@@ -198,11 +197,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pinout taken from the 'NFH and DW Package, 20-Pin PDIP and SOIC' table on page 3. The datasheet cove; The datasheet prints the MPN as ADC0804LCWMX with no /NOPB suffix; the package addendum on page 50 l; The datasheet lists DB7-DB0 as 'O' (output) but describes them as Tri-state output latches; I used K"+          "extractor flagged: The datasheet pin table labels DB0 to DB7 as 'O' (output), but the text describes them as tri-state ; The datasheet pin table labels CLK R as 'I' (input), but it is an RC timing pin for the internal clo; The pinout is taken from the page-3 table, which covers both the NFH (PDIP) and DW (SOIC) packages w"         ],-        "pages_sent": 15,-        "cost_usd": 0.0749,-        "at": "2026-11-12T08:03:31"+        "pages_sent": 58,+        "cost_usd": 0.1879,+        "at": "2026-11-13T01:56:12"       },       "datasheet": {         "url": "https://www.ti.com/lit/ds/symlink/adc0804lcwmx.pdf",@@ -239,7 +238,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "59a10b341e6972b31d81802a048060326da627d8b92dcf4263064f4f62ec808e",-        "checked": "2026-11-12",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -257,13 +256,13 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "e5f218e52dbe91f62bbb90f8e3dad6cdb2348568b7a55db0bd61fb08ceb0dfc9",-        "checked": "2026-11-12",+        "sha256": "2bd4bfeb9f9d2ce05e515489f8ef859e97685380af1b2379e72e5f6964829ae2",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "DW0020A",+      "package_code": "DW",       "source_page": 55,       "D": {         "nom_mm": 12.8,
page.json+35−34
@@ -4,7 +4,7 @@   "slug": "adc0804lcwmx",   "title": "ADC0804LCWMX",   "brief": "Texas Instruments Pre-ordered Chips, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.1",+  "version": "0.1.2",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -25,7 +25,7 @@       "symbol": "adc0804lcwmx.kicad_sym",       "footprint": "adc0804lcwmx.kicad_mod",       "model_3d": "adc0804lcwmx-hero.glb",-      "model_3d_plain": "adc0804lcwmx-etched.glb",+      "model_3d_plain": "adc0804lcwmx.glb",       "model_3d_step": "adc0804lcwmx-etched.step",       "model_3d_step_plain": "adc0804lcwmx.step",       "lbr": "adc0804lcwmx.lbr"@@ -36,7 +36,7 @@       "mouser": "926-ADC0804LCWMX"     },     "distributor_check": {-      "checked_at": "2026-11-12T08:04:04Z",+      "checked_at": "2026-11-13T01:56:24Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "296-36292-2-ND",@@ -52,121 +52,121 @@         "number": "1",         "name": "CS",         "type": "input",-        "description": "Chip select input; the converter is started when CS and WR are simultaneously low, and the data outputs are enabled when CS and RD are both low."+        "description": "Active-low chip select; CS and WR must both be low to start a conversion, and the datasheet assumes CS brackets the WR strobe."       },       {         "number": "2",         "name": "RD",         "type": "input",-        "description": "Read input; with CS also low, it resets the INTR flip-flop and enables the Tri-state output latches to provide the 8-bit digital outputs."+        "description": "Active-low read strobe that, with CS low, resets INTR and enables the tri-state output latches onto DB0 to DB7."       },       {         "number": "3",         "name": "WR",         "type": "input",-        "description": "Write input; a high-to-low transition on WR resets the internal SAR latches and shift register, and a conversion starts once CS and WR have both returned high."+        "description": "Active-low write strobe; the conversion starts on the low-to-high transition of WR while CS is low, and the WR pulse width must be at least 100 ns."       },       {         "number": "4",         "name": "CLK IN",         "type": "input",-        "description": "External clock input, or the node used with external RC elements when the internal clock generator is used."+        "description": "Clock input to a Schmitt trigger for an external clock of 100 kHz to 1460 kHz (640 kHz for specified accuracy, 40% to 60% duty cycle), or used with an external RC for self-clocking."       },       {         "number": "5",         "name": "INTR",         "type": "output",-        "description": "Interrupt request output that makes a high-to-low transition to signal the end of a conversion."+        "description": "Active-low interrupt request output that goes high-to-low at the end of a conversion and can be tied to WR for free-running operation."       },       {         "number": "6",         "name": "VIN(+)",         "type": "power_in",-        "description": "Differential analog input (positive); the analog input voltage must stay within GND - 0.05 V to VCC + 0.05 V."+        "description": "Positive differential analog input that must stay within GND - 0.05 V to VCC + 0.05 V, with input currents above 1 mA requiring an external diode."       },       {         "number": "7",         "name": "VIN(–)",         "type": "power_in",-        "description": "Differential analog input (negative); the analog input voltage must stay within GND - 0.05 V to VCC + 0.05 V."+        "description": "Negative differential analog input used for offset (tare) correction, with the same GND - 0.05 V to VCC + 0.05 V range, and the output code is 00 hex when VIN(-) is at or above VIN(+)."       },       {         "number": "8",         "name": "A GND",         "type": "power_in",-        "description": "Analog ground pin, to be used as a single-point analog ground separate from the logic ground points."+        "description": "Analog ground pin that should be wired to a single point separate from the logic ground and tied to D GND as the datasheet specifies."       },       {         "number": "9",         "name": "VREF/2",         "type": "power_in",-        "description": "Reference voltage input for adjusting the full-scale reading; any VREF/2 bypass capacitors should return to the analog ground point."+        "description": "Reference voltage input for full-scale adjustment with an internal gain of 2, so the full-scale span is twice the voltage on this pin, and it defaults to VCC/2 when unconnected."       },       {         "number": "10",         "name": "D GND",         "type": "power_in",-        "description": "Digital ground pin; the power supply bypass capacitor and the self-clocking capacitor should return to digital ground."+        "description": "Digital ground pin for the logic and output drivers, to which the supply bypass capacitor should return."       },       {         "number": "11",         "name": "DB7",         "type": "tri_state",-        "description": "Data bit 7 Tri-state digital output of the latched 8-bit conversion result."+        "description": "Tri-state data output bit 7 (MSB), valid only when CS and RD are both low, with a logic-0 output of 0.4 V max at 1.6 mA."       },       {         "number": "12",         "name": "DB6",         "type": "tri_state",-        "description": "Data bit 6 Tri-state digital output of the latched 8-bit conversion result."+        "description": "Tri-state data output bit 6, valid only when CS and RD are both low, with a logic-0 output of 0.4 V max at 1.6 mA."       },       {         "number": "13",         "name": "DB5",         "type": "tri_state",-        "description": "Data bit 5 Tri-state digital output of the latched 8-bit conversion result."+        "description": "Tri-state data output bit 5, valid only when CS and RD are both low, with a logic-0 output of 0.4 V max at 1.6 mA."       },       {         "number": "14",         "name": "DB4",         "type": "tri_state",-        "description": "Data bit 4 Tri-state digital output of the latched 8-bit conversion result."+        "description": "Tri-state data output bit 4, valid only when CS and RD are both low, with a logic-0 output of 0.4 V max at 1.6 mA."       },       {         "number": "15",         "name": "DB3",         "type": "tri_state",-        "description": "Data bit 3 Tri-state digital output of the latched 8-bit conversion result."+        "description": "Tri-state data output bit 3, valid only when CS and RD are both low, with a logic-0 output of 0.4 V max at 1.6 mA."       },       {         "number": "16",         "name": "DB2",         "type": "tri_state",-        "description": "Data bit 2 Tri-state digital output of the latched 8-bit conversion result."+        "description": "Tri-state data output bit 2, valid only when CS and RD are both low, with a logic-0 output of 0.4 V max at 1.6 mA."       },       {         "number": "17",         "name": "DB1",         "type": "tri_state",-        "description": "Data bit 1 Tri-state digital output of the latched 8-bit conversion result."+        "description": "Tri-state data output bit 1, valid only when CS and RD are both low, with a logic-0 output of 0.4 V max at 1.6 mA."       },       {         "number": "18",         "name": "DB0 (LSB)",         "type": "tri_state",-        "description": "Data bit 0, the least significant bit, Tri-state digital output of the latched 8-bit conversion result."+        "description": "Tri-state data output bit 0 (LSB), valid only when CS and RD are both low, with a logic-0 output of 0.4 V max at 1.6 mA."       },       {         "number": "19",         "name": "CLK R",         "type": "input",-        "description": "RC timing resistor input pin for the internal clock generator."+        "description": "RC timing resistor input for the internal clock generator, where heavy capacitive or DC loading should be avoided (loads under 50 pF are allowed)."       },       {         "number": "20",         "name": "VCC (or VREF)",         "type": "power_in",-        "description": "+5 V supply voltage (recommended 4.5 V to 5.5 V), also the upper reference input to the ladder."+        "description": "+5 V supply voltage, also the upper reference input to the ladder, with a recommended range of 4.5 V to 5.5 V and an absolute maximum of 6.5 V."       }     ],     "provenance": {@@ -180,11 +180,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pinout taken from the 'NFH and DW Package, 20-Pin PDIP and SOIC' table on page 3. The datasheet cove; The datasheet prints the MPN as ADC0804LCWMX with no /NOPB suffix; the package addendum on page 50 l; The datasheet lists DB7-DB0 as 'O' (output) but describes them as Tri-state output latches; I used K"+          "extractor flagged: The datasheet pin table labels DB0 to DB7 as 'O' (output), but the text describes them as tri-state ; The datasheet pin table labels CLK R as 'I' (input), but it is an RC timing pin for the internal clo; The pinout is taken from the page-3 table, which covers both the NFH (PDIP) and DW (SOIC) packages w"         ],-        "pages_sent": 15,-        "cost_usd": 0.0749,-        "at": "2026-11-12T08:03:31"+        "pages_sent": 58,+        "cost_usd": 0.1879,+        "at": "2026-11-13T01:56:12"       },       "datasheet": {         "url": "https://www.ti.com/lit/ds/symlink/adc0804lcwmx.pdf",@@ -221,7 +221,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "59a10b341e6972b31d81802a048060326da627d8b92dcf4263064f4f62ec808e",-        "checked": "2026-11-12",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -239,13 +239,13 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "e5f218e52dbe91f62bbb90f8e3dad6cdb2348568b7a55db0bd61fb08ceb0dfc9",-        "checked": "2026-11-12",+        "sha256": "2bd4bfeb9f9d2ce05e515489f8ef859e97685380af1b2379e72e5f6964829ae2",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "DW0020A",+      "package_code": "DW",       "source_page": 55,       "D": {         "nom_mm": 12.8,@@ -894,10 +894,11 @@     "viewers/symbol.html",     "viewers/footprint.html",     "adc0804lcwmx-hero.glb",-    "adc0804lcwmx-hero.overlay.json",-    "adc0804lcwmx-etched.glb"+    "adc0804lcwmx-hero.overlay.json"   ],   "visibility": {     "public": true-  }+  },+  "description": "Texas Instruments Pre-ordered Chips, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file