← Commit history
README.md+65−65
@@ -8,26 +8,26 @@ ADC0804LCWMX from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descrip  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | CS | input | Chip Select input; the converter is started with CS and WR low and data is read with CS and RD low. |-| 2 | RD | input | Read input; with CS low it enables the Tri-state output latches and resets the INTR flip-flop. |-| 3 | WR | input | Write input; with CS low it starts a conversion, and an external WR pulse is required during the first power-up cycle. |-| 4 | CLK IN | input | External clock input, or use the internal clock generator with external RC elements. |-| 5 | INTR | output | Interrupt request output that goes low at the end of a conversion. |-| 6 | VIN(+) | power_in | Differential analog input+; the analog input voltage range is GND - 0.05 V to VCC + 0.05 V. |-| 7 | VIN(-) | power_in | Differential analog input-; the analog input voltage range is GND - 0.05 V to VCC + 0.05 V. |-| 8 | A GND | power_in | Analog ground pin, which should be a single-point analog ground separate from the logic ground points. |-| 9 | VREF/2 | power_in | Reference voltage input for adjustment to correct full-scale reading; 2.5 V gives 19.53 mV per LSB. |-| 10 | D GND | power_in | Digital ground pin, to which the power supply bypass capacitor and self-clocking capacitor are returned. |-| 11 | DB7 | output | Data bit 7 (MSB) Tri-state output. |-| 12 | DB6 | output | Data bit 6 Tri-state output. |-| 13 | DB5 | output | Data bit 5 Tri-state output. |-| 14 | DB4 | output | Data bit 4 Tri-state output. |-| 15 | DB3 | output | Data bit 3 Tri-state output. |-| 16 | DB2 | output | Data bit 2 Tri-state output. |-| 17 | DB1 | output | Data bit 1 Tri-state output. |-| 18 | DB0 (LSB) | output | Data bit 0 (LSB) Tri-state output. |+| 1 | CS | input | Chip select input; the converter is started when CS and WR are simultaneously low, and the data outputs are enabled when CS and RD are both low. |+| 2 | RD | input | Read input; with CS also low, it resets the INTR flip-flop and enables the Tri-state output latches to provide the 8-bit digital outputs. |+| 3 | WR | input | Write input; a high-to-low transition on WR resets the internal SAR latches and shift register, and a conversion starts once CS and WR have both returned high. |+| 4 | CLK IN | input | External clock input, or the node used with external RC elements when the internal clock generator is used. |+| 5 | INTR | output | Interrupt request output that makes a high-to-low transition to signal the end of a conversion. |+| 6 | VIN(+) | power_in | Differential analog input (positive); the analog input voltage must stay within GND - 0.05 V to VCC + 0.05 V. |+| 7 | VIN(-) | power_in | Differential analog input (negative); the analog input voltage must stay within GND - 0.05 V to VCC + 0.05 V. |+| 8 | A GND | power_in | Analog ground pin, to be used as a single-point analog ground separate from the logic ground points. |+| 9 | VREF/2 | power_in | Reference voltage input for adjusting the full-scale reading; any VREF/2 bypass capacitors should return to the analog ground point. |+| 10 | D GND | power_in | Digital ground pin; the power supply bypass capacitor and the self-clocking capacitor should return to digital ground. |+| 11 | DB7 | tri_state | Data bit 7 Tri-state digital output of the latched 8-bit conversion result. |+| 12 | DB6 | tri_state | Data bit 6 Tri-state digital output of the latched 8-bit conversion result. |+| 13 | DB5 | tri_state | Data bit 5 Tri-state digital output of the latched 8-bit conversion result. |+| 14 | DB4 | tri_state | Data bit 4 Tri-state digital output of the latched 8-bit conversion result. |+| 15 | DB3 | tri_state | Data bit 3 Tri-state digital output of the latched 8-bit conversion result. |+| 16 | DB2 | tri_state | Data bit 2 Tri-state digital output of the latched 8-bit conversion result. |+| 17 | DB1 | tri_state | Data bit 1 Tri-state digital output of the latched 8-bit conversion result. |+| 18 | DB0 (LSB) | tri_state | Data bit 0, the least significant bit, Tri-state digital output of the latched 8-bit conversion result. | | 19 | CLK R | input | RC timing resistor input pin for the internal clock generator. |-| 20 | VCC (or VREF) | power_in | +5 V supply voltage (4.5 V to 5.5 V recommended, 6.5 V absolute maximum), also the upper reference input to the ladder. |+| 20 | VCC (or VREF) | power_in | +5 V supply voltage (recommended 4.5 V to 5.5 V), also the upper reference input to the ladder. |  ## Key specifications @@ -44,52 +44,52 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| ADC0804 Total Unadjusted Error |  | -1 |  | 1 | LSB | VREF/2=2.500 VDC | 5 |-| VREF/2 Input Resistance (Pin 9), ADC0804 |  | 0.75 |  | 1.1 | kΩ | ADC0804 | 5 |-| Conversion Time | TC | 103 |  | 114 | µs | fCLK = 640 kHz | 5 |-| Conversion Time | TC | 66 |  | 73 | 1/fCLK | See (2) | 5 |-| Clock Frequency | fCLK | 100 | 640 | 1460 | kHz | VCC = 5V | 5 |-| Clock Duty Cycle |  | 40 |  | 60 | % |  | 5 |-| Conversion Rate in Free-Running Mode | CR | 8770 |  | 9708 | conv/s | INTR tied to WR with CS = 0 VDC, fCLK = 640 kHz | 5 |-| Width of WR Input (Start Pulse Width) | tW(WR) |  |  | 100 | ns | CS = 0 VDC | 6 |-| Access Time | tACC |  | 135 | 200 | ns | CL = 100 pF | 6 |-| Tri-State Control Delay | t1H, t0H |  | 125 | 200 | ns | CL = 10 pF, RL = 10k | 6 |-| Delay from Falling Edge of WR or RD to Reset of INTR | tWI, tRI |  | 300 | 450 | ns |  | 6 |-| Input Capacitance of Logic Control Inputs | CIN |  | 5 | 7.5 | pF |  | 6 |-| Tri-State Output Capacitance | COUT |  | 5 | 7.5 | pF | Data Buffers | 6 |-| Logical 1 Input Voltage | VIN(1) | 2 |  | 15 | VDC | VCC = 5.25 VDC, except Pin 4 CLK IN | 6 |-| Logical 0 Input Voltage | VIN(0) |  |  | 0.8 | VDC | VCC = 4.75 VDC, except Pin 4 CLK IN | 6 |-| Logical 1 Input Current | IIN(1) |  | 0.005 | 1 | µADC | VIN = 5 VDC | 6 |-| Logical 0 Input Current | IIN(0) | -1 | -0.005 |  | µADC | VIN = 0 VDC | 6 |-| CLK IN Positive Going Threshold Voltage | VT+ | 2.7 | 3.1 | 3.5 | VDC |  | 6 |-| CLK IN Negative Going Threshold Voltage | VT- | 1.5 | 1.8 | 2.1 | VDC |  | 6 |-| CLK IN Hysteresis (VT+)-(VT-) | VH | 0.6 | 1.3 | 2 | VDC |  | 6 |-| Logical 0 CLK R Output Voltage | VOUT(0) |  |  | 0.4 | VDC | IO = 360 µA, VCC = 4.75 VDC | 6 |-| Logical 1 CLK R Output Voltage | VOUT(1) | 2.4 |  |  | VDC | IO = -360 µA, VCC = 4.75 VDC | 6 |-| Logical 0 Output Voltage, Data Outputs | VOUT(0) |  |  | 0.4 | VDC | IOUT = 1.6 mA, VCC = 4.75 VDC | 6 |-| Logical 0 Output Voltage, INTR Output | VOUT(0) |  |  | 0.4 | VDC | IOUT = 1.0 mA, VCC = 4.75 VDC | 6 |-| Logical 1 Output Voltage | VOUT(1) | 2.4 |  |  | VDC | IO = -360 µA, VCC = 4.75 VDC | 6 |-| Logical 1 Output Voltage | VOUT(1) | 4.5 |  |  | VDC | IO = -10 µA, VCC = 4.75 VDC | 6 |-| Tri-State Disabled Output Leakage (All Data Buffers) | IOUT | -3 |  |  | µADC | VOUT = 0 VDC | 6 |-| Tri-State Disabled Output Leakage (All Data Buffers) | IOUT |  |  | 3 | µADC | VOUT = 5 VDC | 6 |-| Output Source Current | ISOURCE | 4.5 |  | 6 | mADC | VOUT Short to GND, TA = 25°C | 6 |-| Output Sink Current | ISINK | 9 |  | 16 | mADC | VOUT Short to VCC, TA = 25°C | 6 |-| Supply Current (Includes Ladder Current), ADC0804LCN/LCWM | ICC |  | 1.9 | 2.5 | mA | fCLK = 640 kHz, VREF/2 = NC, TA = 25°C and CS = 5 V | 6 | | Supply voltage | VCC |  |  | 6.5 | V |  | 4 |-| Voltage at logic control inputs |  | -0.3 |  | 18 | V |  | 4 |-| Lead Temperature, Surface Mount Vapor Phase |  |  |  | 215 | °C | 60 seconds | 4 |-| Lead Temperature, Surface Mount Infrared |  |  |  | 220 | °C | 15 seconds | 4 |-| Storage Temperature |  | -65 |  | 150 | °C |  | 4 |-| Package Dissipation |  |  |  | 875 | mW | TA = 25°C | 4 |-| ESD HBM | V(ESD) | -800 |  | 800 | V | Human body model, ANSI/ESDA/JEDEC JS-001 | 4 |-| VCC | VCC | 4.5 | 5 | 5.5 | V |  | 4 |-| Operating Temperature, ADC0802/04LCWM |  | 0 |  | 70 | °C |  | 5 |-| Range of VCC | VCC | 4.5 |  | 6.3 | VDC | Operating Ratings | 5 |-| Junction-to-ambient thermal resistance | RθJA |  | 63.8 |  | °C/W | DW (SOIC) 20 pins | 4 |-| Junction-to-case (top) thermal resistance | RθJC(top) |  | 27.2 |  | °C/W | DW (SOIC) 20 pins | 4 |-| Junction-to-board thermal resistance | RθJB |  | 31.8 |  | °C/W | DW (SOIC) 20 pins | 4 |-| Junction-to-top characterization parameter | ψJT |  | 5.7 |  | °C/W | DW (SOIC) 20 pins | 4 |-| Junction-to-board characterization parameter | ψJB |  | 31.3 |  | °C/W | DW (SOIC) 20 pins | 4 |+| Logic control inputs voltage |  | -0.3 |  | 18 | V |  | 4 |+| Voltage at other inputs and outputs |  | -0.3 |  |  | V |  | 4 |+| Lead temperature, surface mount vapor phase |  |  |  | 215 | °C | Vapor phase (60 seconds) | 4 |+| Lead temperature, surface mount infrared |  |  |  | 220 | °C | Infrared (15 seconds) | 4 |+| Storage temperature |  | -65 |  | 150 | °C |  | 4 |+| Package dissipation |  |  |  | 875 | mW | TA = 25°C | 4 |+| Supply voltage VCC | VCC | 4.5 | 5 | 5.5 | V |  | 4 |+| Analog input voltage |  | -0.05 |  |  | V |  | 4 |+| Range of VCC (operating ratings) | VCC | 4.5 |  | 6.3 | VDC |  | 5 |+| Operating free-air temperature range (ADC0802/04LCWM) |  | 0 |  | 70 | °C |  | 5 |+| Junction-to-ambient thermal resistance (DW SOIC) | RθJA |  | 63.8 |  | °C/W | DW (SOIC), 20 pins | 4 |+| Junction-to-case (top) thermal resistance (DW SOIC) | RθJC(top) |  | 27.2 |  | °C/W | DW (SOIC), 20 pins | 4 |+| Junction-to-board thermal resistance (DW SOIC) | RθJB |  | 31.8 |  | °C/W | DW (SOIC), 20 pins | 4 |+| Total unadjusted error (ADC0804) |  | -1 |  | 1 | LSB | VREF/2=2.500 VDC | 5 |+| VREF/2 input resistance (ADC0804) |  | 0.75 |  | 1.1 | kΩ |  | 5 |+| Analog input voltage range V(+) or V(-) | V(+) or V(-) | -0.05 |  |  | V |  | 5 |+| Clock frequency | fCLK | 100 | 640 | 1460 | kHz | VCC = 5V | 5 |+| Clock duty cycle |  | 40 |  | 60 | % |  | 5 |+| Conversion rate in free-running mode | CR | 8770 |  | 9708 | conv/s | INTR tied to WR with CS = 0 VDC, fCLK = 640 kHz | 5 |+| Conversion time | TC | 103 |  | 114 | µs | fCLK = 640 kHz | 5 |+| Conversion time (clock periods) | TC | 66 |  | 73 | 1/fCLK | See (2) | 5 |+| Width of WR input (start pulse width) | tW(WR) | 100 |  |  | ns | CS = 0 VDC | 6 |+| Access time (delay from falling edge of RD to output data valid) | tACC |  | 135 | 200 | ns | CL = 100 pF | 6 |+| Tri-state control (delay from rising edge of RD to Hi-Z state) | t1H, t0H |  | 125 | 200 | ns | CL = 10 pF, RL = 10k | 6 |+| Delay from falling edge of WR or RD to reset of INTR | tWI, tRI |  | 300 | 450 | ns |  | 6 |+| Input capacitance of logic control inputs | CIN |  | 5 | 7.5 | pF |  | 6 |+| Tri-state output capacitance (data buffers) | COUT |  | 5 | 7.5 | pF |  | 6 |+| Logical 1 input voltage (except pin 4 CLK IN) | VIN(1) | 2 |  | 15 | V | VCC = 5.25 VDC | 6 |+| Logical 0 input voltage (except pin 4 CLK IN) | VIN(0) |  |  | 0.8 | V | VCC = 4.75 VDC | 6 |+| Logical 1 input current (all inputs) | IIN(1) |  | 0.005 | 1 | µA | VIN = 5 VDC | 6 |+| Logical 0 input current (all inputs) | IIN(0) | -1 | -0.005 |  | µA | VIN = 0 VDC | 6 |+| CLK IN (pin 4) positive going threshold voltage | VT+ | 2.7 | 3.1 | 3.5 | V |  | 6 |+| CLK IN (pin 4) negative going threshold voltage | VT- | 1.5 | 1.8 | 2.1 | V |  | 6 |+| CLK IN (pin 4) hysteresis | VH | 0.6 | 1.3 | 2 | V | (VT+)-(VT-) | 6 |+| CLK R logical 0 output voltage | VOUT(0) |  |  | 0.4 | V | IO = 360 µA, VCC = 4.75 VDC | 6 |+| CLK R logical 1 output voltage | VOUT(1) | 2.4 |  |  | V | IO = −360 µA, VCC = 4.75 VDC | 6 |+| Data outputs logical 0 output voltage | VOUT(0) |  |  | 0.4 | V | IOUT = 1.6 mA, VCC = 4.75 VDC | 6 |+| INTR output logical 0 output voltage | VOUT(0) |  |  | 0.4 | V | IOUT = 1.0 mA, VCC = 4.75 VDC | 6 |+| Logical 1 output voltage (IO = −360 µA) | VOUT(1) | 2.4 |  |  | V | IO = −360 µA, VCC = 4.75 VDC | 6 |+| Logical 1 output voltage (IO = −10 µA) | VOUT(1) | 4.5 |  |  | V | IO = −10 µA, VCC = 4.75 VDC | 6 |+| Tri-state disabled output leakage (all data buffers) | IOUT | -3 |  |  | µA | VOUT = 0 VDC | 6 |+| Tri-state disabled output leakage (all data buffers) | IOUT |  |  | 3 | µA | VOUT = 5 VDC | 6 |+| Output source current | ISOURCE | 4.5 | 6 |  | mA | VOUT short to GND, TA = 25°C | 6 |+| Output sink current | ISINK | 9 | 16 |  | mA | VOUT short to VCC, TA = 25°C | 6 |+| Supply current (ADC0804LCN/LCWM) | ICC |  | 1.9 | 2.5 | mA | fCLK = 640 kHz, VREF/2 = NC, TA = 25°C and CS = 5 V | 6 |  ## CAD (KiCad official) @@ -103,7 +103,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing:  - **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/adc0804lcwmx.pdf) (58 pp, sha256 `44bd9e8071ef6612`, retrieved 2026-11-12, tier: manufacturer)-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).  [Datasheet PDF](docs/adc0804lcwmx-datasheet.pdf)
adc0804lcwmx-hero.overlay.json+527−522
@@ -1,524 +1,529 @@ {-  "spec": "adom-hero 1.4",-  "mpn": "ADC0804LCWMX",-  "kind": "component + footprint reference art",-  "board_use": false,-  "plane_z_mm": -0.02,-  "units": "metre",-  "upAxis": "Z",-  "layers": {-    "pad_outlines": {-      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-      "rgba": [-        0.0,-        0.902,-        0.863,-        0.5-      ],-      "pads": 20,-      "span_mm": 12.03,-      "dash_mm": 0.3008,-      "gap_mm": 0.1804,-      "pad_stroke_mm": 0.0722-    },-    "silkscreen": {-      "material": "Silkscreen reference lines - 30 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.3-      ],-      "footprint_items": 7,-      "pin1": {-        "source": "footprint silkscreen",-        "pad": "1"-      }-    },-    "signal_names": {-      "material": "Signal names - 50 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.5-      ],-      "font": "DejaVu Sans Mono",-      "labels": 20,-      "sides": "top + mirrored underside (single-sided)",-      "fallback_to_pad_number": 0-    }-  },-  "align": {-    "ok": true,-    "centre_offset_mm": 0.0,-    "tolerance_mm": 0.962,-    "orientation_flipped": false,-    "contacts_bbox_mm": [-      -5.15,-      5.15,-      -5.92,-      5.92-    ],-    "pads_bbox_mm": [-      -5.675,-      5.675,-      -6.015,-      6.015-    ],-    "seating_z_mm": -0.0-  },-  "sources": {-    "glb": "adc0804lcwmx-etched.glb",-    "glb_sha256": "4cdff50796fabf2b874f7cd9ae0560b970cfa9ee863735625981130db0473102",-    "footprint": "adc0804lcwmx.kicad_mod",-    "footprint_sha256": "9783bc19f518a72442ddbfe6289e767a42c3d23358b65c3447b6a36bdd0e7dcf",-    "pins": "page.json component.pins",-    "pins_sha256": "611f0a3ffdf7befbb4251fcafdbce254db8d95f49df07185c1517fc600f3f0a0"-  },-  "generator": "adom-wiki 1.8.22 (component_hero)",-  "labels": [-    {-      "pad": "1",-      "text": "CS",-      "x": -5.825,-      "y": -5.715,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "2",-      "text": "RD",-      "x": -5.825,-      "y": -4.445,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "3",-      "text": "WR",-      "x": -5.825,-      "y": -3.175,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "4",-      "text": "CLK IN",-      "x": -5.825,-      "y": -1.905,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "5",-      "text": "INTR",-      "x": -5.825,-      "y": -0.635,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "6",-      "text": "VIN(+)",-      "x": -5.825,-      "y": 0.635,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "7",-      "text": "VIN(–)",-      "x": -5.825,-      "y": 1.905,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "8",-      "text": "A GND",-      "x": -5.825,-      "y": 3.175,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "9",-      "text": "VREF/2",-      "x": -5.825,-      "y": 4.445,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "10",-      "text": "D GND",-      "x": -5.825,-      "y": 5.715,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "11",-      "text": "DB7",-      "x": 5.825,-      "y": 5.715,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "12",-      "text": "DB6",-      "x": 5.825,-      "y": 4.445,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "13",-      "text": "DB5",-      "x": 5.825,-      "y": 3.175,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "14",-      "text": "DB4",-      "x": 5.825,-      "y": 1.905,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "15",-      "text": "DB3",-      "x": 5.825,-      "y": 0.635,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "16",-      "text": "DB2",-      "x": 5.825,-      "y": -0.635,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "17",-      "text": "DB1",-      "x": 5.825,-      "y": -1.905,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "18",-      "text": "DB0 (LSB)",-      "x": 5.825,-      "y": -3.175,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "19",-      "text": "CLK R",-      "x": 5.825,-      "y": -4.445,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "20",-      "text": "VCC (or VREF)",-      "x": 5.825,-      "y": -5.715,-      "align": "left",-      "vertical": false,-      "h": 0.6-    }+ "spec": "adom-hero 1.4",+ "mpn": "ADC0804LCWMX",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 20,+   "span_mm": 12.03,+   "dash_mm": 0.3008,+   "gap_mm": 0.1804,+   "pad_stroke_mm": 0.0722+  },+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 7,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }+  },+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 20,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "board_underside": true,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 0.962,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -5.15,+   5.15,+   -5.92,+   5.92+  ],+  "pads_bbox_mm": [+   -5.675,+   5.675,+   -6.015,+   6.015   ],-  "pads": [-    {-      "number": "1",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -5.715-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "2",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -4.445-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "3",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -3.175-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "4",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -1.905-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "5",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        -0.635-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "6",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        0.635-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "7",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        1.905-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "8",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        3.175-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "9",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        4.445-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "10",-      "shape": "roundrect",-      "center_mm": [-        -4.65,-        5.715-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "11",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        5.715-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "12",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        4.445-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "13",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        3.175-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "14",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        1.905-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "15",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        0.635-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "16",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -0.635-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "17",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -1.905-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "18",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -3.175-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "19",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -4.445-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "20",-      "shape": "roundrect",-      "center_mm": [-        4.65,-        -5.715-      ],-      "size_mm": [-        2.05,-        0.6-      ],-      "rot": 0.0-    }-  ]-}+  "seating_z_mm": -0.0+ },+ "sources": {+  "glb": "adc0804lcwmx-etched.glb",+  "glb_sha256": "4cdff50796fabf2b874f7cd9ae0560b970cfa9ee863735625981130db0473102",+  "footprint": "adc0804lcwmx.kicad_mod",+  "footprint_sha256": "9783bc19f518a72442ddbfe6289e767a42c3d23358b65c3447b6a36bdd0e7dcf",+  "pins": "page.json component.pins",+  "pins_sha256": "611f0a3ffdf7befbb4251fcafdbce254db8d95f49df07185c1517fc600f3f0a0"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "CS",+   "x": -5.825,+   "y": -5.715,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "2",+   "text": "RD",+   "x": -5.825,+   "y": -4.445,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "3",+   "text": "WR",+   "x": -5.825,+   "y": -3.175,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "4",+   "text": "CLK IN",+   "x": -5.825,+   "y": -1.905,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "5",+   "text": "INTR",+   "x": -5.825,+   "y": -0.635,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "6",+   "text": "VIN(+)",+   "x": -5.825,+   "y": 0.635,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "7",+   "text": "VIN(\u2013)",+   "x": -5.825,+   "y": 1.905,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "8",+   "text": "A GND",+   "x": -5.825,+   "y": 3.175,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "9",+   "text": "VREF/2",+   "x": -5.825,+   "y": 4.445,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "10",+   "text": "D GND",+   "x": -5.825,+   "y": 5.715,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "11",+   "text": "DB7",+   "x": 5.825,+   "y": 5.715,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "12",+   "text": "DB6",+   "x": 5.825,+   "y": 4.445,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "13",+   "text": "DB5",+   "x": 5.825,+   "y": 3.175,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "14",+   "text": "DB4",+   "x": 5.825,+   "y": 1.905,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "15",+   "text": "DB3",+   "x": 5.825,+   "y": 0.635,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "16",+   "text": "DB2",+   "x": 5.825,+   "y": -0.635,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "17",+   "text": "DB1",+   "x": 5.825,+   "y": -1.905,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "18",+   "text": "DB0 (LSB)",+   "x": 5.825,+   "y": -3.175,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "19",+   "text": "CLK R",+   "x": 5.825,+   "y": -4.445,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "20",+   "text": "VCC (or VREF)",+   "x": 5.825,+   "y": -5.715,+   "align": "left",+   "vertical": false,+   "h": 0.6+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -5.715+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -4.445+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -3.175+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "4",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -1.905+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "5",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    -0.635+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "6",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    0.635+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "7",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    1.905+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "8",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    3.175+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "9",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    4.445+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "10",+   "shape": "roundrect",+   "center_mm": [+    -4.65,+    5.715+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "11",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    5.715+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "12",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    4.445+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "13",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    3.175+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "14",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    1.905+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "15",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    0.635+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "16",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -0.635+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "17",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -1.905+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "18",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -3.175+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "19",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -4.445+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "20",+   "shape": "roundrect",+   "center_mm": [+    4.65,+    -5.715+   ],+   "size_mm": [+    2.05,+    0.6+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
adc0804lcwmx.kicad_sym+8−8
@@ -56,35 +56,35 @@       (name "CLK R" (effects (font (size 1.27 1.27))))       (number "19" (effects (font (size 1.27 1.27))))     )-    (pin output line (at 17.78 5.08 180) (length 5.08)+    (pin tri_state line (at 17.78 5.08 180) (length 5.08)       (name "DB0 (LSB)" (effects (font (size 1.27 1.27))))       (number "18" (effects (font (size 1.27 1.27))))     )-    (pin output line (at 17.78 2.54 180) (length 5.08)+    (pin tri_state line (at 17.78 2.54 180) (length 5.08)       (name "DB1" (effects (font (size 1.27 1.27))))       (number "17" (effects (font (size 1.27 1.27))))     )-    (pin output line (at 17.78 0.00 180) (length 5.08)+    (pin tri_state line (at 17.78 0.00 180) (length 5.08)       (name "DB2" (effects (font (size 1.27 1.27))))       (number "16" (effects (font (size 1.27 1.27))))     )-    (pin output line (at 17.78 -2.54 180) (length 5.08)+    (pin tri_state line (at 17.78 -2.54 180) (length 5.08)       (name "DB3" (effects (font (size 1.27 1.27))))       (number "15" (effects (font (size 1.27 1.27))))     )-    (pin output line (at 17.78 -5.08 180) (length 5.08)+    (pin tri_state line (at 17.78 -5.08 180) (length 5.08)       (name "DB4" (effects (font (size 1.27 1.27))))       (number "14" (effects (font (size 1.27 1.27))))     )-    (pin output line (at 17.78 -7.62 180) (length 5.08)+    (pin tri_state line (at 17.78 -7.62 180) (length 5.08)       (name "DB5" (effects (font (size 1.27 1.27))))       (number "13" (effects (font (size 1.27 1.27))))     )-    (pin output line (at 17.78 -10.16 180) (length 5.08)+    (pin tri_state line (at 17.78 -10.16 180) (length 5.08)       (name "DB6" (effects (font (size 1.27 1.27))))       (number "12" (effects (font (size 1.27 1.27))))     )-    (pin output line (at 17.78 -12.70 180) (length 5.08)+    (pin tri_state line (at 17.78 -12.70 180) (length 5.08)       (name "DB7" (effects (font (size 1.27 1.27))))       (number "11" (effects (font (size 1.27 1.27))))     )
adc0804lcwmx.lbr+8−8
@@ -117,14 +117,14 @@   <pin name="D_GND" x="-17.78" y="-12.7" length="middle" direction="pwr"/>   <pin name="VCC_or_VREF" x="17.78" y="10.16" length="middle" direction="pwr" rot="R180"/>   <pin name="CLK_R" x="17.78" y="7.62" length="middle" direction="in" rot="R180"/>-  <pin name="DB0_LSB" x="17.78" y="5.08" length="middle" direction="out" rot="R180"/>-  <pin name="DB1" x="17.78" y="2.54" length="middle" direction="out" rot="R180"/>-  <pin name="DB2" x="17.78" y="0" length="middle" direction="out" rot="R180"/>-  <pin name="DB3" x="17.78" y="-2.54" length="middle" direction="out" rot="R180"/>-  <pin name="DB4" x="17.78" y="-5.08" length="middle" direction="out" rot="R180"/>-  <pin name="DB5" x="17.78" y="-7.62" length="middle" direction="out" rot="R180"/>-  <pin name="DB6" x="17.78" y="-10.16" length="middle" direction="out" rot="R180"/>-  <pin name="DB7" x="17.78" y="-12.7" length="middle" direction="out" rot="R180"/>+  <pin name="DB0_LSB" x="17.78" y="5.08" length="middle" direction="hiz" rot="R180"/>+  <pin name="DB1" x="17.78" y="2.54" length="middle" direction="hiz" rot="R180"/>+  <pin name="DB2" x="17.78" y="0" length="middle" direction="hiz" rot="R180"/>+  <pin name="DB3" x="17.78" y="-2.54" length="middle" direction="hiz" rot="R180"/>+  <pin name="DB4" x="17.78" y="-5.08" length="middle" direction="hiz" rot="R180"/>+  <pin name="DB5" x="17.78" y="-7.62" length="middle" direction="hiz" rot="R180"/>+  <pin name="DB6" x="17.78" y="-10.16" length="middle" direction="hiz" rot="R180"/>+  <pin name="DB7" x="17.78" y="-12.7" length="middle" direction="hiz" rot="R180"/> </symbol> </symbols> <devicesets>
package.json+34−34
@@ -1,6 +1,6 @@ {   "slug": "adc0804lcwmx",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Texas Instruments Pre-ordered Chips, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -54,7 +54,7 @@       "mouser": "926-ADC0804LCWMX"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:59:32Z",+      "checked_at": "2026-11-12T08:04:04Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "296-36292-2-ND",@@ -70,109 +70,109 @@         "number": "1",         "name": "CS",         "type": "input",-        "description": "Chip Select input; the converter is started with CS and WR low and data is read with CS and RD low."+        "description": "Chip select input; the converter is started when CS and WR are simultaneously low, and the data outputs are enabled when CS and RD are both low."       },       {         "number": "2",         "name": "RD",         "type": "input",-        "description": "Read input; with CS low it enables the Tri-state output latches and resets the INTR flip-flop."+        "description": "Read input; with CS also low, it resets the INTR flip-flop and enables the Tri-state output latches to provide the 8-bit digital outputs."       },       {         "number": "3",         "name": "WR",         "type": "input",-        "description": "Write input; with CS low it starts a conversion, and an external WR pulse is required during the first power-up cycle."+        "description": "Write input; a high-to-low transition on WR resets the internal SAR latches and shift register, and a conversion starts once CS and WR have both returned high."       },       {         "number": "4",         "name": "CLK IN",         "type": "input",-        "description": "External clock input, or use the internal clock generator with external RC elements."+        "description": "External clock input, or the node used with external RC elements when the internal clock generator is used."       },       {         "number": "5",         "name": "INTR",         "type": "output",-        "description": "Interrupt request output that goes low at the end of a conversion."+        "description": "Interrupt request output that makes a high-to-low transition to signal the end of a conversion."       },       {         "number": "6",         "name": "VIN(+)",         "type": "power_in",-        "description": "Differential analog input+; the analog input voltage range is GND - 0.05 V to VCC + 0.05 V."+        "description": "Differential analog input (positive); the analog input voltage must stay within GND - 0.05 V to VCC + 0.05 V."       },       {         "number": "7",         "name": "VIN(–)",         "type": "power_in",-        "description": "Differential analog input-; the analog input voltage range is GND - 0.05 V to VCC + 0.05 V."+        "description": "Differential analog input (negative); the analog input voltage must stay within GND - 0.05 V to VCC + 0.05 V."       },       {         "number": "8",         "name": "A GND",         "type": "power_in",-        "description": "Analog ground pin, which should be a single-point analog ground separate from the logic ground points."+        "description": "Analog ground pin, to be used as a single-point analog ground separate from the logic ground points."       },       {         "number": "9",         "name": "VREF/2",         "type": "power_in",-        "description": "Reference voltage input for adjustment to correct full-scale reading; 2.5 V gives 19.53 mV per LSB."+        "description": "Reference voltage input for adjusting the full-scale reading; any VREF/2 bypass capacitors should return to the analog ground point."       },       {         "number": "10",         "name": "D GND",         "type": "power_in",-        "description": "Digital ground pin, to which the power supply bypass capacitor and self-clocking capacitor are returned."+        "description": "Digital ground pin; the power supply bypass capacitor and the self-clocking capacitor should return to digital ground."       },       {         "number": "11",         "name": "DB7",-        "type": "output",-        "description": "Data bit 7 (MSB) Tri-state output."+        "type": "tri_state",+        "description": "Data bit 7 Tri-state digital output of the latched 8-bit conversion result."       },       {         "number": "12",         "name": "DB6",-        "type": "output",-        "description": "Data bit 6 Tri-state output."+        "type": "tri_state",+        "description": "Data bit 6 Tri-state digital output of the latched 8-bit conversion result."       },       {         "number": "13",         "name": "DB5",-        "type": "output",-        "description": "Data bit 5 Tri-state output."+        "type": "tri_state",+        "description": "Data bit 5 Tri-state digital output of the latched 8-bit conversion result."       },       {         "number": "14",         "name": "DB4",-        "type": "output",-        "description": "Data bit 4 Tri-state output."+        "type": "tri_state",+        "description": "Data bit 4 Tri-state digital output of the latched 8-bit conversion result."       },       {         "number": "15",         "name": "DB3",-        "type": "output",-        "description": "Data bit 3 Tri-state output."+        "type": "tri_state",+        "description": "Data bit 3 Tri-state digital output of the latched 8-bit conversion result."       },       {         "number": "16",         "name": "DB2",-        "type": "output",-        "description": "Data bit 2 Tri-state output."+        "type": "tri_state",+        "description": "Data bit 2 Tri-state digital output of the latched 8-bit conversion result."       },       {         "number": "17",         "name": "DB1",-        "type": "output",-        "description": "Data bit 1 Tri-state output."+        "type": "tri_state",+        "description": "Data bit 1 Tri-state digital output of the latched 8-bit conversion result."       },       {         "number": "18",         "name": "DB0 (LSB)",-        "type": "output",-        "description": "Data bit 0 (LSB) Tri-state output."+        "type": "tri_state",+        "description": "Data bit 0, the least significant bit, Tri-state digital output of the latched 8-bit conversion result."       },       {         "number": "19",@@ -184,7 +184,7 @@         "number": "20",         "name": "VCC (or VREF)",         "type": "power_in",-        "description": "+5 V supply voltage (4.5 V to 5.5 V recommended, 6.5 V absolute maximum), also the upper reference input to the ladder."+        "description": "+5 V supply voltage (recommended 4.5 V to 5.5 V), also the upper reference input to the ladder."       }     ],     "provenance": {@@ -192,17 +192,17 @@       "factory_chain": {         "factory": "2.0.0",         "extractor": "extract_pins 0.3",-        "primary_model": "claude-sonnet-5-5",+        "primary_model": "claude-haiku-5-5",         "primary_mode": "text",         "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The datasheet pin table does not label pin 11 as MSB. DB7 is described only as 'Data bit 7', so the "+          "extractor flagged: Pinout taken from the 'NFH and DW Package, 20-Pin PDIP and SOIC' table on page 3. The datasheet cove; The datasheet prints the MPN as ADC0804LCWMX with no /NOPB suffix; the package addendum on page 50 l; The datasheet lists DB7-DB0 as 'O' (output) but describes them as Tri-state output latches; I used K"         ],         "pages_sent": 15,-        "cost_usd": 0.1305,-        "at": "2026-11-12T04:59:21"+        "cost_usd": 0.0749,+        "at": "2026-11-12T08:03:31"       },       "datasheet": {         "url": "https://www.ti.com/lit/ds/symlink/adc0804lcwmx.pdf",@@ -257,7 +257,7 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "14e931e78578bf5f805132569ebbceef2ed4e35445414a4765db3aa4b1ddfc97",+        "sha256": "e5f218e52dbe91f62bbb90f8e3dad6cdb2348568b7a55db0bd61fb08ceb0dfc9",         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }
page.json+37−35
@@ -4,7 +4,7 @@   "slug": "adc0804lcwmx",   "title": "ADC0804LCWMX",   "brief": "Texas Instruments Pre-ordered Chips, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -36,7 +36,7 @@       "mouser": "926-ADC0804LCWMX"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:59:32Z",+      "checked_at": "2026-11-12T08:04:04Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "296-36292-2-ND",@@ -52,109 +52,109 @@         "number": "1",         "name": "CS",         "type": "input",-        "description": "Chip Select input; the converter is started with CS and WR low and data is read with CS and RD low."+        "description": "Chip select input; the converter is started when CS and WR are simultaneously low, and the data outputs are enabled when CS and RD are both low."       },       {         "number": "2",         "name": "RD",         "type": "input",-        "description": "Read input; with CS low it enables the Tri-state output latches and resets the INTR flip-flop."+        "description": "Read input; with CS also low, it resets the INTR flip-flop and enables the Tri-state output latches to provide the 8-bit digital outputs."       },       {         "number": "3",         "name": "WR",         "type": "input",-        "description": "Write input; with CS low it starts a conversion, and an external WR pulse is required during the first power-up cycle."+        "description": "Write input; a high-to-low transition on WR resets the internal SAR latches and shift register, and a conversion starts once CS and WR have both returned high."       },       {         "number": "4",         "name": "CLK IN",         "type": "input",-        "description": "External clock input, or use the internal clock generator with external RC elements."+        "description": "External clock input, or the node used with external RC elements when the internal clock generator is used."       },       {         "number": "5",         "name": "INTR",         "type": "output",-        "description": "Interrupt request output that goes low at the end of a conversion."+        "description": "Interrupt request output that makes a high-to-low transition to signal the end of a conversion."       },       {         "number": "6",         "name": "VIN(+)",         "type": "power_in",-        "description": "Differential analog input+; the analog input voltage range is GND - 0.05 V to VCC + 0.05 V."+        "description": "Differential analog input (positive); the analog input voltage must stay within GND - 0.05 V to VCC + 0.05 V."       },       {         "number": "7",         "name": "VIN(–)",         "type": "power_in",-        "description": "Differential analog input-; the analog input voltage range is GND - 0.05 V to VCC + 0.05 V."+        "description": "Differential analog input (negative); the analog input voltage must stay within GND - 0.05 V to VCC + 0.05 V."       },       {         "number": "8",         "name": "A GND",         "type": "power_in",-        "description": "Analog ground pin, which should be a single-point analog ground separate from the logic ground points."+        "description": "Analog ground pin, to be used as a single-point analog ground separate from the logic ground points."       },       {         "number": "9",         "name": "VREF/2",         "type": "power_in",-        "description": "Reference voltage input for adjustment to correct full-scale reading; 2.5 V gives 19.53 mV per LSB."+        "description": "Reference voltage input for adjusting the full-scale reading; any VREF/2 bypass capacitors should return to the analog ground point."       },       {         "number": "10",         "name": "D GND",         "type": "power_in",-        "description": "Digital ground pin, to which the power supply bypass capacitor and self-clocking capacitor are returned."+        "description": "Digital ground pin; the power supply bypass capacitor and the self-clocking capacitor should return to digital ground."       },       {         "number": "11",         "name": "DB7",-        "type": "output",-        "description": "Data bit 7 (MSB) Tri-state output."+        "type": "tri_state",+        "description": "Data bit 7 Tri-state digital output of the latched 8-bit conversion result."       },       {         "number": "12",         "name": "DB6",-        "type": "output",-        "description": "Data bit 6 Tri-state output."+        "type": "tri_state",+        "description": "Data bit 6 Tri-state digital output of the latched 8-bit conversion result."       },       {         "number": "13",         "name": "DB5",-        "type": "output",-        "description": "Data bit 5 Tri-state output."+        "type": "tri_state",+        "description": "Data bit 5 Tri-state digital output of the latched 8-bit conversion result."       },       {         "number": "14",         "name": "DB4",-        "type": "output",-        "description": "Data bit 4 Tri-state output."+        "type": "tri_state",+        "description": "Data bit 4 Tri-state digital output of the latched 8-bit conversion result."       },       {         "number": "15",         "name": "DB3",-        "type": "output",-        "description": "Data bit 3 Tri-state output."+        "type": "tri_state",+        "description": "Data bit 3 Tri-state digital output of the latched 8-bit conversion result."       },       {         "number": "16",         "name": "DB2",-        "type": "output",-        "description": "Data bit 2 Tri-state output."+        "type": "tri_state",+        "description": "Data bit 2 Tri-state digital output of the latched 8-bit conversion result."       },       {         "number": "17",         "name": "DB1",-        "type": "output",-        "description": "Data bit 1 Tri-state output."+        "type": "tri_state",+        "description": "Data bit 1 Tri-state digital output of the latched 8-bit conversion result."       },       {         "number": "18",         "name": "DB0 (LSB)",-        "type": "output",-        "description": "Data bit 0 (LSB) Tri-state output."+        "type": "tri_state",+        "description": "Data bit 0, the least significant bit, Tri-state digital output of the latched 8-bit conversion result."       },       {         "number": "19",@@ -166,7 +166,7 @@         "number": "20",         "name": "VCC (or VREF)",         "type": "power_in",-        "description": "+5 V supply voltage (4.5 V to 5.5 V recommended, 6.5 V absolute maximum), also the upper reference input to the ladder."+        "description": "+5 V supply voltage (recommended 4.5 V to 5.5 V), also the upper reference input to the ladder."       }     ],     "provenance": {@@ -174,17 +174,17 @@       "factory_chain": {         "factory": "2.0.0",         "extractor": "extract_pins 0.3",-        "primary_model": "claude-sonnet-5-5",+        "primary_model": "claude-haiku-5-5",         "primary_mode": "text",         "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The datasheet pin table does not label pin 11 as MSB. DB7 is described only as 'Data bit 7', so the "+          "extractor flagged: Pinout taken from the 'NFH and DW Package, 20-Pin PDIP and SOIC' table on page 3. The datasheet cove; The datasheet prints the MPN as ADC0804LCWMX with no /NOPB suffix; the package addendum on page 50 l; The datasheet lists DB7-DB0 as 'O' (output) but describes them as Tri-state output latches; I used K"         ],         "pages_sent": 15,-        "cost_usd": 0.1305,-        "at": "2026-11-12T04:59:21"+        "cost_usd": 0.0749,+        "at": "2026-11-12T08:03:31"       },       "datasheet": {         "url": "https://www.ti.com/lit/ds/symlink/adc0804lcwmx.pdf",@@ -239,7 +239,7 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "14e931e78578bf5f805132569ebbceef2ed4e35445414a4765db3aa4b1ddfc97",+        "sha256": "e5f218e52dbe91f62bbb90f8e3dad6cdb2348568b7a55db0bd61fb08ceb0dfc9",         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }@@ -899,5 +899,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "Texas Instruments Pre-ordered Chips, SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file