← Commit history

Publish 0.1.2

Ray ·c9ba09fbb3 · ·parent 81a9a1c
3 files changed +79−63
README.md+44−28
@@ -2,21 +2,21 @@  **Analog Devices** · Analog To Digital Converters (ADCs) · WLCSP-9(1.3x1.3) -ADAU7112ACBZR7 from Analog Devices, in a WLCSP-9(1.3x1.3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.+ADAU7112ACBZR7 from Analog Devices, in a WLCSP-9(1.3x1.3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---|-| A1 | DVDD | power_in | Internal core digital power supply, specified at 1.10 V to 1.98 V. |+| A1 | DVDD | power_in | Internal core digital power supply, specified from 1.10 V to 1.98 V. | | A2 | GND | power_in | Ground reference for the device. |-| A3 | IOVDD | power_in | Digital I/O power supply, specified at 1.70 V to 3.63 V, supplying the I/O pads and level shifters. |-| B1 | SDATA | tri_state | I2S/TDM serial data output, held in high-impedance tristate except while the port is driving serial data. |-| B2 | CONFIG | input | Configuration pin that selects I2S or one of the TDM slot pairs by being tied to IOVDD, tied to GND, left open, or pulled through a 47 kΩ resistor to IOVDD or GND. |-| B3 | PDM_DAT | input | PDM input data from the digital microphone or PDM source, with channel 0 sampled on the falling PDM_CLK edge and channel 1 on the rising edge. |-| C1 | FSYNC | input | I2S/TDM frame synchronization or left/right clock input, which sets the output sampling rate of 4 kHz to 96 kHz. |-| C2 | BCLK | input | I2S/TDM bit clock input, supporting 64×, 128×, 192×, 256×, 384× or 512× the FSYNC rate. |-| C3 | PDM_CLK | output | PDM output clock generated by the device at 64× the FSYNC rate, ranging from 256 kHz to 6.144 MHz. |+| A3 | IOVDD | power_in | Digital I/O power supply, specified from 1.70 V to 3.63 V. |+| B1 | SDATA | tri_state | I2S/TDM serial data output, which is tristate high impedance except when the port is driving serial data. |+| B2 | CONFIG | input | Configuration pin selecting I2S or TDM slot pair: tie to IOVDD for I2S, tie to GND for slots 1-2, leave open for slots 3-4, tie to IOVDD through 47 kΩ for slots 5-6, or tie to GND through 47 kΩ for slots 7-8. |+| B3 | PDM_DAT | input | PDM data input from the PDM source, latched on both edges of PDM_CLK with 9 ns minimum setup and 3 ns minimum hold. |+| C1 | FSYNC | input | I2S/TDM frame synchronization or left/right clock input, with 10 ns minimum setup and hold to the BCLK rising edge in slave mode. |+| C2 | BCLK | input | I2S/TDM bit clock input in slave mode, with frequency up to 24.576 MHz (tBCLK minimum 40.7 ns). |+| C3 | PDM_CLK | output | PDM output clock to the PDM sources, with frequency from 256 kHz to 6.144 MHz. |  ## Key specifications @@ -33,25 +33,41 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Frequency response (DC to 0.45 × output sampling rate) |  | -0.1 |  | 0.01 | dB | DC to 0.45 × output sampling rate | 3 |-| Digital Core Voltage (DVDD Pin) |  | 1.1 |  | 1.98 | V | Supply for digital circuitry | 3 |-| Input/Output Supply Voltage (IOVDD Pin) |  | 1.7 |  | 3.63 | V | Supply for I/O circuitry, including pads and level shifters | 3 |-| Output Sampling Rate | fS | 4 | 48 | 96 | kHz | FSYNC pulse rate | 3 |-| Bit Clock Frequency | fBCLK | 0.256 | 12.288 | 24.576 | MHz |  | 3 |-| PDM_CLK Frequency | fPDM_CLK | 0.256 | 3.072 | 6.144 | MHz |  | 3 |-| Group Delay |  | 4.47 | 4.47 | 4.47 | FSYNC cycles | 0.02 fS input signal | 3 |-| Gain (PDM to PCM) |  | 0 | 0 | 0 | dB | PDM to PCM | 3 |-| Start-Up Time |  | 63 | 64 | 64 | FSYNC cycles | After power-up reset and initialization code is run | 3 |-| Interchannel Phase |  | 0 | 0 | 0 | Degrees |  | 3 |-| Absolute maximum DVDD to GND |  |  |  | 1.98 | V |  | 6 |-| Absolute maximum IOVDD to GND |  |  |  | 3.63 | V |  | 6 |-| Maximum Operating Ambient Temperature Range |  | -40 |  | 85 | °C |  | 6 |-| Junction Temperature Range |  | -65 |  | 165 | °C |  | 6 |-| Storage Temperature Range |  | -65 |  | 150 | °C |  | 6 |-| Soldering Temperature |  |  |  | 300 | °C | 60 sec | 6 |-| Electrostatic Discharge (ESD) Susceptibility |  |  |  | 4.5 | kV |  | 6 |-| Thermal resistance, junction-to-ambient (package CB-9-8) | θJA |  | 57.1 |  | °C/W | JEDEC 1S0P thermal test board | 6 |-| Thermal resistance, junction-to-case (package CB-9-8) | θJC |  | 0.5 |  | °C/W | JEDEC 2S2P thermal test board with four thermal vias | 6 |+| DVDD supply voltage (digital core) | DVDD | 1.1 |  | 1.98 | V | Supply for digital circuitry (DVDD pin) | 3 |+| IOVDD supply voltage (I/O) | IOVDD | 1.7 |  | 3.63 | V | Supply for I/O circuitry, including pads and level shifters (IOVDD pin) | 3 |+| DVDD to GND | DVDD |  |  | 1.98 | V |  | 6 |+| IOVDD to GND | IOVDD |  |  | 3.63 | V |  | 6 |+| Digital inputs |  | -0.3 |  |  | V | Referenced to DGND; upper limit printed as IOVDD + 0.3 V | 6 |+| Maximum operating ambient temperature range | TA | -40 |  | 85 | °C |  | 6 |+| Junction temperature range | TJ | -65 |  | 165 | °C |  | 6 |+| Storage temperature range | TSTG | -65 |  | 150 | °C |  | 6 |+| Soldering temperature |  |  |  | 300 | °C | 60 sec | 6 |+| High level input voltage (VIH) | VIH | 0.7 |  |  | × IOVDD |  | 3 |+| Low level input voltage (VIL) | VIL |  |  | 0.3 | × IOVDD |  | 3 |+| High level output voltage (VOH) | VOH | 0.85 |  |  | × IOVDD | Source current when output is high (IOH) = 1 mA | 3 |+| Low level output voltage (VOL) | VOL |  |  | 0.1 | × IOVDD | Source current when output is low (IOL) = 1 mA | 3 |+| Frequency response |  | -0.1 |  | 0.01 | dB | DC to 0.45 × output sampling rate | 3 |+| Group delay |  | 4.47 | 4.47 | 4.47 | FSYNC cycles | 0.02 fS input signal | 3 |+| Start-up time |  | 63 | 64 | 64 | FSYNC cycles | After power-up reset and initialization code is run | 3 |+| Gain |  | 0 | 0 | 0 | dB | PDM to PCM | 3 |+| Interchannel phase |  | 0 | 0 | 0 | Degrees |  | 3 |+| Output sampling rate (fS) | fS | 4 | 48 | 96 | kHz | FSYNC pulse rate | 3 |+| Bit clock frequency (fBCLK) | fBCLK | 0.256 | 12.288 | 24.576 | MHz |  | 3 |+| PDM_CLK frequency (fPDM_CLK) | fPDM_CLK | 0.256 | 3.072 | 6.144 | MHz |  | 3 |+| Digital current (DVDD pin) operation state |  |  |  | 0.4 | mA | Over all temperatures, full voltage range, and silicon skews, fS = 48 kHz, I2S format | 4 |+| FSYNC frequency | fFSYNC |  |  | 96 | kHz | 1/tFSYNC, not included in Figure 2 | 4 |+| FSYNC period | tFSYNC | 10.42 |  |  | µs |  | 4 |+| BCLK period | tBCLK | 40.7 |  |  | ns |  | 4 |+| BCLK low pulse width | tBIL | 18 |  |  | ns | Slave mode, BCLK frequency = 24.576 MHz, BCLK period = 40.7 ns | 4 |+| BCLK high pulse width | tBIH | 18 |  |  | ns | Slave mode, BCLK frequency = 24.576 MHz, BCLK period = 40.7 ns | 4 |+| FSYNC setup to BCLK input rising edge | tLIS | 10 |  |  | ns | Slave mode, FSYNC frequency = 96 kHz | 4 |+| FSYNC hold from BCLK input rising edge | tLIH | 10 |  |  | ns | Slave mode, FSYNC frequency = 96 kHz | 4 |+| SDATA delay from BCLK output falling edge | tSOD |  |  | 20.63 | ns | 25 pF load over entire range of IOVDD, all temperatures and skews; IOVDD = 1.7 V to 1.89 V, with 25 pF load | 4 |+| SDATA delay from BCLK output falling edge | tSOD |  |  | 9.03 | ns | IOVDD = 3.3 V ± 10%, with 25 pF load | 4 |+| Data setup time | tSETUP | 9 |  |  | ns | PDM_DAT latched on both edges of PDM_CLK | 5 |+| Data hold time | tHOLD | 3 |  |  | ns | PDM_DAT latched on both edges of PDM_CLK | 5 |+| Junction-to-ambient thermal resistance | θJA |  | 57.1 |  | °C/W | JEDEC 1S0P thermal test board, package CB-9-8 | 6 |+| Junction-to-case thermal resistance | θJC |  | 0.5 |  | °C/W | JEDEC 2S2P thermal test board with four thermal vias, package CB-9-8 | 6 |  ## CAD (KiCad official) 
package.json+16−17
@@ -1,6 +1,6 @@ {   "slug": "adau7112acbzr7",-  "version": "0.1.1",+  "version": "0.1.2",   "type": "component",   "description": "Analog Devices Analog To Digital Converters (ADCs), WLCSP-9(1.3x1.3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -28,8 +28,7 @@     "viewers/symbol.html",     "viewers/footprint.html",     "adau7112acbzr7-hero.glb",-    "adau7112acbzr7-hero.overlay.json",-    "adau7112acbzr7-etched.glb"+    "adau7112acbzr7-hero.overlay.json"   ],   "component": {     "mpn": "ADAU7112ACBZR7",@@ -43,7 +42,7 @@       "symbol": "adau7112acbzr7.kicad_sym",       "footprint": "adau7112acbzr7.kicad_mod",       "model_3d": "adau7112acbzr7-hero.glb",-      "model_3d_plain": "adau7112acbzr7-etched.glb",+      "model_3d_plain": "adau7112acbzr7.glb",       "model_3d_step": "adau7112acbzr7-etched.step",       "model_3d_step_plain": "adau7112acbzr7.step",       "lbr": "adau7112acbzr7.lbr"@@ -54,7 +53,7 @@       "mouser": "584-AU7112ACBZR7"     },     "distributor_check": {-      "checked_at": "2026-11-12T08:00:41Z",+      "checked_at": "2026-11-12T23:39:26Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "505-ADAU7112ACBZR7TR-ND",@@ -70,7 +69,7 @@         "number": "A1",         "name": "DVDD",         "type": "power_in",-        "description": "Internal core digital power supply, specified at 1.10 V to 1.98 V."+        "description": "Internal core digital power supply, specified from 1.10 V to 1.98 V."       },       {         "number": "A2",@@ -82,43 +81,43 @@         "number": "A3",         "name": "IOVDD",         "type": "power_in",-        "description": "Digital I/O power supply, specified at 1.70 V to 3.63 V, supplying the I/O pads and level shifters."+        "description": "Digital I/O power supply, specified from 1.70 V to 3.63 V."       },       {         "number": "B1",         "name": "SDATA",         "type": "tri_state",-        "description": "I2S/TDM serial data output, held in high-impedance tristate except while the port is driving serial data."+        "description": "I2S/TDM serial data output, which is tristate high impedance except when the port is driving serial data."       },       {         "number": "B2",         "name": "CONFIG",         "type": "input",-        "description": "Configuration pin that selects I2S or one of the TDM slot pairs by being tied to IOVDD, tied to GND, left open, or pulled through a 47 kΩ resistor to IOVDD or GND."+        "description": "Configuration pin selecting I2S or TDM slot pair: tie to IOVDD for I2S, tie to GND for slots 1-2, leave open for slots 3-4, tie to IOVDD through 47 kΩ for slots 5-6, or tie to GND through 47 kΩ for slots 7-8."       },       {         "number": "B3",         "name": "PDM_DAT",         "type": "input",-        "description": "PDM input data from the digital microphone or PDM source, with channel 0 sampled on the falling PDM_CLK edge and channel 1 on the rising edge."+        "description": "PDM data input from the PDM source, latched on both edges of PDM_CLK with 9 ns minimum setup and 3 ns minimum hold."       },       {         "number": "C1",         "name": "FSYNC",         "type": "input",-        "description": "I2S/TDM frame synchronization or left/right clock input, which sets the output sampling rate of 4 kHz to 96 kHz."+        "description": "I2S/TDM frame synchronization or left/right clock input, with 10 ns minimum setup and hold to the BCLK rising edge in slave mode."       },       {         "number": "C2",         "name": "BCLK",         "type": "input",-        "description": "I2S/TDM bit clock input, supporting 64×, 128×, 192×, 256×, 384× or 512× the FSYNC rate."+        "description": "I2S/TDM bit clock input in slave mode, with frequency up to 24.576 MHz (tBCLK minimum 40.7 ns)."       },       {         "number": "C3",         "name": "PDM_CLK",         "type": "output",-        "description": "PDM output clock generated by the device at 64× the FSYNC rate, ranging from 256 kHz to 6.144 MHz."+        "description": "PDM output clock to the PDM sources, with frequency from 256 kHz to 6.144 MHz."       }     ],     "provenance": {@@ -132,11 +131,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The datasheet states SDATA is tristate except when driving data but does not label it as a pure outp; The pin table gives only 'Configuration Pin'; the input classification is inferred from Table 9 and ; Timing specs for FSYNC and BCLK are given for slave mode only; classified as inputs based on that, t"+          "extractor flagged: The package hint says WLCSP-9 (1.3 x 1.3); the datasheet gives a 1.26 mm x 1.26 mm body for CB-9-8 a; Pin types for BCLK and FSYNC are inferred as input from the datasheet's slave-mode specifications (t"         ],         "pages_sent": 14,-        "cost_usd": 0.0653,-        "at": "2026-11-12T08:00:26"+        "cost_usd": 0.0644,+        "at": "2026-11-12T23:39:19"       },       "datasheet": {         "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU7112.pdf",@@ -191,7 +190,7 @@         "zmin_mm": -0.007,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "46e4b6a7de387749f94b94dc0bbaf6de525cf29fc90c1e8f373509dd134f797e",+        "sha256": "89cd336e726153d26f727c897b41b49f04d2177ea8d7cf1c7bc67152724e48a9",         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }
page.json+19−18
@@ -4,7 +4,7 @@   "slug": "adau7112acbzr7",   "title": "ADAU7112ACBZR7",   "brief": "Analog Devices Analog To Digital Converters (ADCs), WLCSP-9(1.3x1.3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.1",+  "version": "0.1.2",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -25,7 +25,7 @@       "symbol": "adau7112acbzr7.kicad_sym",       "footprint": "adau7112acbzr7.kicad_mod",       "model_3d": "adau7112acbzr7-hero.glb",-      "model_3d_plain": "adau7112acbzr7-etched.glb",+      "model_3d_plain": "adau7112acbzr7.glb",       "model_3d_step": "adau7112acbzr7-etched.step",       "model_3d_step_plain": "adau7112acbzr7.step",       "lbr": "adau7112acbzr7.lbr"@@ -36,7 +36,7 @@       "mouser": "584-AU7112ACBZR7"     },     "distributor_check": {-      "checked_at": "2026-11-12T08:00:41Z",+      "checked_at": "2026-11-12T23:39:26Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "505-ADAU7112ACBZR7TR-ND",@@ -52,7 +52,7 @@         "number": "A1",         "name": "DVDD",         "type": "power_in",-        "description": "Internal core digital power supply, specified at 1.10 V to 1.98 V."+        "description": "Internal core digital power supply, specified from 1.10 V to 1.98 V."       },       {         "number": "A2",@@ -64,43 +64,43 @@         "number": "A3",         "name": "IOVDD",         "type": "power_in",-        "description": "Digital I/O power supply, specified at 1.70 V to 3.63 V, supplying the I/O pads and level shifters."+        "description": "Digital I/O power supply, specified from 1.70 V to 3.63 V."       },       {         "number": "B1",         "name": "SDATA",         "type": "tri_state",-        "description": "I2S/TDM serial data output, held in high-impedance tristate except while the port is driving serial data."+        "description": "I2S/TDM serial data output, which is tristate high impedance except when the port is driving serial data."       },       {         "number": "B2",         "name": "CONFIG",         "type": "input",-        "description": "Configuration pin that selects I2S or one of the TDM slot pairs by being tied to IOVDD, tied to GND, left open, or pulled through a 47 kΩ resistor to IOVDD or GND."+        "description": "Configuration pin selecting I2S or TDM slot pair: tie to IOVDD for I2S, tie to GND for slots 1-2, leave open for slots 3-4, tie to IOVDD through 47 kΩ for slots 5-6, or tie to GND through 47 kΩ for slots 7-8."       },       {         "number": "B3",         "name": "PDM_DAT",         "type": "input",-        "description": "PDM input data from the digital microphone or PDM source, with channel 0 sampled on the falling PDM_CLK edge and channel 1 on the rising edge."+        "description": "PDM data input from the PDM source, latched on both edges of PDM_CLK with 9 ns minimum setup and 3 ns minimum hold."       },       {         "number": "C1",         "name": "FSYNC",         "type": "input",-        "description": "I2S/TDM frame synchronization or left/right clock input, which sets the output sampling rate of 4 kHz to 96 kHz."+        "description": "I2S/TDM frame synchronization or left/right clock input, with 10 ns minimum setup and hold to the BCLK rising edge in slave mode."       },       {         "number": "C2",         "name": "BCLK",         "type": "input",-        "description": "I2S/TDM bit clock input, supporting 64×, 128×, 192×, 256×, 384× or 512× the FSYNC rate."+        "description": "I2S/TDM bit clock input in slave mode, with frequency up to 24.576 MHz (tBCLK minimum 40.7 ns)."       },       {         "number": "C3",         "name": "PDM_CLK",         "type": "output",-        "description": "PDM output clock generated by the device at 64× the FSYNC rate, ranging from 256 kHz to 6.144 MHz."+        "description": "PDM output clock to the PDM sources, with frequency from 256 kHz to 6.144 MHz."       }     ],     "provenance": {@@ -114,11 +114,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The datasheet states SDATA is tristate except when driving data but does not label it as a pure outp; The pin table gives only 'Configuration Pin'; the input classification is inferred from Table 9 and ; Timing specs for FSYNC and BCLK are given for slave mode only; classified as inputs based on that, t"+          "extractor flagged: The package hint says WLCSP-9 (1.3 x 1.3); the datasheet gives a 1.26 mm x 1.26 mm body for CB-9-8 a; Pin types for BCLK and FSYNC are inferred as input from the datasheet's slave-mode specifications (t"         ],         "pages_sent": 14,-        "cost_usd": 0.0653,-        "at": "2026-11-12T08:00:26"+        "cost_usd": 0.0644,+        "at": "2026-11-12T23:39:19"       },       "datasheet": {         "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU7112.pdf",@@ -173,7 +173,7 @@         "zmin_mm": -0.007,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "46e4b6a7de387749f94b94dc0bbaf6de525cf29fc90c1e8f373509dd134f797e",+        "sha256": "89cd336e726153d26f727c897b41b49f04d2177ea8d7cf1c7bc67152724e48a9",         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }@@ -497,10 +497,11 @@     "viewers/symbol.html",     "viewers/footprint.html",     "adau7112acbzr7-hero.glb",-    "adau7112acbzr7-hero.overlay.json",-    "adau7112acbzr7-etched.glb"+    "adau7112acbzr7-hero.overlay.json"   ],   "visibility": {     "public": true-  }+  },+  "description": "Analog Devices Analog To Digital Converters (ADCs), WLCSP-9(1.3x1.3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file