← Commit history
README.md+27−42
@@ -10,13 +10,13 @@ ADAU7112ACBZR7 from Analog Devices, in a WLCSP-9(1.3x1.3). Pinout and pin descri |---|---|---|---| | A1 | DVDD | power_in | Internal core digital power supply, specified from 1.10 V to 1.98 V. | | A2 | GND | power_in | Ground reference for the device. |-| A3 | IOVDD | power_in | Digital I/O power supply, specified from 1.70 V to 3.63 V. |-| B1 | SDATA | tri_state | I2S/TDM serial data output, which is tristate high impedance except when the port is driving serial data. |-| B2 | CONFIG | input | Configuration pin selecting I2S or TDM slot pair: tie to IOVDD for I2S, tie to GND for slots 1-2, leave open for slots 3-4, tie to IOVDD through 47 kΩ for slots 5-6, or tie to GND through 47 kΩ for slots 7-8. |-| B3 | PDM_DAT | input | PDM data input from the PDM source, latched on both edges of PDM_CLK with 9 ns minimum setup and 3 ns minimum hold. |-| C1 | FSYNC | input | I2S/TDM frame synchronization or left/right clock input, with 10 ns minimum setup and hold to the BCLK rising edge in slave mode. |-| C2 | BCLK | input | I2S/TDM bit clock input in slave mode, with frequency up to 24.576 MHz (tBCLK minimum 40.7 ns). |-| C3 | PDM_CLK | output | PDM output clock to the PDM sources, with frequency from 256 kHz to 6.144 MHz. |+| A3 | IOVDD | power_in | Digital I/O power supply for pads and level shifters, specified from 1.70 V to 3.63 V. |+| B1 | SDATA | output | I2S/TDM serial data output that is tristate high impedance except while the port is driving serial data. |+| B2 | CONFIG | input | Configuration pin that selects I2S format when tied to IOVDD or one of the TDM slot pairs when tied to GND, left open, or tied through a 47 kΩ resistor to IOVDD or GND. |+| B3 | PDM_DAT | input | PDM input data from the PDM sources, with setup time of 9 ns and hold time of 3 ns relative to PDM_CLK. |+| C1 | FSYNC | input | I2S/TDM frame synchronization or left/right clock input, with 96 kHz maximum FSYNC frequency in slave mode. |+| C2 | BCLK | input | I2S/TDM bit clock input, with 24.576 MHz maximum BCLK frequency. |+| C3 | PDM_CLK | output | PDM output clock generated automatically at 64× the FSYNC rate, in the range 256 kHz to 6.144 MHz. |  ## Key specifications @@ -33,41 +33,26 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| DVDD supply voltage (digital core) | DVDD | 1.1 |  | 1.98 | V | Supply for digital circuitry (DVDD pin) | 3 |-| IOVDD supply voltage (I/O) | IOVDD | 1.7 |  | 3.63 | V | Supply for I/O circuitry, including pads and level shifters (IOVDD pin) | 3 |-| DVDD to GND | DVDD |  |  | 1.98 | V |  | 6 |-| IOVDD to GND | IOVDD |  |  | 3.63 | V |  | 6 |-| Digital inputs |  | -0.3 |  |  | V | Referenced to DGND; upper limit printed as IOVDD + 0.3 V | 6 |-| Maximum operating ambient temperature range | TA | -40 |  | 85 | °C |  | 6 |-| Junction temperature range | TJ | -65 |  | 165 | °C |  | 6 |-| Storage temperature range | TSTG | -65 |  | 150 | °C |  | 6 |-| Soldering temperature |  |  |  | 300 | °C | 60 sec | 6 |-| High level input voltage (VIH) | VIH | 0.7 |  |  | × IOVDD |  | 3 |-| Low level input voltage (VIL) | VIL |  |  | 0.3 | × IOVDD |  | 3 |-| High level output voltage (VOH) | VOH | 0.85 |  |  | × IOVDD | Source current when output is high (IOH) = 1 mA | 3 |-| Low level output voltage (VOL) | VOL |  |  | 0.1 | × IOVDD | Source current when output is low (IOL) = 1 mA | 3 |-| Frequency response |  | -0.1 |  | 0.01 | dB | DC to 0.45 × output sampling rate | 3 |-| Group delay |  | 4.47 | 4.47 | 4.47 | FSYNC cycles | 0.02 fS input signal | 3 |-| Start-up time |  | 63 | 64 | 64 | FSYNC cycles | After power-up reset and initialization code is run | 3 |+| Digital Core Voltage (DVDD Pin) |  | 1.1 |  | 1.98 | V | Supply for digital circuitry | 3 |+| Input/Output (I/O) Supply Voltage (IOVDD Pin) |  | 1.7 |  | 3.63 | V | Supply for I/O circuitry, including pads and level shifters | 3 |+| Maximum Operating Ambient Temperature Range | TA | -40 |  | 85 | °C | Commercial temperature range | 1 |+| Output Sampling Rate | fS | 4 | 48 | 96 | kHz | FSYNC pulse rate | 3 |+| Bit Clock Frequency | fBCLK | 0.256 | 12.288 | 24.576 | MHz |  | 3 |+| PDM_CLK Frequency | fPDM_CLK | 0.256 | 3.072 | 6.144 | MHz |  | 3 |+| Frequency Response |  | -0.1 |  | 0.01 | dB | DC to 0.45 × output sampling rate | 3 | | Gain |  | 0 | 0 | 0 | dB | PDM to PCM | 3 |-| Interchannel phase |  | 0 | 0 | 0 | Degrees |  | 3 |-| Output sampling rate (fS) | fS | 4 | 48 | 96 | kHz | FSYNC pulse rate | 3 |-| Bit clock frequency (fBCLK) | fBCLK | 0.256 | 12.288 | 24.576 | MHz |  | 3 |-| PDM_CLK frequency (fPDM_CLK) | fPDM_CLK | 0.256 | 3.072 | 6.144 | MHz |  | 3 |-| Digital current (DVDD pin) operation state |  |  |  | 0.4 | mA | Over all temperatures, full voltage range, and silicon skews, fS = 48 kHz, I2S format | 4 |-| FSYNC frequency | fFSYNC |  |  | 96 | kHz | 1/tFSYNC, not included in Figure 2 | 4 |-| FSYNC period | tFSYNC | 10.42 |  |  | µs |  | 4 |-| BCLK period | tBCLK | 40.7 |  |  | ns |  | 4 |-| BCLK low pulse width | tBIL | 18 |  |  | ns | Slave mode, BCLK frequency = 24.576 MHz, BCLK period = 40.7 ns | 4 |-| BCLK high pulse width | tBIH | 18 |  |  | ns | Slave mode, BCLK frequency = 24.576 MHz, BCLK period = 40.7 ns | 4 |-| FSYNC setup to BCLK input rising edge | tLIS | 10 |  |  | ns | Slave mode, FSYNC frequency = 96 kHz | 4 |-| FSYNC hold from BCLK input rising edge | tLIH | 10 |  |  | ns | Slave mode, FSYNC frequency = 96 kHz | 4 |-| SDATA delay from BCLK output falling edge | tSOD |  |  | 20.63 | ns | 25 pF load over entire range of IOVDD, all temperatures and skews; IOVDD = 1.7 V to 1.89 V, with 25 pF load | 4 |-| SDATA delay from BCLK output falling edge | tSOD |  |  | 9.03 | ns | IOVDD = 3.3 V ± 10%, with 25 pF load | 4 |-| Data setup time | tSETUP | 9 |  |  | ns | PDM_DAT latched on both edges of PDM_CLK | 5 |-| Data hold time | tHOLD | 3 |  |  | ns | PDM_DAT latched on both edges of PDM_CLK | 5 |-| Junction-to-ambient thermal resistance | θJA |  | 57.1 |  | °C/W | JEDEC 1S0P thermal test board, package CB-9-8 | 6 |-| Junction-to-case thermal resistance | θJC |  | 0.5 |  | °C/W | JEDEC 2S2P thermal test board with four thermal vias, package CB-9-8 | 6 |+| Group Delay |  | 4.47 | 4.47 | 4.47 | FSYNC cycles | 0.02 fS input signal | 3 |+| Start-Up Time |  | 63 | 64 | 64 | FSYNC cycles | After power-up reset and initialization code is run | 3 |+| Interchannel Phase |  | 0 | 0 | 0 | Degrees |  | 3 |+| DVDD to GND |  |  |  | 1.98 | V |  | 6 |+| IOVDD to GND |  |  |  | 3.63 | V |  | 6 |+| Maximum Operating Ambient Temperature Range |  | -40 |  | 85 | °C |  | 6 |+| Junction Temperature Range |  | -65 |  | 165 | °C |  | 6 |+| Storage Temperature Range |  | -65 |  | 150 | °C |  | 6 |+| Soldering Temperature |  |  |  | 300 | °C | 60 sec | 6 |+| Electrostatic Discharge (ESD) Susceptibility |  |  |  | 4.5 | kV |  | 6 |+| Thermal Resistance, junction-to-ambient | θJA |  | 57.1 |  | °C/W | JEDEC 1S0P thermal test board, JESD-51 (simulated), package CB-9-8 | 6 |+| Thermal Resistance, junction-to-case | θJC |  | 0.5 |  | °C/W | JEDEC 2S2P thermal test board with four thermal vias, JESD-51 (simulated), package CB-9-8 | 6 |  ## CAD (KiCad official) @@ -80,7 +65,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU7112.pdf) (14 pp, sha256 `2039bf3b48974218`, retrieved 2026-11-12, tier: manufacturer)+- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU7112.pdf) (14 pp, sha256 `2039bf3b48974218`, retrieved 2026-11-17, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
adau7112acbzr7-hero.glb
⋯ 1 unchanged line ⋯
adau7112acbzr7-hero.overlay.json+278−283
@@ -1,287 +1,282 @@ {- "spec": "adom-hero 1.4",- "mpn": "ADAU7112ACBZR7",- "kind": "component + footprint reference art",- "board_use": false,- "plane_z_mm": -0.02,- "units": "metre",- "upAxis": "Z",- "layers": {-  "pad_outlines": {-   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-   "rgba": [-    0.0,-    0.902,-    0.863,-    0.5-   ],-   "pads": 9,-   "span_mm": 1.0,-   "dash_mm": 0.12,-   "gap_mm": 0.072,-   "pad_stroke_mm": 0.03+  "spec": "adom-hero 1.4",+  "mpn": "ADAU7112ACBZR7",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 9,+      "span_mm": 1.0,+      "dash_mm": 0.12,+      "gap_mm": 0.072,+      "pad_stroke_mm": 0.03+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 5,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "A1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 9,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }   },-  "silkscreen": {-   "material": "Silkscreen reference lines - 30 percent opacity",-   "rgba": [-    0.92,-    0.96,-    1.0,-    0.3-   ],-   "footprint_items": 5,-   "pin1": {-    "source": "footprint silkscreen",-    "pad": "A1"-   }+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.25,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -0.519,+      0.519,+      -0.52,+      0.52+    ],+    "pads_bbox_mm": [+      -0.5,+      0.5,+      -0.5,+      0.5+    ],+    "seating_z_mm": -0.007   },-  "signal_names": {-   "material": "Signal names - 50 percent opacity",-   "rgba": [-    0.92,-    0.96,-    1.0,-    0.5-   ],-   "font": "DejaVu Sans Mono",-   "labels": 9,-   "sides": "top + mirrored underside (single-sided)",-   "omitted": null,-   "fallback_to_pad_number": 0-  }- },- "align": {-  "ok": true,-  "board_underside": true,-  "electrical_pads_without_contact": [],-  "mounting_pads_left_out": [],-  "centre_offset_mm": 0.0,-  "over_pads": true,-  "tolerance_mm": 0.25,-  "orientation_flipped": false,-  "contacts_bbox_mm": [-   -0.519,-   0.519,-   -0.52,-   0.52-  ],-  "pads_bbox_mm": [-   -0.5,-   0.5,-   -0.5,-   0.5-  ],-  "seating_z_mm": -0.007- },- "sources": {-  "glb": "adau7112acbzr7-etched.glb",-  "glb_sha256": "63422315459393cfc057554f44a156caf73d5066acb6cad6b0ab666a36442953",-  "footprint": "adau7112acbzr7.kicad_mod",-  "footprint_sha256": "c17b99276873980c2058ef36c9bbee0f4bd4f646fd86821472644d44bd6d9a33",-  "pins": "page.json component.pins",-  "pins_sha256": "738359838f5e9472eeed7647b2929e23dd3b4b4f7763f16cb5cc5dee2248b7cd"- },- "generator": "factory/hero_glb.py",- "labels": [-  {-   "pad": "A1",-   "text": "DVDD",-   "x": -0.92,-   "y": -0.4,-   "align": "right",-   "vertical": false,-   "h": 0.2-  },-  {-   "pad": "A2",-   "text": "GND",-   "x": 0.0,-   "y": -0.92,-   "align": "left",-   "vertical": true,-   "h": 0.2-  },-  {-   "pad": "A3",-   "text": "IOVDD",-   "x": 0.92,-   "y": -0.4,-   "align": "left",-   "vertical": false,-   "h": 0.2-  },-  {-   "pad": "B1",-   "text": "SDATA",-   "x": -0.92,-   "y": 0.0,-   "align": "right",-   "vertical": false,-   "h": 0.2-  },-  {-   "pad": "B2",-   "text": "CONFIG",-   "x": 0.92,-   "y": 0.0,-   "align": "left",-   "vertical": false,-   "h": 0.2-  },-  {-   "pad": "B3",-   "text": "PDM_DAT",-   "x": 0.92,-   "y": 0.0,-   "align": "left",-   "vertical": false,-   "h": 0.2-  },-  {-   "pad": "C1",-   "text": "FSYNC",-   "x": -0.92,-   "y": 0.4,-   "align": "right",-   "vertical": false,-   "h": 0.2-  },-  {-   "pad": "C2",-   "text": "BCLK",-   "x": 0.0,-   "y": 0.92,-   "align": "right",-   "vertical": true,-   "h": 0.2+  "sources": {+    "glb": "adau7112acbzr7-etched.glb",+    "glb_sha256": "63422315459393cfc057554f44a156caf73d5066acb6cad6b0ab666a36442953",+    "footprint": "adau7112acbzr7.kicad_mod",+    "footprint_sha256": "e7bba8957155fd26edd136920ab4527989cdfbd044aa7b3e67701e0010ef8b23",+    "pins": "page.json component.pins",+    "pins_sha256": "738359838f5e9472eeed7647b2929e23dd3b4b4f7763f16cb5cc5dee2248b7cd"   },-  {-   "pad": "C3",-   "text": "PDM_CLK",-   "x": 0.92,-   "y": 0.4,-   "align": "left",-   "vertical": false,-   "h": 0.2-  }- ],- "pads": [-  {-   "number": "A1",-   "shape": "circle",-   "center_mm": [-    -0.4,-    -0.4-   ],-   "size_mm": [-    0.2,-    0.2-   ],-   "rot": 0.0-  },-  {-   "number": "A2",-   "shape": "circle",-   "center_mm": [-    0.0,-    -0.4-   ],-   "size_mm": [-    0.2,-    0.2-   ],-   "rot": 0.0-  },-  {-   "number": "A3",-   "shape": "circle",-   "center_mm": [-    0.4,-    -0.4-   ],-   "size_mm": [-    0.2,-    0.2-   ],-   "rot": 0.0-  },-  {-   "number": "B1",-   "shape": "circle",-   "center_mm": [-    -0.4,-    0.0-   ],-   "size_mm": [-    0.2,-    0.2-   ],-   "rot": 0.0-  },-  {-   "number": "B2",-   "shape": "circle",-   "center_mm": [-    0.0,-    0.0-   ],-   "size_mm": [-    0.2,-    0.2-   ],-   "rot": 0.0-  },-  {-   "number": "B3",-   "shape": "circle",-   "center_mm": [-    0.4,-    0.0-   ],-   "size_mm": [-    0.2,-    0.2-   ],-   "rot": 0.0-  },-  {-   "number": "C1",-   "shape": "circle",-   "center_mm": [-    -0.4,-    0.4-   ],-   "size_mm": [-    0.2,-    0.2-   ],-   "rot": 0.0-  },-  {-   "number": "C2",-   "shape": "circle",-   "center_mm": [-    0.0,-    0.4-   ],-   "size_mm": [-    0.2,-    0.2-   ],-   "rot": 0.0-  },-  {-   "number": "C3",-   "shape": "circle",-   "center_mm": [-    0.4,-    0.4-   ],-   "size_mm": [-    0.2,-    0.2-   ],-   "rot": 0.0-  }- ]-}\ No newline at end of file+  "generator": "adom-wiki 1.8.25 (component_hero)",+  "labels": [+    {+      "pad": "A1",+      "text": "DVDD",+      "x": -0.92,+      "y": -0.4,+      "align": "right",+      "vertical": false,+      "h": 0.2+    },+    {+      "pad": "A2",+      "text": "GND",+      "x": 0.0,+      "y": -0.92,+      "align": "left",+      "vertical": true,+      "h": 0.2+    },+    {+      "pad": "A3",+      "text": "IOVDD",+      "x": 0.92,+      "y": -0.4,+      "align": "left",+      "vertical": false,+      "h": 0.2+    },+    {+      "pad": "B1",+      "text": "SDATA",+      "x": -0.92,+      "y": 0.0,+      "align": "right",+      "vertical": false,+      "h": 0.2+    },+    {+      "pad": "B2",+      "text": "CONFIG",+      "x": 0.92,+      "y": 0.0,+      "align": "left",+      "vertical": false,+      "h": 0.2+    },+    {+      "pad": "B3",+      "text": "PDM_DAT",+      "x": 0.92,+      "y": 0.0,+      "align": "left",+      "vertical": false,+      "h": 0.2+    },+    {+      "pad": "C1",+      "text": "FSYNC",+      "x": -0.92,+      "y": 0.4,+      "align": "right",+      "vertical": false,+      "h": 0.2+    },+    {+      "pad": "C2",+      "text": "BCLK",+      "x": 0.0,+      "y": 0.92,+      "align": "right",+      "vertical": true,+      "h": 0.2+    },+    {+      "pad": "C3",+      "text": "PDM_CLK",+      "x": 0.92,+      "y": 0.4,+      "align": "left",+      "vertical": false,+      "h": 0.2+    }+  ],+  "pads": [+    {+      "number": "A1",+      "shape": "circle",+      "center_mm": [+        -0.4,+        -0.4+      ],+      "size_mm": [+        0.2,+        0.2+      ],+      "rot": 0.0+    },+    {+      "number": "A2",+      "shape": "circle",+      "center_mm": [+        0.0,+        -0.4+      ],+      "size_mm": [+        0.2,+        0.2+      ],+      "rot": 0.0+    },+    {+      "number": "A3",+      "shape": "circle",+      "center_mm": [+        0.4,+        -0.4+      ],+      "size_mm": [+        0.2,+        0.2+      ],+      "rot": 0.0+    },+    {+      "number": "B1",+      "shape": "circle",+      "center_mm": [+        -0.4,+        0.0+      ],+      "size_mm": [+        0.2,+        0.2+      ],+      "rot": 0.0+    },+    {+      "number": "B2",+      "shape": "circle",+      "center_mm": [+        0.0,+        0.0+      ],+      "size_mm": [+        0.2,+        0.2+      ],+      "rot": 0.0+    },+    {+      "number": "B3",+      "shape": "circle",+      "center_mm": [+        0.4,+        0.0+      ],+      "size_mm": [+        0.2,+        0.2+      ],+      "rot": 0.0+    },+    {+      "number": "C1",+      "shape": "circle",+      "center_mm": [+        -0.4,+        0.4+      ],+      "size_mm": [+        0.2,+        0.2+      ],+      "rot": 0.0+    },+    {+      "number": "C2",+      "shape": "circle",+      "center_mm": [+        0.0,+        0.4+      ],+      "size_mm": [+        0.2,+        0.2+      ],+      "rot": 0.0+    },+    {+      "number": "C3",+      "shape": "circle",+      "center_mm": [+        0.4,+        0.4+      ],+      "size_mm": [+        0.2,+        0.2+      ],+      "rot": 0.0+    }+  ]+}
adau7112acbzr7.kicad_mod+10−6
@@ -86,6 +86,16 @@ 		(fill yes) 		(layer "F.SilkS") 	)+	(fp_rect+		(start -1.61 -1.61)+		(end 1.61 1.61)+		(stroke+			(width 0.05)+			(type solid)+		)+		(fill no)+		(layer "F.CrtYd")+	) 	(fp_line 		(start -0.605 -0.3075) 		(end -0.3025 -0.61)@@ -207,10 +217,4 @@ 			(xyz 0 0 0) 		) 	)-	(fp_poly-		(pts (xy -0.86 -0.86) (xy 0.86 -0.86) (xy 0.86 0.86) (xy -0.86 0.86))-		(stroke (width 0.05) (type solid))-		(fill no)-		(layer "F.CrtYd")-	) )
adau7112acbzr7.kicad_sym+1−1
@@ -20,7 +20,7 @@       (name "IOVDD" (effects (font (size 1.27 1.27))))       (number "A3" (effects (font (size 1.27 1.27))))     )-    (pin tri_state line (at -17.78 -2.54 0) (length 5.08)+    (pin output line (at -17.78 -2.54 0) (length 5.08)       (name "SDATA" (effects (font (size 1.27 1.27))))       (number "B1" (effects (font (size 1.27 1.27))))     )
adau7112acbzr7.lbr+1−1
@@ -93,7 +93,7 @@   <pin name="DVDD" x="-17.78" y="5.08" length="middle" direction="pwr"/>   <pin name="GND" x="-17.78" y="2.54" length="middle" direction="pwr"/>   <pin name="IOVDD" x="-17.78" y="0" length="middle" direction="pwr"/>-  <pin name="SDATA" x="-17.78" y="-2.54" length="middle" direction="hiz"/>+  <pin name="SDATA" x="-17.78" y="-2.54" length="middle" direction="out"/>   <pin name="CONFIG" x="-17.78" y="-5.08" length="middle" direction="in"/>   <pin name="PDM_CLK" x="17.78" y="2.54" length="middle" direction="out" rot="R180"/>   <pin name="BCLK" x="17.78" y="0" length="middle" direction="in" rot="R180"/>
package.json+16−16
@@ -1,6 +1,6 @@ {   "slug": "adau7112acbzr7",-  "version": "0.1.2",+  "version": "0.1.3",   "type": "component",   "description": "Analog Devices Analog To Digital Converters (ADCs), WLCSP-9(1.3x1.3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -53,7 +53,7 @@       "mouser": "584-AU7112ACBZR7"     },     "distributor_check": {-      "checked_at": "2026-11-12T23:39:26Z",+      "checked_at": "2026-11-17T17:29:25Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "505-ADAU7112ACBZR7TR-ND",@@ -81,43 +81,43 @@         "number": "A3",         "name": "IOVDD",         "type": "power_in",-        "description": "Digital I/O power supply, specified from 1.70 V to 3.63 V."+        "description": "Digital I/O power supply for pads and level shifters, specified from 1.70 V to 3.63 V."       },       {         "number": "B1",         "name": "SDATA",-        "type": "tri_state",-        "description": "I2S/TDM serial data output, which is tristate high impedance except when the port is driving serial data."+        "type": "output",+        "description": "I2S/TDM serial data output that is tristate high impedance except while the port is driving serial data."       },       {         "number": "B2",         "name": "CONFIG",         "type": "input",-        "description": "Configuration pin selecting I2S or TDM slot pair: tie to IOVDD for I2S, tie to GND for slots 1-2, leave open for slots 3-4, tie to IOVDD through 47 kΩ for slots 5-6, or tie to GND through 47 kΩ for slots 7-8."+        "description": "Configuration pin that selects I2S format when tied to IOVDD or one of the TDM slot pairs when tied to GND, left open, or tied through a 47 kΩ resistor to IOVDD or GND."       },       {         "number": "B3",         "name": "PDM_DAT",         "type": "input",-        "description": "PDM data input from the PDM source, latched on both edges of PDM_CLK with 9 ns minimum setup and 3 ns minimum hold."+        "description": "PDM input data from the PDM sources, with setup time of 9 ns and hold time of 3 ns relative to PDM_CLK."       },       {         "number": "C1",         "name": "FSYNC",         "type": "input",-        "description": "I2S/TDM frame synchronization or left/right clock input, with 10 ns minimum setup and hold to the BCLK rising edge in slave mode."+        "description": "I2S/TDM frame synchronization or left/right clock input, with 96 kHz maximum FSYNC frequency in slave mode."       },       {         "number": "C2",         "name": "BCLK",         "type": "input",-        "description": "I2S/TDM bit clock input in slave mode, with frequency up to 24.576 MHz (tBCLK minimum 40.7 ns)."+        "description": "I2S/TDM bit clock input, with 24.576 MHz maximum BCLK frequency."       },       {         "number": "C3",         "name": "PDM_CLK",         "type": "output",-        "description": "PDM output clock to the PDM sources, with frequency from 256 kHz to 6.144 MHz."+        "description": "PDM output clock generated automatically at 64× the FSYNC rate, in the range 256 kHz to 6.144 MHz."       }     ],     "provenance": {@@ -131,11 +131,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The package hint says WLCSP-9 (1.3 x 1.3); the datasheet gives a 1.26 mm x 1.26 mm body for CB-9-8 a; Pin types for BCLK and FSYNC are inferred as input from the datasheet's slave-mode specifications (t"+          "extractor flagged: The MPN ADAU7112ACBZR7 is the 7-inch tape and reel version of the 9-ball WLCSP (package option CB-9-; SDATA is typed as output although the datasheet states it is tristate when not driving serial data; ; Pin descriptions draw some limits from other datasheet sections (DVDD and IOVDD ranges from page 3, "         ],         "pages_sent": 14,-        "cost_usd": 0.0644,-        "at": "2026-11-12T23:39:19"+        "cost_usd": 0.0653,+        "at": "2026-11-17T17:29:08"       },       "datasheet": {         "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU7112.pdf",@@ -172,7 +172,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "2761b77e9764240fbf79c91412b2bd127e1a30cb1a2103ceae4ce4c1a86308df",-        "checked": "2026-11-12",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -190,8 +190,8 @@         "zmin_mm": -0.007,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "89cd336e726153d26f727c897b41b49f04d2177ea8d7cf1c7bc67152724e48a9",-        "checked": "2026-11-12",+        "sha256": "dd422282cabf0a3c3a44bbe7626b09e191b09a3fe1d717c2491621fa1e2e96d5",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],
page.json+19−17
@@ -4,7 +4,7 @@   "slug": "adau7112acbzr7",   "title": "ADAU7112ACBZR7",   "brief": "Analog Devices Analog To Digital Converters (ADCs), WLCSP-9(1.3x1.3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.2",+  "version": "0.1.3",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -36,7 +36,7 @@       "mouser": "584-AU7112ACBZR7"     },     "distributor_check": {-      "checked_at": "2026-11-12T23:39:26Z",+      "checked_at": "2026-11-17T17:29:25Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "505-ADAU7112ACBZR7TR-ND",@@ -64,43 +64,43 @@         "number": "A3",         "name": "IOVDD",         "type": "power_in",-        "description": "Digital I/O power supply, specified from 1.70 V to 3.63 V."+        "description": "Digital I/O power supply for pads and level shifters, specified from 1.70 V to 3.63 V."       },       {         "number": "B1",         "name": "SDATA",-        "type": "tri_state",-        "description": "I2S/TDM serial data output, which is tristate high impedance except when the port is driving serial data."+        "type": "output",+        "description": "I2S/TDM serial data output that is tristate high impedance except while the port is driving serial data."       },       {         "number": "B2",         "name": "CONFIG",         "type": "input",-        "description": "Configuration pin selecting I2S or TDM slot pair: tie to IOVDD for I2S, tie to GND for slots 1-2, leave open for slots 3-4, tie to IOVDD through 47 kΩ for slots 5-6, or tie to GND through 47 kΩ for slots 7-8."+        "description": "Configuration pin that selects I2S format when tied to IOVDD or one of the TDM slot pairs when tied to GND, left open, or tied through a 47 kΩ resistor to IOVDD or GND."       },       {         "number": "B3",         "name": "PDM_DAT",         "type": "input",-        "description": "PDM data input from the PDM source, latched on both edges of PDM_CLK with 9 ns minimum setup and 3 ns minimum hold."+        "description": "PDM input data from the PDM sources, with setup time of 9 ns and hold time of 3 ns relative to PDM_CLK."       },       {         "number": "C1",         "name": "FSYNC",         "type": "input",-        "description": "I2S/TDM frame synchronization or left/right clock input, with 10 ns minimum setup and hold to the BCLK rising edge in slave mode."+        "description": "I2S/TDM frame synchronization or left/right clock input, with 96 kHz maximum FSYNC frequency in slave mode."       },       {         "number": "C2",         "name": "BCLK",         "type": "input",-        "description": "I2S/TDM bit clock input in slave mode, with frequency up to 24.576 MHz (tBCLK minimum 40.7 ns)."+        "description": "I2S/TDM bit clock input, with 24.576 MHz maximum BCLK frequency."       },       {         "number": "C3",         "name": "PDM_CLK",         "type": "output",-        "description": "PDM output clock to the PDM sources, with frequency from 256 kHz to 6.144 MHz."+        "description": "PDM output clock generated automatically at 64× the FSYNC rate, in the range 256 kHz to 6.144 MHz."       }     ],     "provenance": {@@ -114,11 +114,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The package hint says WLCSP-9 (1.3 x 1.3); the datasheet gives a 1.26 mm x 1.26 mm body for CB-9-8 a; Pin types for BCLK and FSYNC are inferred as input from the datasheet's slave-mode specifications (t"+          "extractor flagged: The MPN ADAU7112ACBZR7 is the 7-inch tape and reel version of the 9-ball WLCSP (package option CB-9-; SDATA is typed as output although the datasheet states it is tristate when not driving serial data; ; Pin descriptions draw some limits from other datasheet sections (DVDD and IOVDD ranges from page 3, "         ],         "pages_sent": 14,-        "cost_usd": 0.0644,-        "at": "2026-11-12T23:39:19"+        "cost_usd": 0.0653,+        "at": "2026-11-17T17:29:08"       },       "datasheet": {         "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU7112.pdf",@@ -155,7 +155,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "2761b77e9764240fbf79c91412b2bd127e1a30cb1a2103ceae4ce4c1a86308df",-        "checked": "2026-11-12",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -173,8 +173,8 @@         "zmin_mm": -0.007,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "89cd336e726153d26f727c897b41b49f04d2177ea8d7cf1c7bc67152724e48a9",-        "checked": "2026-11-12",+        "sha256": "dd422282cabf0a3c3a44bbe7626b09e191b09a3fe1d717c2491621fa1e2e96d5",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],@@ -693,5 +693,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "Analog Devices Analog To Digital Converters (ADCs), WLCSP-9(1.3x1.3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file