ADAU1701JSTZ

@@ -59,19 +59,19 @@         "number": "2",         "name": "ADC0",         "type": "input",-        "description": "Analog Audio Input 0 with full-scale input current of 100 \u03bcA rms (2 V rms with 18 k\u03a9 external resistor)."+        "description": "Analog Audio Input 0 with full-scale input current of 100 μA rms (2 V rms with 18 kΩ external resistor)."       },       {         "number": "3",         "name": "ADC_RES",         "type": "input",-        "description": "ADC Reference Current input; set full-scale current with external 18 k\u03a9 resistor connected between this pin and ground."+        "description": "ADC Reference Current input; set full-scale current with external 18 kΩ resistor connected between this pin and ground."       },       {         "number": "4",         "name": "ADC1",         "type": "input",-        "description": "Analog Audio Input 1 with full-scale input current of 100 \u03bcA rms (2 V rms with 18 k\u03a9 external resistor)."+        "description": "Analog Audio Input 1 with full-scale input current of 100 μA rms (2 V rms with 18 kΩ external resistor)."       },       {         "number": "5",@@ -179,7 +179,7 @@         "number": "22",         "name": "SDA/COUT",         "type": "bidirectional",-        "description": "Multifunction I2C Data / SPI Data Output pin; open-collector I2C with 2.2 k\u03a9 pull-up or tri-stated SPI output."+        "description": "Multifunction I2C Data / SPI Data Output pin; open-collector I2C with 2.2 kΩ pull-up or tri-stated SPI output."       },       {         "number": "23",@@ -233,13 +233,13 @@         "number": "31",         "name": "OSCO",         "type": "output",-        "description": "Crystal Oscillator Circuit Output with 100 \u03a9 damping resistor connection; do not use directly to drive clock to other ICs."+        "description": "Crystal Oscillator Circuit Output with 100 Ω damping resistor connection; do not use directly to drive clock to other ICs."       },       {         "number": "32",         "name": "MCLKI",         "type": "input",-        "description": "Master Clock Input; connect to 3.3 V clock signal or crystal oscillator output (3 \u03bcA input leakage)."+        "description": "Master Clock Input; connect to 3.3 V clock signal or crystal oscillator output (3 μA input leakage)."       },       {         "number": "33",@@ -257,7 +257,7 @@         "number": "35",         "name": "PLL_LF",         "type": "output",-        "description": "PLL Loop Filter analog output; connect two capacitors (3.3 nF and 56 nF) and one 475 \u03a9 resistor to this pin."+        "description": "PLL Loop Filter analog output; connect two capacitors (3.3 nF and 56 nF) and one 475 Ω resistor to this pin."       },       {         "number": "36",@@ -275,25 +275,25 @@         "number": "38",         "name": "PLL_MODE0",         "type": "input",-        "description": "PLL Mode Setting bit 0; sets master clock PLL output frequency (64\u00d7fS, 256\u00d7fS, 384\u00d7fS, or 512\u00d7fS)."+        "description": "PLL Mode Setting bit 0; sets master clock PLL output frequency (64×fS, 256×fS, 384×fS, or 512×fS)."       },       {         "number": "39",         "name": "PLL_MODE1",         "type": "input",-        "description": "PLL Mode Setting bit 1; sets master clock PLL output frequency (64\u00d7fS, 256\u00d7fS, 384\u00d7fS, or 512\u00d7fS)."+        "description": "PLL Mode Setting bit 1; sets master clock PLL output frequency (64×fS, 256×fS, 384×fS, or 512×fS)."       },       {         "number": "40",         "name": "CM",         "type": "output",-        "description": "1.5 V Common-Mode Reference analog output; connect 47 \u03bcF decoupling capacitor to ground to reduce ADC-DAC crosstalk."+        "description": "1.5 V Common-Mode Reference analog output; connect 47 μF decoupling capacitor to ground to reduce ADC-DAC crosstalk."       },       {         "number": "41",         "name": "FILTD",         "type": "output",-        "description": "DAC Filter Decoupling analog output (1.5 V); connect 10 \u03bcF capacitor between this pin and ground."+        "description": "DAC Filter Decoupling analog output (1.5 V); connect 10 μF capacitor between this pin and ground."       },       {         "number": "42",@@ -329,7 +329,7 @@         "number": "47",         "name": "FILTA",         "type": "output",-        "description": "ADC Filter Decoupling analog output (1.5 V); connect 10 \u03bcF capacitor between this pin and ground."+        "description": "ADC Filter Decoupling analog output (1.5 V); connect 10 μF capacitor between this pin and ground."       },       {         "number": "48",@@ -372,6 +372,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "adau1701jstz.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          9.0,+          9.0,+          1.5+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "9dea352d93177c2904afd7d7b68ea8855ce1ab691f69f8b3e13655600514b6bf",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "adau1701jstz-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          9.0,+          9.0,+          1.5+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "089582c9b299ff9a634084ea579253792bdbc4c2643e620d5730281906e228da",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}