component
ADA4922-1ARDZ
Public Made by Adomby adom
Analog Devices Differential OpAmps, SOIC-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 3d ago |
| viewers | 3d ago |
| ada4922-1ardz-etched.glb | 3d ago |
| ada4922-1ardz-etched.step | 3d ago |
| ada4922-1ardz-hero.glb | 3d ago |
| ada4922-1ardz-hero.overlay.json | 3d ago |
| ada4922-1ardz.glb | 3d ago |
| ada4922-1ardz.kicad_mod | 3d ago |
| ada4922-1ardz.kicad_sym | 3d ago |
| ada4922-1ardz.lbr | 3d ago |
| ada4922-1ardz.step | 3d ago |
| package.json | 3d ago |
| page.json | 3d ago |
| README.md | 3d ago |
| verification.json | 3d ago |
ADA4922-1ARDZ
Analog Devices · Differential OpAmps · SOIC-8-EP
ADA4922-1ARDZ from Analog Devices, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NIC | unconnected | No internal connection. |
| 2 | REF | input | Reference voltage for the single-ended input signal; it sets the output baseline of the inverting path (OUT−) and is normally tied to the input signal midswing level (often midsupply, or ground for bipolar signals and supplies). |
| 3 | VS+ | power_in | Positive power supply; total supply operating range is 5 V to 26 V, with broadband decoupling placed as close as possible to the pin. |
| 4 | OUT+ | output | Noninverting side of the differential output, which follows the input voltage (VOUT+ = VIN) and can swing ±10.7 V typical on ±12 V supplies. |
| 5 | OUT− | output | Inverting side of the differential output (VOUT− = −VIN + 2(REF)), which can swing ±10.7 V typical on ±12 V supplies. |
| 6 | VS− | power_in | Negative power supply; total supply operating range is 5 V to 26 V, with broadband decoupling placed as close as possible to the pin. |
| 7 | DIS | input | Disable input, active low; on ±12 V supplies disabled at ≤ −11 V and enabled at ≥ −9 V, and the outputs are not placed in a high-impedance state when disabled. |
| 8 | IN | input | Single-ended signal input with 11 MΩ input resistance and an input voltage range of ±10.7 V on ±12 V supplies. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-8-EP |
| Category | Amplifiers |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| -3 dB Bandwidth (small signal) | 34 | 38 | MHz | VS=±12 V, G=+2, VO=0.2 V p-p, differential | 3 | ||
| -3 dB Bandwidth (large signal) | 6.5 | 7.2 | MHz | VS=±12 V, G=+2, VO=40 V p-p, differential | 3 | ||
| Differential Output Offset Voltage | 0.35 | 1.1 | mV | VS=±12 V | 3 | ||
| Input Bias Current | 1.8 | 3.5 | µA | VS=±12 V | 3 | ||
| Output Voltage Swing | 10.65 | 10.7 | V | VS=±12 V, each single-ended output, RL = 1 kΩ, printed ± | 3 | ||
| Operating Range (Supply) | 5 | 26 | V | VS=±12 V table | 3 | ||
| Quiescent Current | 9.4 | 10.1 | mA | VS=±12 V | 3 | ||
| Quiescent Current (Disabled) | 1.5 | 2 | mA | VS=±12 V | 3 | ||
| -PSRR | -89 | -80 | dB | VS=±12 V | 3 | ||
| +PSRR | -91 | -83 | dB | VS=±12 V | 3 | ||
| DIS Input Voltage Threshold (Disabled) | -11 | V | VS=±12 V, Disabled ≤ −11 V | 3 | |||
| DIS Input Voltage Threshold (Enabled) | -9 | V | VS=±12 V, Enabled ≥ −9 V | 3 | |||
| -3 dB Bandwidth (small signal) | 36 | 40.5 | MHz | VS=±5 V, G=+2, VO=0.2 V p-p, differential | 4 | ||
| -3 dB Bandwidth (large signal) | 6.5 | 13.5 | MHz | VS=±5 V, G=+2, VO=12 V p-p, differential | 4 | ||
| Differential Output Offset Voltage | 0.4 | 1.2 | mV | VS=±5 V | 4 | ||
| Input Bias Current | 2 | 3.5 | µA | VS=±5 V | 4 | ||
| Output Voltage Swing | 3.55 | 3.6 | V | VS=±5 V, each single-ended output, RL = 1 kΩ, printed ± | 4 | ||
| Operating Range (Supply) | 5 | 26 | V | VS=±5 V table | 4 | ||
| Quiescent Current | 7 | 7.6 | mA | VS=±5 V | 4 | ||
| Quiescent Current (Disabled) | 0.7 | 1.6 | mA | VS=±5 V | 4 | ||
| -PSRR | -93 | -82 | dB | VS=±5 V | 4 | ||
| +PSRR | -91 | -83 | dB | VS=±5 V | 4 | ||
| DIS Input Voltage (Disabled) | -4 | V | VS=±5 V, Disabled ≤ −4 V | 4 | |||
| DIS Input Voltage (Enabled) | -2 | V | VS=±5 V, Enabled ≥ −2 V | 4 | |||
| Supply Voltage | 26 | V | 5 | ||||
| Storage Temperature Range | -65 | 125 | °C | 5 | |||
| Operating Temperature Range | -40 | 85 | °C | 5 | |||
| Lead Temperature | 300 | °C | Soldering 10 sec | 5 | |||
| Junction Temperature | 150 | °C | 5 | ||||
| Thermal Resistance Junction-to-Ambient | θJA | 79 | °C/W | 8-Lead SOIC with EP on 4-Layer Board | 5 | ||
| Thermal Resistance Junction-to-Case | θJC | 25 | °C/W | 8-Lead SOIC with EP on 4-Layer Board | 5 | ||
| Input Resistance | 11 | MΩ | VS=±12 V | 3 | |||
| Gain | 2 | V/V | VS=±12 V | 3 | |||
| Gain Error | -0.05 | % | VS=±12 V | 3 | |||
| Differential Output Voltage Noise | 12 | nV/√Hz | VS=±12 V, f = 100 kHz | 3 |
CAD (KiCad official)
- Symbol:
ADA4922-1ARDZ - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOIC-8-EP (KiCad packages3D, STEP)
- 3D model files:
ada4922-1ardz-etched.step/ada4922-1ardz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ada4922-1ardz.step/ada4922-1ardz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (17 pp, sha256
ee33ed4a1a7f2fb0, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).