component
ADA4899-1YRDZ-R7
Public Made by Adomby adom
Analog Devices Operational Amplifier, SOIC-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 7d ago |
| viewers | 7d ago |
| ada4899-1yrdz-r7-etched.glb | 7d ago |
| ada4899-1yrdz-r7-etched.step | 7d ago |
| ada4899-1yrdz-r7-hero.glb | 7d ago |
| ada4899-1yrdz-r7-hero.overlay.json | 7d ago |
| ada4899-1yrdz-r7.glb | 7d ago |
| ada4899-1yrdz-r7.kicad_mod | 7d ago |
| ada4899-1yrdz-r7.kicad_sym | 7d ago |
| ada4899-1yrdz-r7.lbr | 7d ago |
| ada4899-1yrdz-r7.step | 7d ago |
| package.json | 7d ago |
| page.json | 7d ago |
| README.md | 7d ago |
ADA4899-1YRDZ-R7
Analog Devices · Operational Amplifier · SOIC-8-EP
ADA4899-1YRDZ-R7 from Analog Devices, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FEEDBACK | passive | Dedicated feedback pin connected internally to the output, placed on the opposite side of the package from the inverting input to ease connecting the feedback network to -IN. |
| 2 | -IN | input | Inverting input; differential input voltage is limited to ±1.2 V and ±10 mA by internal protection diodes. |
| 3 | +IN | input | Noninverting input; differential input voltage is limited to ±1.2 V and ±10 mA by internal protection diodes. |
| 4 | -VS | power_in | Negative supply pin, isolated from the inputs for low second harmonic distortion; operating supply range is 4.5 V to 12 V total. |
| 5 | -VS | power_in | Second negative supply pin (unused pin 5 of the standard SOIC pinout), allowing either an input-isolated or a traditional board layout. |
| 6 | VOUT | output | Amplifier output, which drives 100 Ω loads and has a short-circuit current of 160/200 mA sinking/sourcing at ±5 V. |
| 7 | +VS | power_in | Positive supply pin; operating supply range is 4.5 V to 12 V, with 12.6 V absolute maximum. |
| 8 | DISABLE | input | Three-state input: pulling it low (below 2.4 V for ±5 V supply) disables the output, floating gives normal operation, and pulling it within 0.7 V of +VS (4.3 V to 5 V) enables input bias current cancellation. |
| 9 | EPAD | passive | Exposed pad on the bottom of the package, which must be soldered to the ground plane for electrical and thermal performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-8-EP |
| Category | Amplifiers/Comparators |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage (±5 V supply) | 35 | 230 | µV | 3 | |||
| Input Bias Current, DISABLE pin floating (±5 V supply) | -6 | -12 | µA | DISABLE pin floating | 3 | ||
| Input Bias Current, DISABLE pin = +VS (±5 V supply) | -0.1 | -1 | µA | DISABLE pin = +VS | 3 | ||
| Input Bias Offset Current (±5 V supply) | 0.05 | 0.7 | µA | 3 | |||
| Open-Loop Gain (±5 V supply) | 82 | 85 | dB | 3 | |||
| Input Common-Mode Voltage Range (±5 V supply) | -3.7 | 3.7 | V | 3 | |||
| Common-Mode Rejection Ratio (±5 V supply) | 98 | 130 | dB | 3 | |||
| DISABLE Input Threshold Voltage (±5 V supply) | 2.4 | V | Output disabled | 3 | |||
| Input Bias Current, DISABLE = +VS (enabled) (±5 V supply) | 17 | 21 | µA | DISABLE = +VS (enabled) | 3 | ||
| Input Bias Current, DISABLE = −VS (disabled) (±5 V supply) | -35 | -44 | µA | DISABLE = −VS (disabled) | 3 | ||
| Output Voltage Swing, first range (±5 V supply) | -3.65 | 3.65 | V | RL = 1 kΩ | 3 | ||
| Output Voltage Swing, second range (±5 V supply) | -3.7 | 3.7 | V | RL = 1 kΩ | 3 | ||
| Output Voltage Swing, first range (±5 V supply) | -3.13 | 3.15 | V | RL = 100 Ω | 3 | ||
| Output Voltage Swing, second range (±5 V supply) | -3.25 | 3.25 | V | RL = 100 Ω | 3 | ||
| Short-Circuit Current (±5 V supply) | 160 | 200 | mA | Sinking/sourcing | 3 | ||
| Operating Range (±5 V supply table) | 4.5 | 12 | V | 3 | |||
| Quiescent Current (±5 V supply) | 14.7 | 16.2 | mA | 3 | |||
| Quiescent Current, disabled (±5 V supply) | 1.8 | 2.1 | mA | DISABLE = −VS | 3 | ||
| Positive Power Supply Rejection Ratio (±5 V supply) | 84 | 90 | dB | +VS = 4 V to 6 V (input referred) | 3 | ||
| Negative Power Supply Rejection Ratio (±5 V supply) | 87 | 93 | dB | −VS = −6 V to −4 V (input referred) | 3 | ||
| Input Offset Voltage (+5 V supply) | 5 | 210 | µV | 4 | |||
| Input Bias Current, DISABLE pin floating (+5 V supply) | -6 | -12 | µA | DISABLE pin floating | 4 | ||
| Input Bias Current, DISABLE pin = +VS (+5 V supply) | -0.2 | -1.5 | µA | DISABLE pin = +VS | 4 | ||
| Open-Loop Gain (+5 V supply) | 76 | 80 | dB | 4 | |||
| Input Common-Mode Voltage Range (+5 V supply) | 1.3 | 3.7 | V | 4 | |||
| Common-Mode Rejection Ratio (+5 V supply) | 90 | 114 | dB | 4 | |||
| DISABLE Input Threshold Voltage (+5 V supply) | 2.4 | V | Output disabled | 4 | |||
| Input Bias Current, DISABLE = +VS (enabled) (+5 V supply) | 16 | 18 | µA | DISABLE = +VS (enabled) | 4 | ||
| Input Bias Current, DISABLE = −VS (disabled) (+5 V supply) | -33 | -42 | µA | DISABLE = −VS (disabled) | 4 | ||
| Output Voltage Swing, first range (+5 V supply) | 1.25 | 3.75 | V | RL = 1 kΩ | 4 | ||
| Output Voltage Swing, second range (+5 V supply) | 1.2 | 3.8 | V | RL = 1 kΩ | 4 | ||
| Output Voltage Swing, first range (+5 V supply) | 1.4 | 3.6 | V | RL = 100 Ω | 4 | ||
| Output Voltage Swing, second range (+5 V supply) | 1.35 | 3.65 | V | RL = 100 Ω | 4 | ||
| Short-Circuit Current (+5 V supply) | 60 | 80 | mA | Sinking/sourcing | 4 | ||
| Operating Range (+5 V supply table) | 4.5 | 12 | V | 4 | |||
| Quiescent Current (+5 V supply) | 14.3 | 16 | mA | 4 | |||
| Quiescent Current, disabled (+5 V supply) | 1.5 | 1.7 | mA | DISABLE = −VS | 4 | ||
| Positive Power Supply Rejection Ratio (+5 V supply) | 84 | 90 | dB | +VS = 4.5 V to 5.5 V, −VS = 0 V (input referred) | 4 | ||
| Negative Power Supply Rejection Ratio (+5 V supply) | 86 | 90 | dB | +VS = 5 V, −VS = −0.5 V to +0.5 V (input referred) | 4 | ||
| Supply Voltage | 12.6 | V | 5 | ||||
| Differential Input Voltage | -1.2 | 1.2 | V | 5 | |||
| Differential Input Current | -10 | 10 | mA | 5 | |||
| Storage Temperature Range | -65 | 150 | °C | 5 | |||
| Operating Temperature Range | -40 | 125 | °C | 5 | |||
| Lead Temperature | 300 | °C | Soldering 10 sec | 5 | |||
| Junction Temperature | 150 | °C | 5 | ||||
| Thermal Resistance, junction-to-ambient (θJA) | θJA | 70 | °C/W | EPAD 8-lead SOIC, JEDEC standard 4-layer board; approximation | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | ground and power planes under the pins of the ADA4899-1 should be cleared of copper to prevent the formation of parasitic | 16 |
CAD (KiCad official)
- Symbol:
ADA4899-1YRDZ-R7 - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOIC-8-EP (KiCad packages3D, STEP)
- 3D model files:
ada4899-1yrdz-r7-etched.step/ada4899-1yrdz-r7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ada4899-1yrdz-r7.step/ada4899-1yrdz-r7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
d9af936c09dbf1f8, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).