component
ADA4862-3YRZ-RL7
Public Made by Adomby adom
Analog Devices Operational Amplifier, SOIC-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 5d ago |
| viewers | 5d ago |
| ada4862-3yrz-rl7-etched.glb | 5d ago |
| ada4862-3yrz-rl7-etched.step | 5d ago |
| ada4862-3yrz-rl7-hero.glb | 5d ago |
| ada4862-3yrz-rl7-hero.overlay.json | 5d ago |
| ada4862-3yrz-rl7.glb | 5d ago |
| ada4862-3yrz-rl7.kicad_mod | 5d ago |
| ada4862-3yrz-rl7.kicad_sym | 5d ago |
| ada4862-3yrz-rl7.lbr | 5d ago |
| ada4862-3yrz-rl7.step | 5d ago |
| package.json | 5d ago |
| page.json | 5d ago |
| README.md | 5d ago |
ADA4862-3YRZ-RL7
Analog Devices · Operational Amplifier · SOIC-14
ADA4862-3YRZ-RL7 from Analog Devices, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | POWER DOWN 1 | input | Power-down pin for amplifier 1: the amplifier powers down when the applied logic level is greater than −VS + 1 V and is enabled when the pin is left floating or is below 1 V above −VS. |
| 2 | POWER DOWN 2 | input | Power-down pin for amplifier 2: the amplifier powers down when the applied logic level is greater than −VS + 1 V and is enabled when the pin is left floating or is below 1 V above −VS. |
| 3 | POWER DOWN 3 | input | Power-down pin for amplifier 3: the amplifier powers down when the applied logic level is greater than −VS + 1 V and is enabled when the pin is left floating or is below 1 V above −VS. |
| 4 | +VS | power_in | Positive supply pin; the operating range is 5 V to 12 V, and the absolute maximum supply voltage is 12.6 V. |
| 5 | +IN 1 | input | Noninverting input of amplifier 1; the common-mode input voltage must not exceed ±VS (absolute maximum rating). |
| 6 | -IN 1 | input | Inverting input of amplifier 1; for unity gain (G = +1, Option 1) this pin is left floating because feedback is provided by the internal 550 Ω resistor. |
| 7 | VOUT1 | output | Output of amplifier 1, which swings −3.5 V to +3.5 V into 150 Ω at ±5 V supplies with a short-circuit current of 115 mA sinking or sourcing. |
| 8 | VOUT3 | output | Output of amplifier 3, which swings −3.5 V to +3.5 V into 150 Ω at ±5 V supplies with a short-circuit current of 115 mA sinking or sourcing. |
| 9 | -IN 3 | input | Inverting input of amplifier 3; for unity gain (G = +1, Option 1) this pin is left floating because feedback is provided by the internal 550 Ω resistor. |
| 10 | +IN 3 | input | Noninverting input of amplifier 3; the common-mode input voltage must not exceed ±VS (absolute maximum rating). |
| 11 | -VS | power_in | Negative supply pin, which is also the logic reference for the power-down pins; in a typical 5 V single-supply application it is connected to analog ground. |
| 12 | +IN 2 | input | Noninverting input of amplifier 2; the common-mode input voltage must not exceed ±VS (absolute maximum rating). |
| 13 | -IN 2 | input | Inverting input of amplifier 2; for unity gain (G = +1, Option 1) this pin is left floating because feedback is provided by the internal 550 Ω resistor. |
| 14 | VOUT2 | output | Output of amplifier 2, which swings −3.5 V to +3.5 V into 150 Ω at ±5 V supplies with a short-circuit current of 115 mA sinking or sourcing. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-14 |
| Category | Operational Amplifier/Comparator |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Offset Voltage (RTO), referred to output | -25 | 3.5 | 25 | mV | VS = +5 V (table header); Referred to output (RTO) | 3 | |
| +Input Bias Current | -2.5 | -0.6 | 1 | μA | VS = +5 V (table header) | 3 | |
| Gain Accuracy | 1.9 | 2 | 2.1 | V/V | VS = +5 V (table header) | 3 | |
| Input Common-Mode Voltage Range | 1 | 4 | V | VS = +5 V (table header); G = +1 | 3 | ||
| Output Voltage Swing | 1.2 | 3.8 | V | VS = +5 V (table header); RL = 150 Ω | 3 | ||
| Output Voltage Swing | 1 | 4 | V | VS = +5 V (table header); RL = 1 kΩ | 3 | ||
| Total Quiescent Current, Enabled | 14 | 16 | 18 | mA | VS = +5 V (table header); Enabled | 3 | |
| Offset Voltage (RTO) | -25 | 2 | 25 | mV | VS = ±5 V (table header) | 4 | |
| +Input Bias Current | -2.5 | -0.6 | 1 | μA | VS = ±5 V (table header) | 4 | |
| Gain Accuracy | 1.9 | 2 | 2.1 | V/V | VS = ±5 V (table header) | 4 | |
| Input Common-Mode Voltage Range | -3.7 | 3.8 | V | VS = ±5 V (table header); G = +1 | 4 | ||
| Output Voltage Swing | -3.5 | 3.5 | V | VS = ±5 V (table header); RL = 150 Ω | 4 | ||
| Output Voltage Swing | -3.9 | 3.9 | V | VS = ±5 V (table header); RL = 1 kΩ | 4 | ||
| Total Quiescent Current, Enabled | 14.5 | 17.9 | 20.5 | mA | VS = ±5 V (table header); Enabled | 4 | |
| Operating Range | 5 | 12 | V | 3 | |||
| Supply Voltage | 12.6 | V | 5 | ||||
| Storage Temperature | -65 | 125 | °C | 5 | |||
| Operating Temperature Range | -40 | 105 | °C | 5 | |||
| Junction Temperature | 150 | °C | 5 | ||||
| Thermal Resistance, junction-to-ambient (θJA) | θJA | 90 | °C/W | 14-lead SOIC; device soldered in circuit board | 5 |
CAD (KiCad official)
- Symbol:
ADA4862-3YRZ-RL7 - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
ada4862-3yrz-rl7-etched.step/ada4862-3yrz-rl7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ada4862-3yrz-rl7.step/ada4862-3yrz-rl7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
70b2992aa0e3caef, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).