component
ADA4062-4ARUZ-RL
Public Made by Adomby adom
Analog Devices FET Input Amplifiers, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 9d ago |
| viewers | 9d ago |
| ada4062-4aruz-rl-etched.glb | 9d ago |
| ada4062-4aruz-rl-etched.step | 9d ago |
| ada4062-4aruz-rl-hero.glb | 9d ago |
| ada4062-4aruz-rl-hero.overlay.json | 9d ago |
| ada4062-4aruz-rl.glb | 9d ago |
| ada4062-4aruz-rl.kicad_mod | 9d ago |
| ada4062-4aruz-rl.kicad_sym | 9d ago |
| ada4062-4aruz-rl.lbr | 9d ago |
| ada4062-4aruz-rl.step | 9d ago |
| package.json | 9d ago |
| page.json | 9d ago |
| README.md | 9d ago |
ADA4062-4ARUZ-RL
Analog Devices · FET Input Amplifiers · TSSOP-14
ADA4062-4ARUZ-RL from Analog Devices, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Output of amplifier A; the datasheet specifies that the device can short to GND indefinitely (short-circuit current 20 mA typical). |
| 2 | -IN A | input | Inverting input of amplifier A; the input voltage must stay within the input voltage range (−11.5 V to +15 V at ±15 V supplies) and the input current must not exceed ±10 mA. |
| 3 | +IN A | input | Non-inverting input of amplifier A; the input voltage must stay within the input voltage range (−11.5 V to +15 V at ±15 V supplies) and the input current must not exceed ±10 mA. |
| 4 | V+ | power_in | Positive supply; the device operates from ±5 V to ±15 V dual supplies and the absolute maximum supply voltage is ±18 V. |
| 5 | +IN B | input | Non-inverting input of amplifier B; the input voltage must stay within the input voltage range (−11.5 V to +15 V at ±15 V supplies) and the input current must not exceed ±10 mA. |
| 6 | -IN B | input | Inverting input of amplifier B; the input voltage must stay within the input voltage range (−11.5 V to +15 V at ±15 V supplies) and the input current must not exceed ±10 mA. |
| 7 | OUT B | output | Output of amplifier B; the datasheet specifies that the device can short to GND indefinitely (short-circuit current 20 mA typical). |
| 8 | OUT C | output | Output of amplifier C; the datasheet specifies that the device can short to GND indefinitely (short-circuit current 20 mA typical). |
| 9 | +IN C | input | Non-inverting input of amplifier C; the input voltage must stay within the input voltage range (−11.5 V to +15 V at ±15 V supplies) and the input current must not exceed ±10 mA. |
| 10 | +IN C | input | Inverting input of amplifier C; the input voltage must stay within the input voltage range (−11.5 V to +15 V at ±15 V supplies) and the input current must not exceed ±10 mA. |
| 11 | V- | power_in | Negative supply; the device operates from ±5 V to ±15 V dual supplies and the absolute maximum supply voltage is ±18 V. |
| 12 | +IN D | input | Non-inverting input of amplifier D; the input voltage must stay within the input voltage range (−11.5 V to +15 V at ±15 V supplies) and the input current must not exceed ±10 mA. |
| 13 | -IN D | input | Inverting input of amplifier D; the input voltage must stay within the input voltage range (−11.5 V to +15 V at ±15 V supplies) and the input current must not exceed ±10 mA. |
| 14 | OUT D | output | Output of amplifier D; the datasheet specifies that the device can short to GND indefinitely (short-circuit current 20 mA typical). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSSOP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage (A grade) | VOS | 0.75 | 2.5 | mV | 3 | ||
| Input Offset Voltage (A grade) | VOS | 5 | mV | −40°C ≤ TA ≤ +125°C | 3 | ||
| Input Bias Current | IB | 2 | 50 | pA | 3 | ||
| Input Bias Current | IB | 5 | nA | −40°C ≤ TA ≤ +125°C | 3 | ||
| Input Offset Current | IOS | 0.5 | 25 | pA | 3 | ||
| Input Offset Current | IOS | 2.5 | nA | −40°C ≤ TA ≤ +125°C | 3 | ||
| Input Voltage Range | -11.5 | 15 | V | −40°C ≤ TA ≤ +125°C | 3 | ||
| Common-Mode Rejection Ratio (A grade) | CMRR | 73 | 90 | dB | VCM = −11.5 V to +11.5 V | 3 | |
| Common-Mode Rejection Ratio (A grade) | CMRR | 70 | dB | −40°C ≤ TA ≤ +125°C | 3 | ||
| Large-Signal Voltage Gain | AVO | 76 | 83 | dB | RL = 10 kΩ, VO = −10 V to +10 V | 3 | |
| Large-Signal Voltage Gain | AVO | 72 | dB | −40°C ≤ TA ≤ +125°C | 3 | ||
| Output Voltage High | VOH | 13 | 13.5 | V | RL = 10 kΩ to VCM | 3 | |
| Output Voltage High | VOH | 12.5 | V | −40°C ≤ TA ≤ +125°C, RL = 10 kΩ to VCM | 3 | ||
| Output Voltage Low | VOL | -13.8 | -13 | V | RL = 10 kΩ to VCM | 3 | |
| Output Voltage Low | VOL | -12.5 | V | −40°C ≤ TA ≤ +125°C, RL = 10 kΩ to VCM | 3 | ||
| Power Supply Rejection Ratio (A grade) | PSRR | 74 | 90 | dB | VSY = ±4 V to ±18 V | 3 | |
| Power Supply Rejection Ratio (A grade) | PSRR | 70 | dB | −40°C ≤ TA ≤ +125°C | 3 | ||
| Supply Current per Amplifier | ISY | 165 | 220 | μA | IO = 0 mA | 3 | |
| Supply Current per Amplifier | ISY | 260 | μA | −40°C ≤ TA ≤ +125°C | 3 | ||
| Supply Voltage | -18 | 18 | V | Printed as ±18 V | 5 | ||
| Input Current | -10 | 10 | mA | Printed as ±10 mA | 5 | ||
| Storage Temperature Range | -65 | 150 | °C | 5 | |||
| Junction Temperature Range | -65 | 150 | °C | 5 | |||
| Lead Temperature | 300 | °C | Soldering, 60 sec | 5 | |||
| Operating Temperature Range | TA | -40 | 125 | °C | 5 | ||
| Dual Supply Voltage Range | VSY | 5 | 15 | V | Dual-supply ±5 V to ±15 V operation, per Features text | 1 | |
| Thermal Resistance, junction-to-ambient (14-Lead TSSOP) | θJA | 112 | °C/W | Standard 4-layer board, surface-mount | 5 | ||
| Thermal Resistance, junction-to-case (14-Lead TSSOP) | θJC | 35 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
ADA4062-4ARUZ-RL - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
ada4062-4aruz-rl-etched.step/ada4062-4aruz-rl-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ada4062-4aruz-rl.step/ada4062-4aruz-rl.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
6aa8acd5c85366cf, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).