AD9910BSVZ-REEL

{
  "schema_version": 1,
  "type": "component",
  "slug": "ad9910bsvz-reel",
  "title": "AD9910BSVZ-REEL",
  "brief": "Analog Devices Direct Digital Synthesis (DDS), TQFP-100-EP(14x14). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "data acquisition",
    "ad9910bsvz-reel"
  ],
  "component": {
    "mpn": "AD9910BSVZ-REEL",
    "manufacturer": "Analog Devices",
    "package": "TQFP-100-EP(14x14)",
    "pin_count": 101,
    "category": "Data Acquisition",
    "subcategory": "Direct Digital Synthesis (DDS)",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589839071616278528",
    "parts": {
      "symbol": "ad9910bsvz-reel.kicad_sym",
      "footprint": "ad9910bsvz-reel.kicad_mod",
      "model_3d": "ad9910bsvz-reel-etched.glb",
      "model_3d_plain": "ad9910bsvz-reel.glb",
      "model_3d_step": "ad9910bsvz-reel-etched.step",
      "model_3d_step_plain": "ad9910bsvz-reel.step",
      "lbr": "ad9910bsvz-reel.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "NC",
        "type": "unconnected",
        "description": "Not Connected. Allow device pin to float."
      },
      {
        "number": "2",
        "name": "PLL_LOOP_FILTER",
        "type": "passive",
        "description": "PLL Loop Filter Compensation Pin. External RC network sets loop dynamics of the REFCLK multiplier PLL."
      },
      {
        "number": "3",
        "name": "AVDD_1V8",
        "type": "power_in",
        "description": "Analog Core VDD, 1.8 V analog supply."
      },
      {
        "number": "4",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog Ground."
      },
      {
        "number": "5",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog Ground."
      },
      {
        "number": "6",
        "name": "AVDD_1V8",
        "type": "power_in",
        "description": "Analog Core VDD, 1.8 V analog supply."
      },
      {
        "number": "7",
        "name": "SYNC_IN+",
        "type": "input",
        "description": "LVDS synchronization signal input (rising edge active). Positive leg of differential sync input from an external master to synchronize internal subclocks."
      },
      {
        "number": "8",
        "name": "SYNC_IN-",
        "type": "input",
        "description": "LVDS synchronization signal input. Negative leg of differential sync input from an external master to synchronize internal subclocks."
      },
      {
        "number": "9",
        "name": "SYNC_OUT+",
        "type": "output",
        "description": "LVDS synchronization signal output (rising edge active). Positive leg of differential sync output used to synchronize external slave devices."
      },
      {
        "number": "10",
        "name": "SYNC_OUT-",
        "type": "output",
        "description": "LVDS synchronization signal output. Negative leg of differential sync output used to synchronize external slave devices."
      },
      {
        "number": "11",
        "name": "DVDD_IO_3V3",
        "type": "power_in",
        "description": "Digital Input/Output VDD, 3.3 V digital supply."
      },
      {
        "number": "12",
        "name": "SYNC_SMP_ERR",
        "type": "output",
        "description": "Synchronization Sample Error, digital output (active high). A high indicates the AD9910 did not receive a valid sync signal on SYNC_IN+/SYNC_IN-."
      },
      {
        "number": "13",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital Ground."
      },
      {
        "number": "14",
        "name": "MASTER_RESET",
        "type": "input",
        "description": "Master Reset, digital input (active high). Clears all memory elements and sets registers to default values."
      },
      {
        "number": "15",
        "name": "DVDD_IO_3V3",
        "type": "power_in",
        "description": "Digital Input/Output VDD, 3.3 V digital supply."
      },
      {
        "number": "16",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital Ground."
      },
      {
        "number": "17",
        "name": "DVDD_1V8",
        "type": "power_in",
        "description": "Digital Core VDD, 1.8 V digital supply."
      },
      {
        "number": "18",
        "name": "EXT_PWR_DWN",
        "type": "input",
        "description": "External Power-Down, digital input (active high). Initiates the currently programmed power-down mode. Tie to ground if unused."
      },
      {
        "number": "19",
        "name": "PLL_LOCK",
        "type": "output",
        "description": "Clock Multiplier PLL Lock, digital output (active high). A high indicates the REFCLK multiplier PLL has acquired lock."
      },
      {
        "number": "20",
        "name": "NC",
        "type": "unconnected",
        "description": "Not Connected. Allow device pin to float."
      },
      {
        "number": "21",
        "name": "DVDD_IO_3V3",
        "type": "power_in",
        "description": "Digital Input/Output VDD, 3.3 V digital supply."
      },
      {
        "number": "22",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital Ground."
      },
      {
        "number": "23",
        "name": "DVDD_1V8",
        "type": "power_in",
        "description": "Digital Core VDD, 1.8 V digital supply."
      },
      {
        "number": "24",
        "name": "RAM_SWP_OVR",
        "type": "output",
        "description": "RAM Sweep Over, digital output (active high). A high indicates that the RAM sweep profile has completed."
      },
      {
        "number": "25",
        "name": "D15",
        "type": "input",
        "description": "Parallel Input Bus bit 15 (active high). Modulation data for the parallel data port."
      },
      {
        "number": "26",
        "name": "D14",
        "type": "input",
        "description": "Parallel Input Bus bit 14 (active high)."
      },
      {
        "number": "27",
        "name": "D13",
        "type": "input",
        "description": "Parallel Input Bus bit 13 (active high)."
      },
      {
        "number": "28",
        "name": "DVDD_IO_3V3",
        "type": "power_in",
        "description": "Digital Input/Output VDD, 3.3 V digital supply."
      },
      {
        "number": "29",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital Ground."
      },
      {
        "number": "30",
        "name": "DVDD_1V8",
        "type": "power_in",
        "description": "Digital Core VDD, 1.8 V digital supply."
      },
      {
        "number": "31",
        "name": "D12",
        "type": "input",
        "description": "Parallel Input Bus bit 12 (active high)."
      },
      {
        "number": "32",
        "name": "D11",
        "type": "input",
        "description": "Parallel Input Bus bit 11 (active high)."
      },
      {
        "number": "33",
        "name": "D10",
        "type": "input",
        "description": "Parallel Input Bus bit 10 (active high)."
      },
      {
        "number": "34",
        "name": "D9",
        "type": "input",
        "description": "Parallel Input Bus bit 9 (active high)."
      },
      {
        "number": "35",
        "name": "D8",
        "type": "input",
        "description": "Parallel Input Bus bit 8 (active high)."
      },
      {
        "number": "36",
        "name": "D7",
        "type": "input",
        "description": "Parallel Input Bus bit 7 (active high)."
      },
      {
        "number": "37",
        "name": "D6",
        "type": "input",
        "description": "Parallel Input Bus bit 6 (active high)."
      },
      {
        "number": "38",
        "name": "D5",
        "type": "input",
        "description": "Parallel Input Bus bit 5 (active high)."
      },
      {
        "number": "39",
        "name": "D4",
        "type": "input",
        "description": "Parallel Input Bus bit 4 (active high)."
      },
      {
        "number": "40",
        "name": "PDCLK",
        "type": "output",
        "description": "Parallel Data Clock, digital output. Provides a timing signal for aligning data at the parallel inputs."
      },
      {
        "number": "41",
        "name": "TxENABLE",
        "type": "input",
        "description": "Transmit Enable, digital input (active high). In burst mode a high indicates new data for transmission; in continuous mode this pin remains high."
      },
      {
        "number": "42",
        "name": "D3",
        "type": "input",
        "description": "Parallel Input Bus bit 3 (active high)."
      },
      {
        "number": "43",
        "name": "D2",
        "type": "input",
        "description": "Parallel Input Bus bit 2 (active high)."
      },
      {
        "number": "44",
        "name": "D1",
        "type": "input",
        "description": "Parallel Input Bus bit 1 (active high)."
      },
      {
        "number": "45",
        "name": "DVDD_IO_3V3",
        "type": "power_in",
        "description": "Digital Input/Output VDD, 3.3 V digital supply."
      },
      {
        "number": "46",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital Ground."
      },
      {
        "number": "47",
        "name": "DVDD_1V8",
        "type": "power_in",
        "description": "Digital Core VDD, 1.8 V digital supply."
      },
      {
        "number": "48",
        "name": "D0",
        "type": "input",
        "description": "Parallel Input Bus bit 0 (active high)."
      },
      {
        "number": "49",
        "name": "F1",
        "type": "input",
        "description": "Modulation Format Pin F[1]. Digital input that determines the parallel-port modulation format."
      },
      {
        "number": "50",
        "name": "F0",
        "type": "input",
        "description": "Modulation Format Pin F[0]. Digital input that determines the parallel-port modulation format."
      },
      {
        "number": "51",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital Ground."
      },
      {
        "number": "52",
        "name": "PROFILE2",
        "type": "input",
        "description": "Profile Select Pin bit 2 (active high). Selects one of eight phase/frequency profiles for the DDS."
      },
      {
        "number": "53",
        "name": "PROFILE1",
        "type": "input",
        "description": "Profile Select Pin bit 1 (active high). Selects one of eight phase/frequency profiles for the DDS."
      },
      {
        "number": "54",
        "name": "PROFILE0",
        "type": "input",
        "description": "Profile Select Pin bit 0 (active high). Selects one of eight phase/frequency profiles for the DDS."
      },
      {
        "number": "55",
        "name": "SYNC_CLK",
        "type": "output",
        "description": "Output Clock Divided-By-Four. Digital output clock; many digital inputs (I/O_UPDATE, PROFILE[2:0], etc.) must be set up on the rising edge of this signal."
      },
      {
        "number": "56",
        "name": "DVDD_IO_3V3",
        "type": "power_in",
        "description": "Digital Input/Output VDD, 3.3 V digital supply."
      },
      {
        "number": "57",
        "name": "DVDD_1V8",
        "type": "power_in",
        "description": "Digital Core VDD, 1.8 V digital supply."
      },
      {
        "number": "58",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital Ground."
      },
      {
        "number": "59",
        "name": "I/O_UPDATE",
        "type": "bidirectional",
        "description": "Input/Output Update, digital I/O (active high). A high transfers the contents of the I/O buffers to the corresponding internal registers."
      },
      {
        "number": "60",
        "name": "OSK",
        "type": "input",
        "description": "Output Shift Keying, digital input (active high). Controls the OSK function; in manual mode toggles amplitude between zero and programmed scale, in automatic mode sweeps amplitude down/up."
      },
      {
        "number": "61",
        "name": "DROVER",
        "type": "output",
        "description": "Digital Ramp Over, digital output (active high). Switches high whenever the digital ramp generator reaches its programmed upper or lower limit."
      },
      {
        "number": "62",
        "name": "DRCTL",
        "type": "input",
        "description": "Digital Ramp Control, digital input (active high). Controls the slope polarity of the digital ramp generator. Tie low if DRG unused."
      },
      {
        "number": "63",
        "name": "DRHOLD",
        "type": "input",
        "description": "Digital Ramp Hold, digital input (active high). Stalls the digital ramp generator in its present state. Tie low if DRG unused."
      },
      {
        "number": "64",
        "name": "DVDD_1V8",
        "type": "power_in",
        "description": "Digital Core VDD, 1.8 V digital supply."
      },
      {
        "number": "65",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital Ground."
      },
      {
        "number": "66",
        "name": "DVDD_IO_3V3",
        "type": "power_in",
        "description": "Digital Input/Output VDD, 3.3 V digital supply."
      },
      {
        "number": "67",
        "name": "SDIO",
        "type": "bidirectional",
        "description": "Serial Data Input/Output (active high). Bidirectional serial data line by default; unidirectional (input only) when configured."
      },
      {
        "number": "68",
        "name": "SDO",
        "type": "output",
        "description": "Serial Data Output, digital output (active high). Only active in unidirectional serial data mode; leave floating in bidirectional mode."
      },
      {
        "number": "69",
        "name": "SCLK",
        "type": "input",
        "description": "Serial Data Clock. Rising edge on write, falling edge on read. Provides the serial data clock for the control data path."
      },
      {
        "number": "70",
        "name": "CS",
        "type": "input",
        "description": "Chip Select, digital input (active low). Low enables the AD9910 to detect serial clock rising/falling edges on the serial data pins; high causes it to ignore input."
      },
      {
        "number": "71",
        "name": "I/O_RESET",
        "type": "input",
        "description": "Input/Output Reset, digital input (active high). Used when a serial I/O communication cycle fails. Tie to ground when not used."
      },
      {
        "number": "72",
        "name": "NC",
        "type": "unconnected",
        "description": "Not Connected. Allow device pin to float."
      },
      {
        "number": "73",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog Ground."
      },
      {
        "number": "74",
        "name": "AVDD_3V3",
        "type": "power_in",
        "description": "Analog DAC VDD, 3.3 V analog supply."
      },
      {
        "number": "75",
        "name": "AVDD_3V3",
        "type": "power_in",
        "description": "Analog DAC VDD, 3.3 V analog supply."
      },
      {
        "number": "76",
        "name": "AVDD_3V3",
        "type": "power_in",
        "description": "Analog DAC VDD, 3.3 V analog supply."
      },
      {
        "number": "77",
        "name": "AVDD_3V3",
        "type": "power_in",
        "description": "Analog DAC VDD, 3.3 V analog supply."
      },
      {
        "number": "78",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog Ground."
      },
      {
        "number": "79",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog Ground."
      },
      {
        "number": "80",
        "name": "IOUTB",
        "type": "output",
        "description": "Open-Drain DAC Complementary Output Source, analog current-mode output. Connect through a 50 ohm resistor to AGND."
      },
      {
        "number": "81",
        "name": "IOUT",
        "type": "output",
        "description": "Open-Drain DAC Output Source, analog current-mode output. Connect through a 50 ohm resistor to AGND."
      },
      {
        "number": "82",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog Ground."
      },
      {
        "number": "83",
        "name": "AVDD_3V3",
        "type": "power_in",
        "description": "Analog DAC VDD, 3.3 V analog supply."
      },
      {
        "number": "84",
        "name": "DAC_RSET",
        "type": "passive",
        "description": "Analog Reference Pin. Programs the DAC output full-scale reference current. Attach a 10 kohm resistor to AGND."
      },
      {
        "number": "85",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog Ground."
      },
      {
        "number": "86",
        "name": "NC",
        "type": "unconnected",
        "description": "Not Connected. Allow device pin to float."
      },
      {
        "number": "87",
        "name": "NC",
        "type": "unconnected",
        "description": "Not Connected. Allow device pin to float."
      },
      {
        "number": "88",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog Ground."
      },
      {
        "number": "89",
        "name": "AVDD_1V8",
        "type": "power_in",
        "description": "Analog Core VDD, 1.8 V analog supply."
      },
      {
        "number": "90",
        "name": "REF_CLK",
        "type": "input",
        "description": "Reference Clock Input, analog input. Can be driven by an external oscillator or connected to a crystal when the internal oscillator is engaged."
      },
      {
        "number": "91",
        "name": "REF_CLKB",
        "type": "input",
        "description": "Reference Clock Input (complementary), analog input. Negative leg of the differential reference clock."
      },
      {
        "number": "92",
        "name": "AVDD_1V8",
        "type": "power_in",
        "description": "Analog Core VDD, 1.8 V analog supply."
      },
      {
        "number": "93",
        "name": "NC",
        "type": "unconnected",
        "description": "Not Connected. Allow device pin to float."
      },
      {
        "number": "94",
        "name": "REFCLK_OUT",
        "type": "output",
        "description": "Crystal Output, analog output. Used with the internal oscillator when driven from a crystal (see REF_CLK Overview)."
      },
      {
        "number": "95",
        "name": "XTAL_SEL",
        "type": "input",
        "description": "Crystal Select (1.8 V logic), analog input (active high). Driving high enables the internal oscillator to be used with a crystal resonator. Tie to AGND if unused."
      },
      {
        "number": "96",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog Ground."
      },
      {
        "number": "97",
        "name": "NC",
        "type": "unconnected",
        "description": "Not Connected. Allow device pin to float."
      },
      {
        "number": "98",
        "name": "NC",
        "type": "unconnected",
        "description": "Not Connected. Allow device pin to float."
      },
      {
        "number": "99",
        "name": "NC",
        "type": "unconnected",
        "description": "Not Connected. Allow device pin to float."
      },
      {
        "number": "100",
        "name": "NC",
        "type": "unconnected",
        "description": "Not Connected. Allow device pin to float."
      },
      {
        "number": "EPAD",
        "name": "EPAD",
        "type": "power_in",
        "description": "Exposed Paddle. Must be soldered to ground for proper thermal and electrical performance."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589839071616278528",
        "pages": 64,
        "sha256": "e84adc31ccf0b2ff",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 101,
        "described": 101,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ad9910bsvz-reel.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          16.0,
          16.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "314374673bd811b10c21a39b9546bd3b41036bb20ecbe74938fe730857e24e44",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ad9910bsvz-reel-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          16.0,
          16.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "971ddc2cef7ecba5f18bfa3d859d939dab9905aa3b05a10a48b9360143419d80",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Analog Devices",
      "Package": "TQFP-100-EP(14x14)",
      "Category": "Data Acquisition",
      "Pins": "101"
    }
  },
  "variants": [
    {
      "mpn": "AD9910BSVZ-REEL",
      "kind": "packaging"
    }
  ],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ad9910bsvz-reel"
  ],
  "discovery_pitch": "AD9910BSVZ-REEL (Analog Devices) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ad9910bsvz-reel.kicad_sym",
    "ad9910bsvz-reel.kicad_mod",
    "ad9910bsvz-reel.glb",
    "ad9910bsvz-reel.step",
    "ad9910bsvz-reel.lbr",
    "docs/hero.png",
    "docs/ad9910bsvz-reel-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-24T15:46:47.943Z"
}