component
AD9763ASTZ
Public Made by Adomby adom
Analog Devices Digital To Analog Converters (DACs), LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
AD9763ASTZ
Analog Devices · Digital To Analog Converters (DACs) · LQFP-48(7x7)
AD9763ASTZ from Analog Devices, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DB9P1 (MSB) | input | Port 1 data bit 9 (MSB) of the 10-bit dual-port data bus for DAC1; digital inputs are limited to DCOM1 −0.3 V to DVDD1 +0.3 V. |
| 2 | DB8P1 | input | Port 1 data bit 8 for DAC1; digital inputs are limited to DCOM1 −0.3 V to DVDD1 +0.3 V. |
| 3 | DB7P1 | input | Port 1 data bit 7 for DAC1; digital inputs are limited to DCOM1 −0.3 V to DVDD1 +0.3 V. |
| 4 | DB6P1 | input | Port 1 data bit 6 for DAC1; digital inputs are limited to DCOM1 −0.3 V to DVDD1 +0.3 V. |
| 5 | DB5P1 | input | Port 1 data bit 5 for DAC1; digital inputs are limited to DCOM1 −0.3 V to DVDD1 +0.3 V. |
| 6 | DB4P1 | input | Port 1 data bit 4 for DAC1; digital inputs are limited to DCOM1 −0.3 V to DVDD1 +0.3 V. |
| 7 | DB3P1 | input | Port 1 data bit 3 for DAC1; digital inputs are limited to DCOM1 −0.3 V to DVDD1 +0.3 V. |
| 8 | DB2P1 | input | Port 1 data bit 2 for DAC1; digital inputs are limited to DCOM1 −0.3 V to DVDD1 +0.3 V. |
| 9 | DB1P1 | input | Port 1 data bit 1 for DAC1; digital inputs are limited to DCOM1 −0.3 V to DVDD1 +0.3 V. |
| 10 | DB0P1 (LSB) | input | Port 1 data bit 0 (LSB) for DAC1; digital inputs are limited to DCOM1 −0.3 V to DVDD1 +0.3 V. |
| 11 | NC | unconnected | No connect on the AD9763. |
| 12 | NC | unconnected | No connect on the AD9763. |
| 13 | NC | unconnected | No connect on the AD9763. |
| 14 | NC | unconnected | No connect on the AD9763. |
| 15 | DCOM1 | power_in | Digital common (ground) for the DAC1 digital interface; DCOM1 is referenced to ACOM within −0.3 V to +0.3 V. |
| 16 | DVDD1 | power_in | Digital supply for the DAC1 digital interface; absolute maximum DVDD1 to DCOM1 is −0.3 V to +6.5 V (typical characterization uses DVDD = 3.3 V). |
| 17 | WRT1/IQWRT | input | Write signal for Port 1 data latch (IQWRT in interleaved mode); digital inputs are limited to DCOM1 −0.3 V to DVDD1 +0.3 V. |
| 18 | CLK1/IQCLK | input | Clock input for DAC1 (IQCLK in interleaved mode), supporting update rates up to 125 MSPS; digital inputs are limited to DCOM1 −0.3 V to DVDD1 +0.3 V. |
| 19 | CLK2/IQRESET | input | Clock input for DAC2 (IQRESET in interleaved mode), supporting update rates up to 125 MSPS; digital inputs are limited to DCOM2 −0.3 V to DVDD2 +0.3 V. |
| 20 | WRT2/IQSEL | input | Write signal for Port 2 data latch (IQSEL in interleaved mode); digital inputs are limited to DCOM2 −0.3 V to DVDD2 +0.3 V. |
| 21 | DCOM2 | power_in | Digital common (ground) for the DAC2 digital interface; DCOM2 is referenced to ACOM within −0.3 V to +0.3 V. |
| 22 | DVDD2 | power_in | Digital supply for the DAC2 digital interface; absolute maximum DVDD2 to DCOM2 is −0.3 V to +6.5 V (typical characterization uses DVDD = 3.3 V). |
| 23 | DB9P2 | input | Port 2 data bit 9 (MSB) of the 10-bit data bus for DAC2; digital inputs are limited to DCOM2 −0.3 V to DVDD2 +0.3 V. |
| 24 | DB8P2 | input | Port 2 data bit 8 for DAC2; digital inputs are limited to DCOM2 −0.3 V to DVDD2 +0.3 V. |
| 25 | DB7P2 | input | Port 2 data bit 7 for DAC2; digital inputs are limited to DCOM2 −0.3 V to DVDD2 +0.3 V. |
| 26 | DB6P2 | input | Port 2 data bit 6 for DAC2; digital inputs are limited to DCOM2 −0.3 V to DVDD2 +0.3 V. |
| 27 | DB5P2 | input | Port 2 data bit 5 for DAC2; digital inputs are limited to DCOM2 −0.3 V to DVDD2 +0.3 V. |
| 28 | DB4P2 | input | Port 2 data bit 4 for DAC2; digital inputs are limited to DCOM2 −0.3 V to DVDD2 +0.3 V. |
| 29 | DB3P2 | input | Port 2 data bit 3 for DAC2; digital inputs are limited to DCOM2 −0.3 V to DVDD2 +0.3 V. |
| 30 | DB2P2 | input | Port 2 data bit 2 for DAC2; digital inputs are limited to DCOM2 −0.3 V to DVDD2 +0.3 V. |
| 31 | DB1P2 | input | Port 2 data bit 1 for DAC2; digital inputs are limited to DCOM2 −0.3 V to DVDD2 +0.3 V. |
| 32 | DB0P2 (LSB) | input | Port 2 data bit 0 (LSB) for DAC2; digital inputs are limited to DCOM2 −0.3 V to DVDD2 +0.3 V. |
| 33 | NC | unconnected | No connect on the AD9763. |
| 34 | NC | unconnected | No connect on the AD9763. |
| 35 | NC | unconnected | No connect on the AD9763. |
| 36 | NC | unconnected | No connect on the AD9763. |
| 37 | SLEEP | input | Power-down control input for sleep mode, used for low-power idle periods; the input is limited to ACOM −0.3 V to AVDD +0.3 V. |
| 38 | ACOM | power_in | Analog common (ground) for the DACs and reference; AVDD to ACOM is rated −0.3 V to +6.5 V. |
| 39 | IOUTA2 | output | Port 2 true differential DAC current output (nominal 20 mA full scale); outputs are rated ACOM −1.0 V to AVDD +0.3 V. |
| 40 | IOUTB2 | output | Port 2 complementary differential DAC current output (nominal 20 mA full scale); outputs are rated ACOM −1.0 V to AVDD +0.3 V. |
| 41 | FSADJ2 | passive | Full-scale current output adjust for DAC2 (set by external resistor); rated ACOM −0.3 V to AVDD +0.3 V. |
| 42 | GAINCTRL | input | Master/slave resistor control mode select for setting full-scale current of the two DACs; rated ACOM −0.3 V to AVDD +0.3 V. |
| 43 | REFIO | bidirectional | Reference input/output for the on-chip 1.20 V temperature-compensated bandgap reference; rated ACOM −0.3 V to AVDD +0.3 V. |
| 44 | FSADJ1 | passive | Full-scale current output adjust for DAC1 (set by external resistor); rated ACOM −0.3 V to AVDD +0.3 V. |
| 45 | IOUTB1 | output | Port 1 complementary differential DAC current output (nominal 20 mA full scale); outputs are rated ACOM −1.0 V to AVDD +0.3 V. |
| 46 | IOUTA1 | output | Port 1 true differential DAC current output (nominal 20 mA full scale); outputs are rated ACOM −1.0 V to AVDD +0.3 V. |
| 47 | AVDD | power_in | Analog supply voltage, operable from 3.3 V to 5 V; absolute maximum AVDD to ACOM is −0.3 V to +6.5 V. |
| 48 | MODE | input | Mode select (1 = dual-port, 0 = interleaved data input); rated DCOM1/DCOM2 −0.3 V to DVDD1/DVDD2 +0.3 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | LQFP-48(7x7) |
| Category | ADC/DAC/Data Conversion |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Range | -40 | 85 | °C | 5 | |||
| Supply Voltage AVDD | AVDD | 3 | 5 | 5.5 | V | 5 | |
| Supply Voltage DVDD1, DVDD2 | DVDD1, DVDD2 | 2.7 | 5 | 5.5 | V | 5 | |
| Integral Linearity Error (INL) | INL | -1.5 | 0.4 | 1.5 | LSB | TA = 25°C | 5 |
| Integral Linearity Error (INL) | INL | -2 | 2 | LSB | TMIN to TMAX | 5 | |
| Differential Nonlinearity (DNL) | DNL | -0.5 | 0.07 | 0.5 | LSB | TA = 25°C | 5 |
| Differential Nonlinearity (DNL) | DNL | -1 | 1 | LSB | TMIN to TMAX | 5 | |
| Offset Error | -0.02 | 0.02 | % of FSR | 5 | |||
| Gain Error Without Internal Reference | -2 | 0.25 | 2 | % of FSR | 5 | ||
| Gain Error With Internal Reference | -5 | 1 | 5 | % of FSR | 5 | ||
| Gain Match | -1.6 | 0.1 | 1.6 | % of FSR | 5 | ||
| Full-Scale Output Current | IOUTFS | 2 | 20 | mA | 5 | ||
| Output Compliance Range | -1 | 1.25 | V | 5 | |||
| Output Resistance | 100 | kΩ | 5 | ||||
| Output Capacitance | 5 | pF | 5 | ||||
| Reference Voltage | 1.14 | 1.2 | 1.26 | V | 5 | ||
| Reference Output Current | 100 | nA | External buffer amplifier with input bias current <100 nA should be used to drive any external load | 5 | |||
| Reference Input Compliance Range | 0.1 | 1.25 | V | 5 | |||
| Reference Input Resistance | 1 | MΩ | 5 | ||||
| Small-Signal Bandwidth | 0.5 | MHz | 5 | ||||
| Gain Drift Without Internal Reference | -50 | 50 | ppm of FSR/°C | 5 | |||
| Gain Drift With Internal Reference | -100 | 100 | ppm of FSR/°C | 5 | |||
| Reference Voltage Drift | -50 | 50 | ppm/°C | 5 | |||
| Analog Supply Current | IAVDD | 71 | 75 | mA | 5 | ||
| Digital Supply Current | IDVDD | 5 | 7 | mA | Measured at fCLK = 25 MSPS and fOUT = 1.0 MHz | 5 | |
| Digital Supply Current | IDVDD | 15 | mA | Measured at fCLK = 100 MSPS and fOUT = 1 MHz | 5 | ||
| Supply Current Sleep Mode | IAVDD | 8 | 12 | mA | SLEEP mode | 5 | |
| Power Dissipation (5 V, IOUTFS = 20 mA) | 380 | 410 | mW | Measured at fCLK = 25 MSPS and fOUT = 1.0 MHz | 5 | ||
| Power Dissipation (5 V, IOUTFS = 20 mA) | 420 | 450 | mW | Measured at fCLK = 100 MSPS and fOUT = 1 MHz | 5 | ||
| Power Dissipation (5 V, IOUTFS = 20 mA) | 450 | mW | Unbuffered voltage output, IOUTFS = 20 mA, RLOAD = 50 Ω at IOUTA and IOUTB, fCLK = 100 MSPS, fOUT = 40 MHz | 5 | |||
| Power Supply Rejection Ratio AVDD | -0.4 | 0.4 | % of FSR/V | ±10% power supply variation | 5 | ||
| Power Supply Rejection Ratio DVDD | -0.025 | 0.025 | % of FSR/V | ±10% power supply variation | 5 | ||
| Maximum Output Update Rate | fCLK | 125 | MSPS | 6 | |||
| Output Settling Time to 0.1% | tST | 35 | ns | Measured single-ended into 50 Ω load | 6 | ||
| Output Propagation Delay | tPD | 1 | ns | 6 | |||
| Glitch Impulse | 5 | pV-s | 6 | ||||
| Output Rise Time (10% to 90%) | 2.5 | ns | Measured single-ended into 50 Ω load | 6 | |||
| Output Fall Time (90% to 10%) | 2.5 | ns | Measured single-ended into 50 Ω load | 6 | |||
| Output Noise | 50 | pA/√Hz | IOUTFS = 20 mA | 6 | |||
| Output Noise | 30 | pA/√Hz | IOUTFS = 2 mA | 6 | |||
| Spurious-Free Dynamic Range to Nyquist | 69 | 78 | dBc | fCLK = 100 MSPS, fOUT = 1.00 MHz; 0 dBFS Output | 6 | ||
| Spurious-Free Dynamic Range to Nyquist | 74 | dBc | fCLK = 100 MSPS, fOUT = 1.00 MHz; -6 dBFS Output | 6 | |||
| Spurious-Free Dynamic Range to Nyquist | 69 | dBc | fCLK = 100 MSPS, fOUT = 1.00 MHz; -12 dBFS Output | 6 | |||
| Spurious-Free Dynamic Range to Nyquist | 79 | dBc | fCLK = 65 MSPS, fOUT = 1.00 MHz | 6 | |||
| Digital Input Logic 1 Voltage | VIH | 3.5 | 5 | V | DVDD1 = DVDD2 = 5 V | 7 | |
| Digital Input Logic 1 Voltage | VIH | 2.1 | 3 | V | DVDD1 = DVDD2 = 3.3 V | 7 | |
| Digital Input Logic 0 Voltage | VIL | 0 | 1.3 | V | DVDD1 = DVDD2 = 5 V | 7 | |
| Digital Input Logic 0 Voltage | VIL | 0 | 0.9 | V | DVDD1 = DVDD2 = 3.3 V | 7 | |
| Logic 1 Current | -10 | 10 | μA | 7 | |||
| Logic 0 Current | -10 | 10 | μA | 7 | |||
| Input Capacitance | 5 | pF | 7 | ||||
| Input Setup Time | tS | 2 | ns | 7 | |||
| Input Hold Time | tH | 1.5 | ns | 7 | |||
| Latch Pulse Width | tLPW, tCPW | 3.5 | ns | 7 | |||
| AVDD to ACOM | AVDD | -0.3 | 6.5 | V | With respect to ACOM | 8 | |
| DVDD1, DVDD2 to DCOM1/DCOM2 | DVDD1, DVDD2 | -0.3 | 6.5 | V | With respect to DCOM1/DCOM2 | 8 | |
| ACOM to DCOM1/DCOM2 | -0.3 | 0.3 | V | With respect to DCOM1/DCOM2 | 8 | ||
| AVDD to DVDD1/DVDD2 | -6.5 | 6.5 | V | With respect to DVDD1/DVDD2 | 8 | ||
| Digital Inputs (MODE, CLK1/IQCLK, CLK2/IQRESET, WRT1/IQWRT, WRT2/IQSEL) | -0.3 | V | With respect to DCOM1/DCOM2; upper limit DVDD1/DVDD2 + 0.3 V | 8 | |||
| IOUTA1/IOUTA2, IOUTB1/IOUTB2 | -1 | V | With respect to ACOM; upper limit AVDD + 0.3 V | 8 | |||
| REFIO, FSADJ1, FSADJ2 | -0.3 | V | With respect to ACOM; upper limit AVDD + 0.3 V | 8 | |||
| GAINCTRL, SLEEP | -0.3 | V | With respect to ACOM; upper limit AVDD + 0.3 V | 8 | |||
| Junction Temperature | 150 | °C | 8 | ||||
| Storage Temperature Range | -65 | 150 | °C | 8 | |||
| Thermal Resistance Junction-to-Ambient (θJA), 48-Lead LQFP | θJA | 91 | °C/W | Worst-case: device soldered in a circuit board for surface-mount packages | 8 |
CAD (KiCad official)
- Symbol:
AD9763ASTZ - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
ad9763astz-etched.step/ad9763astz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad9763astz.step/ad9763astz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (44 pp, sha256
f7dd0a49e6e2b57d, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).