3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAD9245BCPZRL7-20
Analog Devices · Analog To Digital Converters (ADCs) · LFCSP-32(5x5)
AD9245BCPZRL7-20 from Analog Devices, in a LFCSP-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Do not connect to this pin. |
| 2 | CLK | input | Single-ended clock input that controls all internal conversion cycles. |
| 3 | DNC | unconnected | Do not connect to this pin. |
| 4 | PDWN | input | Power-down function select input. |
| 5 | D0 | output | Data output bit 0 (LSB), driven from the DRVDD supply. |
| 6 | D1 | output | Data output bit 1, driven from the DRVDD supply. |
| 7 | D2 | output | Data output bit 2, driven from the DRVDD supply. |
| 8 | D3 | output | Data output bit 3, driven from the DRVDD supply. |
| 9 | D4 | output | Data output bit 4, driven from the DRVDD supply. |
| 10 | D5 | output | Data output bit 5, driven from the DRVDD supply. |
| 11 | D6 | output | Data output bit 6, driven from the DRVDD supply. |
| 12 | D7 | output | Data output bit 7, driven from the DRVDD supply. |
| 13 | D8 | output | Data output bit 8, driven from the DRVDD supply. |
| 14 | D9 | output | Data output bit 9, driven from the DRVDD supply. |
| 15 | DGND | power_in | Digital output ground. |
| 16 | DRVDD | power_in | Digital output driver supply, specified 2.25 V to 3.6 V. |
| 17 | D10 | output | Data output bit 10, driven from the DRVDD supply. |
| 18 | D11 | output | Data output bit 11, driven from the DRVDD supply. |
| 19 | D12 | output | Data output bit 12, driven from the DRVDD supply. |
| 20 | D13 | output | Data output bit 13 (MSB), driven from the DRVDD supply. |
| 21 | OTR | output | Out-of-range indicator that flags an input beyond the selected range and is used with the MSB to determine low or high overflow. |
| 22 | MODE | input | Data format select and duty cycle stabilizer mode selection (offset binary or twos complement). |
| 23 | SENSE | input | Reference mode selection input. |
| 24 | VREF | power_in | Voltage reference input/output. |
| 25 | REFB | passive | Differential reference (-) connection. |
| 26 | REFT | passive | Differential reference (+) connection. |
| 27 | AVDD | power_in | Analog power supply, specified 2.7 V to 3.6 V. |
| 28 | AGND | power_in | Analog ground. |
| 29 | VIN+ | power_in | Analog input pin (+) of the differential sample-and-hold input. |
| 30 | VIN- | power_in | Analog input pin (-) of the differential sample-and-hold input. |
| 31 | AGND | power_in | Analog ground. |
| 32 | AVDD | power_in | Analog power supply, specified 2.7 V to 3.6 V. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | LFCSP-32(5x5) |
| Category | ADC/DAC/Data Conversion |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resolution | 14 | Bits | AD9245BCP-20 | 3 | |||
| Offset Error | 0.3 | 1.6 | % FSR | typ ±0.30, max ±1.60 | 3 | ||
| Gain Error | 0.3 | 3.25 | % FSR | typ ±0.30, max ±3.25; fixed 1.0 V external reference | 3 | ||
| Differential Nonlinearity | DNL | 0.5 | 1 | LSB | typ ±0.50, max ±1.00 | 3 | |
| Integral Nonlinearity | INL | 1.2 | 3.1 | LSB | typ ±1.20, max ±3.10 | 3 | |
| Output Voltage Error (1 V Mode) | 5 | 35 | mV | typ ±5, max ±35 | 3 | ||
| AVDD supply voltage | AVDD | 2.7 | 3 | 3.6 | V | 3 | |
| DRVDD supply voltage | DRVDD | 2.25 | 3 | 3.6 | V | 3 | |
| Power Consumption, Sine Wave Input | 95 | 120 | mW | Measured at maximum clock rate, low input frequency, full-scale sine wave, ~5 pF load on each output bit | 3 | ||
| Maximum Conversion Rate | 20 | MSPS | 8 | ||||
| Minimum Conversion Rate | 1 | MSPS | 8 | ||||
| CLK Period | 50 | ns | 8 | ||||
| CLK Pulse Width High | 15 | ns | DCS function not applicable to the -20 grade | 8 | |||
| CLK Pulse Width Low | 15 | ns | DCS function not applicable to the -20 grade | 8 | |||
| AVDD to AGND | AVDD | -0.3 | 3.9 | V | 9 | ||
| DRVDD to DGND | DRVDD | -0.3 | 3.9 | V | 9 | ||
| AGND to DGND | -0.3 | 0.3 | V | 9 | |||
| AVDD to DRVDD | -3.9 | 3.9 | V | 9 | |||
| D0 to D13 to DGND | -0.3 | V | max DRVDD + 0.3 V | 9 | |||
| CLK, MODE to AGND | -0.3 | V | max AVDD + 0.3 V | 9 | |||
| VIN+, VIN- to AGND | -0.3 | V | max AVDD + 0.3 V | 9 | |||
| VREF, SENSE, REFT, REFB, PDWN to AGND | -0.3 | V | max AVDD + 0.3 V | 9 | |||
| Storage Temperature Range | -65 | 125 | °C | 9 | |||
| Operating Temperature Range | -40 | 85 | °C | 9 | |||
| Lead Temperature | 300 | °C | Soldering 10 sec | 9 | |||
| Junction Temperature | 150 | °C | 9 | ||||
| Thermal resistance junction-to-ambient | θJA | 32.5 | °C/W | 32-Lead LFCSP, 4-layer board, still air | 9 | ||
| Thermal resistance junction-to-case | θJC | 32.71 | °C/W | 32-Lead LFCSP | 9 | ||
| Offset Error Temperature Drift | 2 | ppm/°C | typ ±2 | 3 | |||
| Gain Error Temperature Drift | 12 | ppm/°C | typ ±12 | 3 | |||
| Load Regulation (1 V mode) | 0.8 | mV | @ 1.0 mA | 3 | |||
| Output Voltage Error (0.5 V Mode) | 2.5 | mV | typ ±2.5 | 3 | |||
| Input Referred Noise | 1.08 | LSB rms | VREF = 1.0 V | 3 | |||
| Input Capacitance | 7 | pF | Between one differential input pin and AGND | 3 | |||
| Reference Input Resistance | 7 | kΩ | 3 | ||||
| Supply Current IAVDD | IAVDD | 30 | mA | Maximum clock rate, low input frequency, full-scale sine wave | 3 | ||
| Supply Current IDRVDD | IDRVDD | 2 | mA | Maximum clock rate, low input frequency, full-scale sine wave | 3 | ||
| Power Consumption, DC Input | 90 | mW | DC input at maximum clock rate | 3 | |||
| Standby Power | 1 | mW | DC input, CLK pin inactive | 3 | |||
| Output Delay | tPD | 3.5 | ns | CLK 50% to DATA 50%, 5 pF load on each output | 8 | ||
| Pipeline Delay (Latency) | 7 | Cycles | 8 | ||||
| Aperture Delay | tA | 1 | ns | 8 | |||
| Aperture Uncertainty Jitter | tJ | 0.5 | ps rms | 8 | |||
| Wake-Up Time | 3 | ms | 0.1 μF and 10 μF capacitors on REFT and REFB | 8 | |||
| Out-of-Range Recovery Time | 1 | Cycles | 8 |
CAD (KiCad official)
- Symbol:
AD9245BCPZRL7-20 - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: LFCSP-32(5x5), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ad9245bcpzrl7-20-etched.step/ad9245bcpzrl7-20-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad9245bcpzrl7-20.step/ad9245bcpzrl7-20.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (32 pp, sha256
8fa61d01efdba4ad, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).