Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

AD9235BCPZ-20

Analog Devices · Analog To Digital Converters (ADCs) · LFCSP-32(5x5)

AD9235BCPZ-20 from Analog Devices, in a LFCSP-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DNC unconnected Do Not Connect pin; the datasheet specifies it must not be connected.
2 CLK input Single-ended clock input that controls all internal conversion cycles, with absolute maximum range AGND -0.3 V to AVDD + 0.3 V.
3 DNC unconnected Do Not Connect pin; the datasheet specifies it must not be connected.
4 PDWN input Power-down function selection, active high, with absolute maximum range AGND -0.3 V to AVDD + 0.3 V.
5 DNC unconnected Do Not Connect pin; the datasheet specifies it must not be connected.
6 DNC unconnected Do Not Connect pin; the datasheet specifies it must not be connected.
7 D0 (LSB) output Data output bit 0, the least significant bit; digital outputs are limited to DGND -0.3 V to DRVDD + 0.3 V.
8 D1 output Data output bit 1; digital outputs are limited to DGND -0.3 V to DRVDD + 0.3 V.
9 D2 output Data output bit 2; digital outputs are limited to DGND -0.3 V to DRVDD + 0.3 V.
10 D3 output Data output bit 3; digital outputs are limited to DGND -0.3 V to DRVDD + 0.3 V.
11 D4 output Data output bit 4; digital outputs are limited to DGND -0.3 V to DRVDD + 0.3 V.
12 D5 output Data output bit 5; digital outputs are limited to DGND -0.3 V to DRVDD + 0.3 V.
13 D6 output Data output bit 6; digital outputs are limited to DGND -0.3 V to DRVDD + 0.3 V.
14 D7 output Data output bit 7; digital outputs are limited to DGND -0.3 V to DRVDD + 0.3 V.
15 DGND power_in Digital output ground.
16 DRVDD power_in Digital output driver supply, 2.25 V to 3.6 V per the DC specifications; must be decoupled to DGND with at least 0.1 µF, with 0.1 µF in parallel with 10 µF recommended.
17 D8 output Data output bit 8; digital outputs are limited to DGND -0.3 V to DRVDD + 0.3 V.
18 D9 output Data output bit 9; digital outputs are limited to DGND -0.3 V to DRVDD + 0.3 V.
19 D10 output Data output bit 10; digital outputs are limited to DGND -0.3 V to DRVDD + 0.3 V.
20 D11 (MSB) output Data output bit 11, the most significant bit; digital outputs are limited to DGND -0.3 V to DRVDD + 0.3 V.
21 OTR output Out-of-range indicator that signals an overflow condition and, with the MSB, determines low or high overflow.
22 MODE input Data format and clock duty cycle stabilizer (DCS) mode selection, with absolute maximum range AGND -0.3 V to AVDD + 0.3 V.
23 SENSE input Reference mode selection, with absolute maximum range AGND -0.3 V to AVDD + 0.3 V.
24 VREF power_in Voltage reference input/output, with absolute maximum range AGND -0.3 V to AVDD + 0.3 V and reference input resistance of 7 kΩ.
25 REFB passive Differential reference (-) node, with absolute maximum range AGND -0.3 V to AVDD + 0.3 V.
26 REFT passive Differential reference (+) node, with absolute maximum range AGND -0.3 V to AVDD + 0.3 V.
27 AVDD power_in Analog power supply, 2.7 V to 3.6 V per the DC specifications; absolute maximum AVDD to AGND is -0.3 V to +3.9 V.
28 AGND power_in Analog ground.
29 VIN+ power_in Analog differential input pin (+), with absolute maximum range AGND -0.3 V to AVDD + 0.3 V.
30 VIN- power_in Analog differential input pin (-), with absolute maximum range AGND -0.3 V to AVDD + 0.3 V.
31 AGND power_in Analog ground.
32 AVDD power_in Analog power supply, 2.7 V to 3.6 V per the DC specifications; absolute maximum AVDD to AGND is -0.3 V to +3.9 V.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Analog Devices
Package LFCSP-32(5x5)
Category ADC/DAC/Data Conversion
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Offset error -1.2 0.3 1.2 % FSR Full temp range (TMIN to TMAX) 3
Gain error -2.4 0.3 2.4 % FSR Full temp range (TMIN to TMAX); ADC only, fixed 1.0 V external reference 3
Differential nonlinearity (DNL) -0.65 0.35 0.65 LSB Full temp range (TMIN to TMAX) 3
Integral nonlinearity (INL) -0.8 0.45 0.8 LSB Full temp range (TMIN to TMAX) 3
Offset error temperature drift -2 2 2 ppm/°C Full temp range (TMIN to TMAX) 3
Gain error temperature drift -12 12 12 ppm/°C Full temp range (TMIN to TMAX) 3
Output voltage error (1 V mode) -35 5 35 mV Full temp range (TMIN to TMAX); 1 V internal reference mode 3
Output voltage error (0.5 V mode) -2.5 2.5 mV Full temp range (TMIN to TMAX); 0.5 V internal reference mode 3
Power supply rejection ratio (PSRR) -0.01 0.01 % FSR Full temp range (TMIN to TMAX) 3
Analog supply voltage AVDD 2.7 3 3.6 V Full temp range (TMIN to TMAX) 3
Digital output driver supply voltage DRVDD 2.25 3 3.6 V Full temp range (TMIN to TMAX) 3
Sine wave input power consumption 95 110 mW Sine wave input at max clock rate, fIN = 2.4 MHz, full-scale, ~5 pF load per output bit 3
High level input voltage 2 V Full temp range (TMIN to TMAX) 4
Low level input voltage 0.8 V Full temp range (TMIN to TMAX) 4
High level input current -10 10 µA Full temp range (TMIN to TMAX) 4
Low level input current -10 10 µA Full temp range (TMIN to TMAX) 4
High-level output voltage 3.29 V DRVDD = 3.3 V, IOH = 50 µA; 5 pF load on each output 4
High-level output voltage 3.25 V DRVDD = 3.3 V, IOH = 0.5 mA; 5 pF load on each output 4
Low-level output voltage 0.2 V DRVDD = 3.3 V, IOL = 1.6 mA; 5 pF load on each output 4
Low-level output voltage 0.05 V DRVDD = 3.3 V, IOL = 50 µA; 5 pF load on each output 4
High-level output voltage 2.49 V DRVDD = 2.5 V, IOH = 50 µA; 5 pF load on each output 4
High-level output voltage 2.45 V DRVDD = 2.5 V, IOH = 0.5 mA; 5 pF load on each output 4
Maximum conversion rate 20 MSPS Full temp range (TMIN to TMAX) 4
CLK pulse width high 15 ns Full temp range; footnote 1 DCS condition applies to AD9235-65 only 4
CLK pulse width low 15 ns Full temp range; footnote 1 DCS condition applies to AD9235-65 only 4
AVDD to AGND -0.3 3.9 V 7
DRVDD to DGND -0.3 3.9 V 7
AGND to DGND -0.3 0.3 V 7
AVDD to DRVDD -3.9 3.9 V 7
Digital outputs to DGND -0.3 V Upper limit printed as DRVDD + 0.3 V 7
CLK, MODE to AGND -0.3 V Upper limit printed as AVDD + 0.3 V 7
VIN+, VIN- to AGND -0.3 V Upper limit printed as AVDD + 0.3 V 7
VREF, SENSE to AGND -0.3 V Upper limit printed as AVDD + 0.3 V 7
REFB, REFT to AGND -0.3 V Upper limit printed as AVDD + 0.3 V 7
PDWN to AGND -0.3 V Upper limit printed as AVDD + 0.3 V 7
Operating temperature -40 85 °C 7
Junction temperature 150 °C 7
Lead temperature (10 sec) 300 °C 10 s soldering 7
Storage temperature -65 150 °C 7
Thermal resistance, junction-to-ambient (θJA) θJA 32.5 °C/W 32-lead LFCSP, typical; 4-layer board, still air, EIA/JESD51-1 7
Thermal resistance, junction-to-case (θJC) θJC 32.71 °C/W 32-lead LFCSP, typical; 4-layer board, still air, EIA/JESD51-1 7

CAD (KiCad official)

  • Symbol: AD9235BCPZ-20
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: LFCSP-32(5x5), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ad9235bcpz-20-etched.step / ad9235bcpz-20-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad9235bcpz-20.step / ad9235bcpz-20.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (40 pp, sha256 88e1c7b0b3811b67, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF