main
Ray
Publish 0.1.0
ab9f503
AD9201ARSZ
Analog Devices · Pre-ordered Chips · SSOP-28-208mil
AD9201ARSZ from Analog Devices, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DVSS | power_in | Digital ground. |
| 2 | DVDD | power_in | Digital supply for the output drivers, operable from 2.7 V to 5.5 V independent of the analog supply. |
| 3 | D0 | tri_state | Bit 0 (LSB) of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high. |
| 4 | D1 | tri_state | Bit 1 of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high. |
| 5 | D2 | tri_state | Bit 2 of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high. |
| 6 | D3 | tri_state | Bit 3 of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high. |
| 7 | D4 | tri_state | Bit 4 of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high. |
| 8 | D5 | tri_state | Bit 5 of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high. |
| 9 | D6 | tri_state | Bit 6 of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high. |
| 10 | D7 | tri_state | Bit 7 of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high. |
| 11 | D8 | tri_state | Bit 8 of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high. |
| 12 | D9 | tri_state | Bit 9 (MSB) of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high. |
| 13 | SELECT | input | Output mux select: high outputs I channel, low outputs Q channel. |
| 14 | CLOCK | input | Clock input; both ADCs sample on the rising edge, and the input is limited to AVSS-0.3 V to AVDD+0.3 V. |
| 15 | SLEEP | input | Power-down control: high powers down, low is normal operation. |
| 16 | INA-I | input | I channel analog input A, buffered, with absolute maximum range of AVSS-1.0 V to AVDD+0.3 V. |
| 17 | INB-I | input | I channel analog input B, buffered, with absolute maximum range of AVSS-1.0 V to AVDD+0.3 V. |
| 18 | REFT-I | passive | Top reference decoupling pin for the I channel. |
| 19 | REFB-I | passive | Bottom reference decoupling pin for the I channel. |
| 20 | AVSS | power_in | Analog ground. |
| 21 | REFSENSE | input | Reference select: tie to VREF for 1 V span, AVSS for 2 V span, resistor divider tap for programmable reference, or AVDD for external reference. |
| 22 | VREF | power_in | Internal reference output (or external reference input when REFSENSE is tied to AVDD), range AVSS-0.3 V to AVDD+0.3 V. |
| 23 | AVDD | power_in | Analog supply, operable from 2.7 V to 5.5 V. |
| 24 | REFB-Q | passive | Bottom reference decoupling pin for the Q channel. |
| 25 | REFT-Q | passive | Top reference decoupling pin for the Q channel. |
| 26 | INB-Q | input | Q channel analog input B, buffered, with absolute maximum range of AVSS-1.0 V to AVDD+0.3 V. |
| 27 | INA-Q | input | Q channel analog input A, buffered, with absolute maximum range of AVSS-1.0 V to AVDD+0.3 V. |
| 28 | CHIP-SELECT | input | Output enable: high puts the outputs in high impedance, low is normal operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SSOP-28-208mil |
| Category | Interface ICs |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage AVDD | AVDD | 2.7 | 3 | 5.5 | V | AVDD, DVDD ≤ 2.3 V | 2 |
| Operating Voltage DRVDD | DRVDD | 2.7 | 3 | 5.5 | V | 2 | |
| Power Consumption | PD | 215 | 245 | mW | AVDD = DVDD = 3 V | 2 | |
| Differential Nonlinearity (SE) | DNL | 0.5 | 1 | LSB | REFT = 1 V, REFB = 0 V | 2 | |
| Integral Nonlinearity (SE) | INL | 1.5 | 2.5 | LSB | 2 | ||
| Zero-Scale Error, Offset Error | EZS | 1.5 | 3.8 | % FS | 2 | ||
| Full-Scale Error, Gain Error | EFS | 3.5 | 5.4 | % FS | 2 | ||
| Power Supply Rejection | PSR | 0.8 | 1.3 | % FS | 2 | ||
| Signal-to-Noise and Distortion | SINAD | 55.6 | 57.3 | dB | f = 3.58 MHz | 2 | |
| Signal-to-Noise | SNR | 55.9 | 57.8 | dB | f = 3.58 MHz | 2 | |
| Total Harmonic Distortion | THD | -69 | -63.3 | dB | f = 3.58 MHz | 2 | |
| Spurious Free Dynamic Range | SFDR | -73 | -66 | dB | f = 3.58 MHz | 2 | |
| High Input Voltage | VIH | 2.4 | V | 3 | |||
| Low Input Voltage | VIL | 0.3 | V | 3 | |||
| DC Leakage Current | IIN | 6 | µA | 3 | |||
| High Level Output Voltage (DVDD = 3 V) | VOH | 2.88 | V | IOH = 50 µA | 3 | ||
| Low Level Output Voltage (DVDD = 3 V) | VOL | 0.095 | V | IOL = 1.5 mA | 3 | ||
| High Level Output Voltage (DVDD = 5 V) | VOH | 4.5 | V | IOH = 50 µA | 3 | ||
| Low Level Output Voltage (DVDD = 5 V) | VOL | 0.4 | V | IOL = 1.5 mA | 3 | ||
| Data Valid Delay | tOD | 11 | ns | 3 | |||
| MUX Select Delay | tMD | 7 | ns | 3 | |||
| Data Enable Delay | tED | 13 | ns | CL = 20 pF. Output Level to 90% of Final Value | 3 | ||
| Data High-Z Delay | tDHZ | 13 | ns | CL = 20 pF. Output Level to 90% of Final Value | 3 | ||
| Clock Pulsewidth High | tCH | 22.5 | ns | 3 | |||
| Clock Pulsewidth Low | tCL | 22.5 | ns | 3 | |||
| AVDD to AVSS | AVDD | -0.3 | 6.5 | V | With respect to AVSS | 4 | |
| DVDD to DVSS | DVDD | -0.3 | 6.5 | V | With respect to DVSS | 4 | |
| AVSS to DVSS | AVSS | -0.3 | 0.3 | V | With respect to DVSS | 4 | |
| AVDD to DVDD | AVDD | -6.5 | 6.5 | V | With respect to DVDD | 4 | |
| CLK | CLK | -0.3 | V | With respect to AVSS; max AVDD + 0.3 V | 4 | ||
| Digital Outputs | -0.3 | V | With respect to DVSS; max DVDD + 0.3 V | 4 | |||
| AINA, AINB | -1 | V | With respect to AVSS; max AVDD + 0.3 V | 4 | |||
| VREF | VREF | -0.3 | V | With respect to AVSS; max AVDD + 0.3 V | 4 | ||
| REFSENSE | -0.3 | V | With respect to AVSS; max AVDD + 0.3 V | 4 | |||
| REFT, REFB | -0.3 | V | With respect to AVSS; max AVDD + 0.3 V | 4 | |||
| Junction Temperature | 150 | °C | 4 | ||||
| Storage Temperature | -65 | 150 | °C | 4 | |||
| Lead Temperature | 300 | °C | 10 sec | 4 | |||
| Operating Temperature Range | -40 | 85 | °C | AD9201ARS | 4 | ||
| Resolution | 10 | Bits | 2 | ||||
| Conversion Rate | FS | 20 | MHz | 2 | |||
| Differential Nonlinearity | DNL | 0.4 | LSB | REFT = 1 V, REFB = 0 V | 2 | ||
| Output Voltage Tolerance (1 V Mode) | -10 | 10 | mV | REFSENSE = VREF | 2 | ||
| Output Voltage Tolerance (2 V Mode) | -15 | 15 | mV | REFSENSE = GND | 2 |
CAD (KiCad official)
- Symbol:
AD9201ARSZ - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
ad9201arsz-etched.step/ad9201arsz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad9201arsz.step/ad9201arsz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
7307385eeac3f8a9, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AD9201ARSZ
**Analog Devices** · Pre-ordered Chips · SSOP-28-208mil
AD9201ARSZ from Analog Devices, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DVSS | power_in | Digital ground. |
| 2 | DVDD | power_in | Digital supply for the output drivers, operable from 2.7 V to 5.5 V independent of the analog supply. |
| 3 | D0 | tri_state | Bit 0 (LSB) of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high. |
| 4 | D1 | tri_state | Bit 1 of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high. |
| 5 | D2 | tri_state | Bit 2 of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high. |
| 6 | D3 | tri_state | Bit 3 of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high. |
| 7 | D4 | tri_state | Bit 4 of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high. |
| 8 | D5 | tri_state | Bit 5 of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high. |
| 9 | D6 | tri_state | Bit 6 of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high. |
| 10 | D7 | tri_state | Bit 7 of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high. |
| 11 | D8 | tri_state | Bit 8 of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high. |
| 12 | D9 | tri_state | Bit 9 (MSB) of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high. |
| 13 | SELECT | input | Output mux select: high outputs I channel, low outputs Q channel. |
| 14 | CLOCK | input | Clock input; both ADCs sample on the rising edge, and the input is limited to AVSS-0.3 V to AVDD+0.3 V. |
| 15 | SLEEP | input | Power-down control: high powers down, low is normal operation. |
| 16 | INA-I | input | I channel analog input A, buffered, with absolute maximum range of AVSS-1.0 V to AVDD+0.3 V. |
| 17 | INB-I | input | I channel analog input B, buffered, with absolute maximum range of AVSS-1.0 V to AVDD+0.3 V. |
| 18 | REFT-I | passive | Top reference decoupling pin for the I channel. |
| 19 | REFB-I | passive | Bottom reference decoupling pin for the I channel. |
| 20 | AVSS | power_in | Analog ground. |
| 21 | REFSENSE | input | Reference select: tie to VREF for 1 V span, AVSS for 2 V span, resistor divider tap for programmable reference, or AVDD for external reference. |
| 22 | VREF | power_in | Internal reference output (or external reference input when REFSENSE is tied to AVDD), range AVSS-0.3 V to AVDD+0.3 V. |
| 23 | AVDD | power_in | Analog supply, operable from 2.7 V to 5.5 V. |
| 24 | REFB-Q | passive | Bottom reference decoupling pin for the Q channel. |
| 25 | REFT-Q | passive | Top reference decoupling pin for the Q channel. |
| 26 | INB-Q | input | Q channel analog input B, buffered, with absolute maximum range of AVSS-1.0 V to AVDD+0.3 V. |
| 27 | INA-Q | input | Q channel analog input A, buffered, with absolute maximum range of AVSS-1.0 V to AVDD+0.3 V. |
| 28 | CHIP-SELECT | input | Output enable: high puts the outputs in high impedance, low is normal operation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SSOP-28-208mil |
| Category | Interface ICs |
| Pins | 28 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage AVDD | AVDD | 2.7 | 3 | 5.5 | V | AVDD, DVDD ≤ 2.3 V | 2 |
| Operating Voltage DRVDD | DRVDD | 2.7 | 3 | 5.5 | V | | 2 |
| Power Consumption | PD | | 215 | 245 | mW | AVDD = DVDD = 3 V | 2 |
| Differential Nonlinearity (SE) | DNL | | 0.5 | 1 | LSB | REFT = 1 V, REFB = 0 V | 2 |
| Integral Nonlinearity (SE) | INL | | 1.5 | 2.5 | LSB | | 2 |
| Zero-Scale Error, Offset Error | EZS | | 1.5 | 3.8 | % FS | | 2 |
| Full-Scale Error, Gain Error | EFS | | 3.5 | 5.4 | % FS | | 2 |
| Power Supply Rejection | PSR | | 0.8 | 1.3 | % FS | | 2 |
| Signal-to-Noise and Distortion | SINAD | 55.6 | 57.3 | | dB | f = 3.58 MHz | 2 |
| Signal-to-Noise | SNR | 55.9 | 57.8 | | dB | f = 3.58 MHz | 2 |
| Total Harmonic Distortion | THD | | -69 | -63.3 | dB | f = 3.58 MHz | 2 |
| Spurious Free Dynamic Range | SFDR | | -73 | -66 | dB | f = 3.58 MHz | 2 |
| High Input Voltage | VIH | 2.4 | | | V | | 3 |
| Low Input Voltage | VIL | | | 0.3 | V | | 3 |
| DC Leakage Current | IIN | | | 6 | µA | | 3 |
| High Level Output Voltage (DVDD = 3 V) | VOH | 2.88 | | | V | IOH = 50 µA | 3 |
| Low Level Output Voltage (DVDD = 3 V) | VOL | | | 0.095 | V | IOL = 1.5 mA | 3 |
| High Level Output Voltage (DVDD = 5 V) | VOH | 4.5 | | | V | IOH = 50 µA | 3 |
| Low Level Output Voltage (DVDD = 5 V) | VOL | | | 0.4 | V | IOL = 1.5 mA | 3 |
| Data Valid Delay | tOD | | | 11 | ns | | 3 |
| MUX Select Delay | tMD | | | 7 | ns | | 3 |
| Data Enable Delay | tED | | | 13 | ns | CL = 20 pF. Output Level to 90% of Final Value | 3 |
| Data High-Z Delay | tDHZ | | | 13 | ns | CL = 20 pF. Output Level to 90% of Final Value | 3 |
| Clock Pulsewidth High | tCH | 22.5 | | | ns | | 3 |
| Clock Pulsewidth Low | tCL | 22.5 | | | ns | | 3 |
| AVDD to AVSS | AVDD | -0.3 | | 6.5 | V | With respect to AVSS | 4 |
| DVDD to DVSS | DVDD | -0.3 | | 6.5 | V | With respect to DVSS | 4 |
| AVSS to DVSS | AVSS | -0.3 | | 0.3 | V | With respect to DVSS | 4 |
| AVDD to DVDD | AVDD | -6.5 | | 6.5 | V | With respect to DVDD | 4 |
| CLK | CLK | -0.3 | | | V | With respect to AVSS; max AVDD + 0.3 V | 4 |
| Digital Outputs | | -0.3 | | | V | With respect to DVSS; max DVDD + 0.3 V | 4 |
| AINA, AINB | | -1 | | | V | With respect to AVSS; max AVDD + 0.3 V | 4 |
| VREF | VREF | -0.3 | | | V | With respect to AVSS; max AVDD + 0.3 V | 4 |
| REFSENSE | | -0.3 | | | V | With respect to AVSS; max AVDD + 0.3 V | 4 |
| REFT, REFB | | -0.3 | | | V | With respect to AVSS; max AVDD + 0.3 V | 4 |
| Junction Temperature | | | | 150 | °C | | 4 |
| Storage Temperature | | -65 | | 150 | °C | | 4 |
| Lead Temperature | | | | 300 | °C | 10 sec | 4 |
| Operating Temperature Range | | -40 | | 85 | °C | AD9201ARS | 4 |
| Resolution | | | 10 | | Bits | | 2 |
| Conversion Rate | FS | | | 20 | MHz | | 2 |
| Differential Nonlinearity | DNL | | 0.4 | | LSB | REFT = 1 V, REFB = 0 V | 2 |
| Output Voltage Tolerance (1 V Mode) | | -10 | | 10 | mV | REFSENSE = VREF | 2 |
| Output Voltage Tolerance (2 V Mode) | | -15 | | 15 | mV | REFSENSE = GND | 2 |
## CAD (KiCad official)
- Symbol: `AD9201ARSZ`
- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`
- 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files: `ad9201arsz-etched.step` / `ad9201arsz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ad9201arsz.step` / `ad9201arsz.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/AD9201.pdf) (20 pp, sha256 `7307385eeac3f8a9`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ad9201arsz-datasheet.pdf)