Generated by kicad-footprint-generator · KiCad file format 20260206
AD9200ARSZ
Analog Devices · Analog To Digital Converters (ADCs) · SSOP-28-208mil
AD9200ARSZ from Analog Devices, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AVSS | power_in | Analog ground for the AD9200 analog circuitry; the datasheet gives no separate voltage limit for this pin beyond the absolute maximum AVSS-to-DRVSS difference of ±0.3 V. |
| 2 | DRVDD | power_in | Digital driver supply that powers the D0-D9 output buffers separately from AVDD, with the datasheet showing operation at DRVDD = 3 V and 5 V and absolute maximum DRVDD-to-DRVSS of -0.3 V to +6.5 V. |
| 3 | D0 | tri_state | Bit 0 (least significant bit) of the straight-binary data output, which goes high-impedance when THREE-STATE is set HI and is recommended to drive a fan-out of one with load below 20 pF. |
| 4 | D1 | tri_state | Bit 1 of the straight-binary data output, which goes high-impedance when THREE-STATE is set HI and is recommended to drive a fan-out of one with load below 20 pF. |
| 5 | D2 | tri_state | Bit 2 of the straight-binary data output, which goes high-impedance when THREE-STATE is set HI and is recommended to drive a fan-out of one with load below 20 pF. |
| 6 | D3 | tri_state | Bit 3 of the straight-binary data output, which goes high-impedance when THREE-STATE is set HI and is recommended to drive a fan-out of one with load below 20 pF. |
| 7 | D4 | tri_state | Bit 4 of the straight-binary data output, which goes high-impedance when THREE-STATE is set HI and is recommended to drive a fan-out of one with load below 20 pF. |
| 8 | D5 | tri_state | Bit 5 of the straight-binary data output, which goes high-impedance when THREE-STATE is set HI and is recommended to drive a fan-out of one with load below 20 pF. |
| 9 | D6 | tri_state | Bit 6 of the straight-binary data output, which goes high-impedance when THREE-STATE is set HI and is recommended to drive a fan-out of one with load below 20 pF. |
| 10 | D7 | tri_state | Bit 7 of the straight-binary data output, which goes high-impedance when THREE-STATE is set HI and is recommended to drive a fan-out of one with load below 20 pF. |
| 11 | D8 | tri_state | Bit 8 of the straight-binary data output, which goes high-impedance when THREE-STATE is set HI and is recommended to drive a fan-out of one with load below 20 pF. |
| 12 | D9 | tri_state | Bit 9 (most significant bit) of the straight-binary data output, which goes high-impedance when THREE-STATE is set HI and is recommended to drive a fan-out of one with load below 20 pF. |
| 13 | OTR | output | Out-of-range indicator that flags when the input is beyond the input range and can be used with the MSB to determine low or high overflow. |
| 14 | DRVSS | power_in | Digital ground for the output driver circuitry, to be kept separate from analog ground and joined to it directly under the device in a solid ground plane. |
| 15 | CLK | input | Single clock input that controls all internal conversion cycles, referenced to analog ground with a logic threshold nominally at AVDD/2 and designed for 20 MSPS operation. |
| 16 | THREE-STATE | input | Output enable: HI places data outputs D0-D9 in high-impedance state, LO selects normal operation. |
| 17 | STBY | input | Power-down control: HI puts the device in power-down (sleep) mode, reducing static power below 5 mW with the clock disabled, and LO selects normal operation. |
| 18 | REFSENSE | input | Reference select pin: tying it to VREF gives a 1 V internal reference, to AVSS gives 2 V, and to AVDD selects external reference mode. |
| 19 | CLAMP | input | Clamp enable: HI enables clamp mode for DC restoration of AC-coupled input, LO disables the clamp. |
| 20 | CLAMPIN | input | Clamp reference input to which a DC level is applied to set the level the AC-coupled analog input is clamped to. |
| 21 | REFTS | input | Top reference input that sets the upper input voltage limit (single-ended input spans REFBS ≤ AIN ≤ REFTS), with the difference between REFTS and REFBS kept between 1 V and 2 V. |
| 22 | REFTF | passive | Top reference decoupling pin that is bypassed to analog ground with 0.1 µF and 10 µF capacitors in the application circuits. |
| 23 | MODE | input | Mode select pin: tying it to AVDD selects top/bottom and single-ended modes, AVDD/2 selects center span or differential mode, and floating or grounding it selects AD876 mode. |
| 24 | REFBF | passive | Bottom reference decoupling pin that is bypassed to analog ground with 0.1 µF and 10 µF capacitors in the application circuits. |
| 25 | REFBS | input | Bottom reference input that sets the lower input voltage limit of the analog input span, typically connected to analog ground in single-ended operation. |
| 26 | VREF | power_in | Internal reference output at 1 V or 2 V depending on REFSENSE strapping, which can alternatively be driven by an external reference in external reference mode. |
| 27 | AIN | input | Analog signal input to the sample-and-hold amplifier, which must be driven within AVSS-0.3 V to AVDD+0.3 V per the absolute maximum ratings. |
| 28 | AVDD | power_in | Analog supply for the AD9200 core, operating from 2.7 V to 5.5 V with absolute maximum AVDD-to-AVSS of -0.3 V to +6.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SSOP-28-208mil |
| Category | ADC/DAC/Data Conversion |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Differential Nonlinearity | DNL | 0.5 | 1 | LSB | REFTS = 2.5 V, REFBS = 0.5 V | 2 | |
| Integral Nonlinearity | INL | 0.75 | 2 | LSB | 2 | ||
| Offset Error | EZS | 0.4 | 1.2 | % FSR | 2 | ||
| Gain Error | EFS | 1.4 | 3.5 | % FSR | 2 | ||
| Top Reference Voltage | REFTS | 1 | V | Max printed as AVDD | 2 | ||
| Output Voltage Tolerance (1 V Mode) | -25 | 10 | 25 | mV | 2 | ||
| Load Regulation (1 V Mode) | 0.5 | 2 | mV | 1 mA Load Current | 2 | ||
| Operating Voltage AVDD | AVDD | 2.7 | 3 | 5.5 | V | 2 | |
| Operating Voltage DRVDD | DRVDD | 2.7 | 3 | 5.5 | V | 2 | |
| Supply Current | IAVDD | 26.6 | 33.3 | mA | AVDD = 3 V, MODE = AVSS | 2 | |
| Power Consumption | PD | 80 | 100 | mW | AVDD = DRVDD = 3 V, MODE = AVSS | 2 | |
| Signal-to-Noise and Distortion | SINAD | 54.5 | 57 | dB | f = 3.58 MHz | 2 | |
| Signal-to-Noise | SNR | 55 | 57 | dB | f = 3.58 MHz | 2 | |
| Total Harmonic Distortion | THD | -66 | -59 | dB | f = 3.58 MHz | 2 | |
| Spurious Free Dynamic Range | SFDR | -69 | -61 | dB | f = 3.58 MHz | 2 | |
| High Input Voltage | VIH | 2.4 | V | 3 | |||
| Low Input Voltage | VIL | 0.3 | V | 3 | |||
| High-Z Leakage | IOZ | -10 | 10 | µA | Output = GND to VDD | 3 | |
| Data Valid Delay | tOD | 25 | ns | CL = 20 pF | 3 | ||
| Data Enable Delay | tDEN | 25 | ns | 3 | |||
| Data High-Z Delay | tDHZ | 13 | ns | 3 | |||
| High Level Output Voltage (DRVDD = 3 V) | VOH | 2.95 | V | IOH = 50 µA | 3 | ||
| High Level Output Voltage (DRVDD = 3 V) | VOH | 2.8 | V | IOH = 0.5 mA | 3 | ||
| Low Level Output Voltage (DRVDD = 3 V) | VOL | 0.4 | V | IOL = 1.6 mA | 3 | ||
| Low Level Output Voltage (DRVDD = 3 V) | VOL | 0.05 | V | IOL = 50 µA | 3 | ||
| High Level Output Voltage (DRVDD = 5 V) | VOH | 4.5 | V | IOH = 50 µA | 3 | ||
| High Level Output Voltage (DRVDD = 5 V) | VOH | 2.4 | V | IOH = 0.5 mA | 3 | ||
| Low Level Output Voltage (DRVDD = 5 V) | VOL | 0.4 | V | IOL = 1.6 mA | 3 | ||
| Low Level Output Voltage (DRVDD = 5 V) | VOL | 0.1 | V | IOL = 50 µA | 3 | ||
| Clock Pulsewidth High | tCH | 22.5 | ns | 3 | |||
| Clock Pulsewidth Low | tCL | 22.5 | ns | 3 | |||
| Clamp Error Voltage | EOC | -40 | 20 | 40 | mV | CLAMPIN = 0.5 V-2.7 V, RIN = 10 Ω | 3 |
| AVDD to AVSS | -0.3 | 6.5 | V | With respect to AVSS | 4 | ||
| DRVDD to DRVSS | -0.3 | 6.5 | V | With respect to DRVSS | 4 | ||
| AVSS to DRVSS | -0.3 | 0.3 | V | With respect to DRVSS | 4 | ||
| AVDD to DRVDD | -6.5 | 6.5 | V | With respect to DRVDD | 4 | ||
| MODE | -0.3 | V | With respect to AVSS; max printed as AVDD + 0.3 | 4 | |||
| CLK | -0.3 | V | With respect to AVSS; max printed as AVDD + 0.3 | 4 | |||
| Digital Outputs | -0.3 | V | With respect to DRVSS; max printed as DRVDD + 0.3 | 4 | |||
| AIN | AIN | -0.3 | V | With respect to AVSS; max printed as AVDD + 0.3 | 4 | ||
| VREF | VREF | -0.3 | V | With respect to AVSS; max printed as AVDD + 0.3 | 4 | ||
| REFSENSE | REFSENSE | -0.3 | V | With respect to AVSS; max printed as AVDD + 0.3 | 4 | ||
| REFTF, REFTB | REFTF | -0.3 | V | With respect to AVSS; max printed as AVDD + 0.3 | 4 | ||
| REFTS, REFBS | REFTS | -0.3 | V | With respect to AVSS; max printed as AVDD + 0.3 | 4 | ||
| Junction Temperature | 150 | °C | 4 | ||||
| Storage Temperature | -65 | 150 | °C | 4 | |||
| Lead Temperature | 300 | °C | 10 sec | 4 | |||
| Operating Temperature Range (industrial, AD9200ARS) | -40 | 85 | °C | Ordering guide entry for AD9200ARS | 4 |
CAD (KiCad official)
- Symbol:
AD9200ARSZ - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
ad9200arsz-etched.step/ad9200arsz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad9200arsz.step/ad9200arsz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
0b995b511369ce51, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).