← Commit history
Publish 0.1.2
5 files changed
+173−178
README.md+74−79@@ -2,32 +2,32 @@ **Analog Devices** · Analog To Digital Converters (ADCs) · SSOP-20-208mil -AD9057BRSZ-80 from Analog Devices, in a SSOP-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.+AD9057BRSZ-80 from Analog Devices, in a SSOP-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD. ## Pinout | Pin | Name | Type | Function | |---|---|---|---|-| 1 | PWRDN | input | Power-down select: logic high puts the ADC into power-down mode and drives the digital outputs to high impedance, and Pin 1 should be tied to ground if power-down is not used. |-| 2 | VREF OUT | power_in | Internal 2.5 V (typ) reference output that should be bypassed with 0.1 µF to ground and can provide 300 mA of drive current for DC biasing. |-| 3 | VREF IN | power_in | Reference input for the ADC at 2.5 V typical (±10%), which can be driven by an external reference with VREF OUT disconnected. |-| 4 | GND | power_in | Analog and digital ground. |-| 5 | VD | power_in | Analog 5 V power supply for the ADC (VD = 5 V ±5% in the stated test conditions). |-| 6 | BIAS OUT | output | Bias pin for AC coupling, connected to VREF IN through the internal 1 kΩ (±20%) bias resistor. |-| 7 | AIN | input | Single-ended analog input with a 1.0 V p-p input range centered at 2.5 V and 150 kΩ input resistance. |-| 8 | VD | power_in | Analog 5 V power supply for the ADC (second VD pin, same net as Pin 5). |-| 9 | GND | power_in | Analog and digital ground (second GND pin, same net as Pin 4). |-| 10 | ENCODE | input | TTL/CMOS-compatible encode clock; the ADC samples on the rising edge of ENCODE, with encode pulsewidth high and low of at least 5.5 ns at 80 MSPS. |-| 11 | D7 | output | Digital output bit 7, the MSB, in offset binary code; goes to high impedance in power-down mode. |-| 12 | D6 | output | Digital output bit 6 in offset binary code; goes to high impedance in power-down mode. |-| 13 | D5 | output | Digital output bit 5 in offset binary code; goes to high impedance in power-down mode. |-| 14 | D4 | output | Digital output bit 4 in offset binary code; goes to high impedance in power-down mode. |-| 15 | VDD | power_in | Digital output power supply, nominally 3 V to 5 V and isolated from the analog VD supply. |-| 16 | GND | power_in | Ground (third GND pin on the package). |-| 17 | D3 | output | Digital output bit 3 in offset binary code; goes to high impedance in power-down mode. |-| 18 | D2 | output | Digital output bit 2 in offset binary code; goes to high impedance in power-down mode. |-| 19 | D1 | output | Digital output bit 1 in offset binary code; goes to high impedance in power-down mode. |-| 20 | D0 | output | Digital output bit 0, the LSB, in offset binary code; goes to high impedance in power-down mode. |+| 1 | PWRDN | input | Power-down select: logic high puts the ADC into power-down mode and drives the digital outputs to high impedance, and the pin should be tied to ground if power-down is not wanted. |+| 2 | VREF OUT | power_in | Internal 2.5 V (typ) reference output that should be bypassed to ground with 0.1 µF and can supply up to 300 mA of drive current. |+| 3 | VREF IN | power_in | Reference input for the ADC at 2.5 V typ (±10%), which sets the ADC gain and midscale; the datasheet states gain adjustment of up to ±10% with an external reference. |+| 4 | GND | power_in | Analog/digital ground. |+| 5 | VD | power_in | Analog 5 V power supply (specified at VD = 5 V, ±5%, with absolute maximum of 7 V). |+| 6 | BIAS OUT | passive | Bias pin for AC coupling of the analog input, connected internally through a 1 kΩ (±20%) resistor to REF IN. |+| 7 | AIN | input | Single-ended analog input with 1.0 V p-p full-scale range centered at 2.5 V and 150 kΩ input resistance. |+| 8 | VD | power_in | Analog 5 V power supply (second VD pin, same supply as pin 5). |+| 9 | GND | power_in | Analog/digital ground. |+| 10 | ENCODE | input | Single-ended TTL/CMOS encode clock on which the ADC samples on the rising edge, guaranteed for conversion rates from 5 MSPS to 80 MSPS for this grade. |+| 11 | D7 | tri_state | ADC digital output, MSB, offset binary code; goes high impedance in power-down mode. |+| 12 | D6 | tri_state | ADC digital output bit 6, offset binary code; goes high impedance in power-down mode. |+| 13 | D5 | tri_state | ADC digital output bit 5, offset binary code; goes high impedance in power-down mode. |+| 14 | D4 | tri_state | ADC digital output bit 4, offset binary code; goes high impedance in power-down mode. |+| 15 | VDD | power_in | Digital output power supply, nominally 3 V to 5 V, isolated from the analog VD supply to minimize digital noise coupling. |+| 16 | GND | power_in | Analog/digital ground. |+| 17 | D3 | tri_state | ADC digital output bit 3, offset binary code; goes high impedance in power-down mode. |+| 18 | D2 | tri_state | ADC digital output bit 2, offset binary code; goes high impedance in power-down mode. |+| 19 | D1 | tri_state | ADC digital output bit 1, offset binary code; goes high impedance in power-down mode. |+| 20 | D0 | tri_state | ADC digital output LSB, offset binary code; goes high impedance in power-down mode. | ## Key specifications @@ -44,66 +44,61 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Differential Nonlinearity, 25°C | | | 0.75 | 1.9 | LSB | 25°C, test level I | 2 |-| Differential Nonlinearity, full temp | | | | 2 | LSB | Full temp range, test level VI | 2 |-| Integral Nonlinearity, 25°C | | | 0.75 | 1.9 | LSB | 25°C, test level I | 2 |-| Integral Nonlinearity, full temp | | | | 2 | LSB | Full temp range, test level VI | 2 |-| Gain Error, 25°C | | -6 | -2.5 | 6 | % FS | 25°C, test level I; ADC only with fixed 2.5 V external reference (Note 1) | 2 |-| Gain Error, full temp | | -8 | | 8 | % FS | Full temp range, test level VI | 2 |-| Gain Tempco | | -70 | | 70 | ppm/°C | Full temp range, test level V; ±70 printed | 2 |-| Input Offset Voltage, 25°C | | -15 | 0 | 15 | mV | 25°C, test level I | 2 |-| Input Offset Voltage, full temp | | -25 | | 25 | mV | Full temp range, test level VI | 2 |-| Input Bias Current, 25°C | | | 6 | 16 | mA | 25°C, test level I; unit printed as mA | 2 |-| Input Bias Current, full temp | | | | 25 | mA | Full temp range, test level VI; unit printed as mA | 2 |-| Band Gap Reference Output Voltage | | 2.4 | 2.5 | 2.6 | V | Full temp range, test level VI | 2 |-| Band Gap Reference Temperature Coefficient | | -10 | | 10 | ppm/°C | Full temp range, test level V; ±10 printed | 2 |-| Maximum Conversion Rate | | | | 80 | MSPS | Full temp range, test level VI; -80 grade | 2 |-| Minimum Conversion Rate | | 5 | | | MSPS | Full temp range, test level IV | 2 |-| Output Valid Time | tV | 4 | | 6.6 | ns | Full temp range, test level IV; Note 2 | 2 |-| Output Propagation Delay | tPD | 8 | | 11.3 | ns | Full temp range, test level IV; Note 2 | 2 |-| SINAD (With Harmonics), fIN = 10.3 MHz | SINAD | 41.5 | 45 | | dB | fIN = 10.3 MHz, 25°C, test level I; Note 3 | 2 |-| ENOB, fIN = 10.3 MHz | ENOB | 6.6 | 7.2 | | Bits | fIN = 10.3 MHz, 25°C, test level I | 2 |-| SNR (Without Harmonics), fIN = 10.3 MHz | SNR | 42.5 | 46 | | dB | fIN = 10.3 MHz, 25°C, test level I; Note 3 | 2 |-| Second Harmonic Distortion, fIN = 10.3 MHz | | | -62 | -50 | dBc | fIN = 10.3 MHz, 25°C, test level I | 2 |-| Third Harmonic Distortion, fIN = 10.3 MHz | | | -60 | -46 | dBc | fIN = 10.3 MHz, 25°C, test level I | 2 |-| Logic 1 Voltage (digital inputs) | | 2 | | | V | Full temp range, test level VI | 2 |-| Logic 0 Voltage (digital inputs) | | | | 0.8 | V | Full temp range, test level VI | 2 |-| Logic 1 Current | | -1 | | 1 | mA | Full temp range, test level VI; ±1 printed | 2 |-| Logic 0 Current | | -1 | | 1 | mA | Full temp range, test level VI; ±1 printed | 2 |-| Encode Pulsewidth High (tEH) | tEH | 5.5 | | 166 | ns | 25°C, test level IV | 2 |-| Encode Pulsewidth Low (tEL) | tEL | 5.5 | | 166 | ns | 25°C, test level IV | 2 |-| Logic 1 Voltage (VDD = 3 V) | | 2.95 | | | V | VDD = 3 V, full temp range, test level VI | 3 |-| Logic 1 Voltage (VDD = 5 V) | | 4.95 | | | V | VDD = 5 V, full temp range, test level IV | 3 |-| Logic 0 Voltage (digital outputs) | | | | 0.05 | V | Full temp range, test level VI | 3 |-| VD Supply Current (VD = 5 V) | | | 40 | 51 | mA | VD = 5 V, full temp range, test level VI | 3 |-| VDD Supply Current (VDD = 3 V) | | | 7.4 | 8.8 | mA | VDD = 3 V, full temp range, test level VI; Note 4 | 3 |-| Power Dissipation | | | 220 | 281 | mW | Full temp range, test level VI; Note 5 | 3 |-| Power-Down Dissipation | | | 6 | 10 | mW | Full temp range, test level VI | 3 |-| VD, VDD Supply Voltage (absolute maximum) | VD, VDD | | | 7 | V | | 4 |-| Analog Inputs voltage (absolute maximum) | | -0.5 | | | V | Upper limit printed as VD + 0.5 V | 4 |-| Digital Inputs voltage (absolute maximum) | | -0.5 | | | V | Upper limit printed as VDD + 0.5 V | 4 |-| VREF Input voltage (absolute maximum) | | -0.5 | | | V | Upper limit printed as VD + 0.5 V | 4 |-| Digital Output Current (absolute maximum) | | | | 20 | mA | | 4 |+| Differential Nonlinearity | | | 0.75 | 1.9 | LSB | 25°C; test level I | 2 |+| Differential Nonlinearity | | | | 2 | LSB | Full temp; test level VI | 2 |+| Integral Nonlinearity | | | 0.75 | 1.9 | LSB | 25°C; test level I | 2 |+| Integral Nonlinearity | | | | 2 | LSB | Full temp; test level VI | 2 |+| Gain Error | | -6 | -2.5 | 6 | % FS | 25°C; test level I; fixed 2.5 V external reference | 2 |+| Gain Error | | -8 | | 8 | % FS | Full temp; test level VI | 2 |+| Gain Tempco | | -70 | | 70 | ppm/°C | Full temp; test level V (printed ±70) | 2 |+| Input Offset Voltage | | -15 | 0 | 15 | mV | 25°C; test level I | 2 |+| Input Offset Voltage | | -25 | | 25 | mV | Full temp; test level VI | 2 |+| Input Bias Current | | | 6 | 16 | mA | 25°C; test level I | 2 |+| Input Bias Current | | | | 25 | mA | Full temp; test level VI | 2 |+| Band Gap Reference Output Voltage | | 2.4 | 2.5 | 2.6 | V | Full temp; test level VI | 2 |+| Band Gap Reference Temperature Coefficient | | -10 | | 10 | ppm/°C | Full temp; test level V (printed ±10) | 2 |+| Maximum Conversion Rate | | | | 80 | MSPS | Full temp; test level VI; -80 grade | 2 |+| Minimum Conversion Rate | | 5 | | | MSPS | Full temp; test level IV | 2 |+| Output Valid Time | tV | 4 | | 6.6 | ns | Full temp; test level IV; note 2: from encode 1.5 V level to 10%/90% output levels | 2 |+| Output Propagation Delay | tPD | 8 | | 11.3 | ns | Full temp; test level IV; note 2: from encode 1.5 V level to 10%/90% output levels | 2 |+| Signal-to-Noise and Distortion (SINAD), with harmonics | | 41.5 | 45 | | dB | fIN = 10.3 MHz; 25°C; test level I; -0.5 dBFS | 2 |+| Effective Number of Bits (ENOB) | | 6.6 | 7.2 | | Bits | fIN = 10.3 MHz; 25°C; test level I | 2 |+| Signal-to-Noise Ratio (SNR), without harmonics | | 42.5 | 46 | | dB | fIN = 10.3 MHz; 25°C; test level I | 2 |+| Second Harmonic Distortion | | | -62 | -50 | dBc | fIN = 10.3 MHz; 25°C; test level I | 2 |+| Third Harmonic Distortion | | | -60 | -46 | dBc | fIN = 10.3 MHz; 25°C; test level I | 2 |+| Logic 1 Voltage (digital inputs) | | 2 | | | V | Full temp; test level VI | 2 |+| Logic 0 Voltage (digital inputs) | | | | 0.8 | V | Full temp; test level VI | 2 |+| Logic 1 Current | | -1 | | 1 | mA | Full temp; test level VI (printed ±1) | 2 |+| Logic 0 Current | | -1 | | 1 | mA | Full temp; test level VI (printed ±1) | 2 |+| Encode Pulsewidth High | tEH | 5.5 | | 166 | ns | 25°C; test level IV | 2 |+| Encode Pulsewidth Low | tEL | 5.5 | | 166 | ns | 25°C; test level IV | 2 |+| Logic 1 Voltage | | 2.95 | | | V | VDD = 3 V; Full temp; test level VI | 3 |+| Logic 1 Voltage | | 4.95 | | | V | VDD = 5 V; Full temp; test level IV | 3 |+| Logic 0 Voltage (digital outputs) | | | | 0.05 | V | Full temp; test level VI | 3 |+| VD Supply Current | VD | | 40 | 51 | mA | VD = 5 V; Full temp; test level VI | 3 |+| VDD Supply Current | VDD | | 7.4 | 8.8 | mA | VDD = 3 V; Full temp; test level VI; note 4 | 3 |+| Power Dissipation | | | 220 | 281 | mW | Notes 5,6: 10.3 MHz -0.5 dBFS input; VD = 5 V ±5%, VDD = 3 V ±5%; Full temp; test level VI | 3 |+| Power-Down Dissipation | | | 6 | 10 | mW | Full temp; test level VI | 3 |+| Supply Voltage VD, VDD (absolute maximum) | | | | 7 | V | | 4 |+| Analog Inputs (max = VD + 0.5 V) | | -0.5 | | | V | Printed maximum is VD + 0.5 V (not a fixed number) | 4 |+| Digital Inputs (max = VDD + 0.5 V) | | -0.5 | | | V | Printed maximum is VDD + 0.5 V (not a fixed number) | 4 |+| VREF Input (max = VD + 0.5 V) | | -0.5 | | | V | Printed maximum is VD + 0.5 V (not a fixed number) | 4 |+| Digital Output Current | | | | 20 | mA | | 4 | | Operating Temperature (absolute maximum) | | -55 | | 125 | °C | | 4 |-| Storage Temperature (absolute maximum) | | -65 | | 150 | °C | | 4 |+| Storage Temperature | | -65 | | 150 | °C | | 4 | | Maximum Junction Temperature | | | | 150 | °C | | 4 | | Maximum Case Temperature | | | | 150 | °C | | 4 |-| VDD Digital Output Supply (nominal range) | VDD | 3 | | 5 | V | Nominally 3 V to 5 V per pin description | 4 |-| Operating Temperature Range (industrial) | | -40 | | 85 | °C | Per ordering guide, RS-20 package | 4 |-| VREF IN Reference Input Tolerance | VREF IN | -10 | | 10 | % | External reference, ±10% printed | 4 |-| Internal Bias Resistor Tolerance (BIAS OUT to VREF IN) | | -20 | | 20 | % | ±20% printed | 7 |-| Power-Down Time before high-impedance outputs | | 200 | | | ns | Minimum, PWRDN high | 8 |-| Power-Up Period before accurate output data | | 200 | | | ns | Minimum, after reactivation | 8 |-| Thermal Resistance Junction-to-Case | θJC | | 46 | | °C/W | Typical, RS-20 SSOP package, Note 6 | 3 |-| Thermal Resistance Case-to-Ambient | θCA | | 80 | | °C/W | Typical, RS-20 SSOP package, Note 6 | 3 |-| Thermal Resistance Junction-to-Ambient | θJA | | 126 | | °C/W | Typical, RS-20 SSOP package, Note 6 | 3 |-| VREF IN Reference Input | VREF IN | | 2.5 | | V | Typical, external reference per pin description | 4 |-| Internal Bias Resistor (BIAS OUT to VREF IN) | | | 1 | | kW | Internal, printed as 1 kW | 7 |-| Input Voltage Range | | | 1 | | V p-p | Centered at 2.5 V, 25°C, test level V | 2 |-| Input Resistance | | | 150 | | kW | 25°C, test level V | 2 |-| Analog Bandwidth | | | 120 | | MHz | 25°C, test level V | 2 |-| SINAD (With Harmonics), fIN = 76 MHz | SINAD | | 43.5 | | dB | fIN = 76 MHz, 25°C, test level V | 2 |-| Two Tone Intermodulation Distortion | IMD | | -52 | | dBc | Two tone, 25°C, test level V | 2 |+| Thermal Resistance, junction-to-case (RS 20-lead SSOP) | θJC | | 46 | | °C/W | Typical | 3 |+| Thermal Resistance, case-to-ambient (RS 20-lead SSOP) | θCA | | 80 | | °C/W | Typical | 3 |+| Thermal Resistance, junction-to-ambient (RS 20-lead SSOP) | θJA | | 126 | | °C/W | Typical | 3 |+| Operating Temperature Range (industrial) | | -40 | | 85 | °C | Ordering guide; industrial range | 4 |+| VDD Digital Output Supply | VDD | 3 | | 5 | V | Nominally 3 V to 5 V | 4 |+| Power-Down Time before high-impedance outputs | | 200 | | | ns | Minimum; PWRDN high | 8 |+| Power-Up Period before accurate output data | | 200 | | | ns | Minimum | 8 |+| Analog Supply VD tolerance | VD | -5 | | 5 | % | Note 5 test conditions (VD = 5 V ±5%) | 3 |+| VREF IN tolerance | VREF IN | -10 | | 10 | % | External reference 2.5 V typ ±10% | 4 |+| Analog Supply VD | VD | | 5 | | V | Nominal; test conditions VD = 5 V | 3 |+| Band Gap Reference Output Voltage (VREF IN nominal) | VREF IN | | 2.5 | | V | Typical external reference input | 4 | ## CAD (KiCad official) @@ -116,7 +111,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/AD9057.pdf) (12 pp, sha256 `16ade094d0d3c1ab`, retrieved 2026-11-12, tier: manufacturer)+- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/AD9057.pdf) (12 pp, sha256 `16ade094d0d3c1ab`, retrieved 2026-11-13, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).
ad9057brsz-80.kicad_sym+9−9@@ -28,7 +28,7 @@ (name "VD" (effects (font (size 1.27 1.27)))) (number "5" (effects (font (size 1.27 1.27)))) )- (pin output line (at -17.78 -2.54 0) (length 5.08)+ (pin passive line (at -17.78 -2.54 0) (length 5.08) (name "BIAS OUT" (effects (font (size 1.27 1.27)))) (number "6" (effects (font (size 1.27 1.27)))) )@@ -48,19 +48,19 @@ (name "ENCODE" (effects (font (size 1.27 1.27)))) (number "10" (effects (font (size 1.27 1.27)))) )- (pin output line (at 17.78 10.16 180) (length 5.08)+ (pin tri_state line (at 17.78 10.16 180) (length 5.08) (name "D0" (effects (font (size 1.27 1.27)))) (number "20" (effects (font (size 1.27 1.27)))) )- (pin output line (at 17.78 7.62 180) (length 5.08)+ (pin tri_state line (at 17.78 7.62 180) (length 5.08) (name "D1" (effects (font (size 1.27 1.27)))) (number "19" (effects (font (size 1.27 1.27)))) )- (pin output line (at 17.78 5.08 180) (length 5.08)+ (pin tri_state line (at 17.78 5.08 180) (length 5.08) (name "D2" (effects (font (size 1.27 1.27)))) (number "18" (effects (font (size 1.27 1.27)))) )- (pin output line (at 17.78 2.54 180) (length 5.08)+ (pin tri_state line (at 17.78 2.54 180) (length 5.08) (name "D3" (effects (font (size 1.27 1.27)))) (number "17" (effects (font (size 1.27 1.27)))) )@@ -72,19 +72,19 @@ (name "VDD" (effects (font (size 1.27 1.27)))) (number "15" (effects (font (size 1.27 1.27)))) )- (pin output line (at 17.78 -5.08 180) (length 5.08)+ (pin tri_state line (at 17.78 -5.08 180) (length 5.08) (name "D4" (effects (font (size 1.27 1.27)))) (number "14" (effects (font (size 1.27 1.27)))) )- (pin output line (at 17.78 -7.62 180) (length 5.08)+ (pin tri_state line (at 17.78 -7.62 180) (length 5.08) (name "D5" (effects (font (size 1.27 1.27)))) (number "13" (effects (font (size 1.27 1.27)))) )- (pin output line (at 17.78 -10.16 180) (length 5.08)+ (pin tri_state line (at 17.78 -10.16 180) (length 5.08) (name "D6" (effects (font (size 1.27 1.27)))) (number "12" (effects (font (size 1.27 1.27)))) )- (pin output line (at 17.78 -12.70 180) (length 5.08)+ (pin tri_state line (at 17.78 -12.70 180) (length 5.08) (name "D7" (effects (font (size 1.27 1.27)))) (number "11" (effects (font (size 1.27 1.27)))) )
ad9057brsz-80.lbr+9−9@@ -110,21 +110,21 @@ <pin name="VREF_IN" x="-17.78" y="5.08" length="middle" direction="pwr"/> <pin name="GND" x="-17.78" y="2.54" length="middle" direction="pwr"/> <pin name="VD" x="-17.78" y="0" length="middle" direction="pwr"/>- <pin name="BIAS_OUT" x="-17.78" y="-2.54" length="middle" direction="out"/>+ <pin name="BIAS_OUT" x="-17.78" y="-2.54" length="middle" direction="pas"/> <pin name="AIN" x="-17.78" y="-5.08" length="middle" direction="in"/> <pin name="VD@2" x="-17.78" y="-7.62" length="middle" direction="pwr"/> <pin name="GND@2" x="-17.78" y="-10.16" length="middle" direction="pwr"/> <pin name="ENCODE" x="-17.78" y="-12.7" length="middle" direction="in"/>- <pin name="D0" x="17.78" y="10.16" length="middle" direction="out" rot="R180"/>- <pin name="D1" x="17.78" y="7.62" length="middle" direction="out" rot="R180"/>- <pin name="D2" x="17.78" y="5.08" length="middle" direction="out" rot="R180"/>- <pin name="D3" x="17.78" y="2.54" length="middle" direction="out" rot="R180"/>+ <pin name="D0" x="17.78" y="10.16" length="middle" direction="hiz" rot="R180"/>+ <pin name="D1" x="17.78" y="7.62" length="middle" direction="hiz" rot="R180"/>+ <pin name="D2" x="17.78" y="5.08" length="middle" direction="hiz" rot="R180"/>+ <pin name="D3" x="17.78" y="2.54" length="middle" direction="hiz" rot="R180"/> <pin name="GND@3" x="17.78" y="0" length="middle" direction="pwr" rot="R180"/> <pin name="VDD" x="17.78" y="-2.54" length="middle" direction="pwr" rot="R180"/>- <pin name="D4" x="17.78" y="-5.08" length="middle" direction="out" rot="R180"/>- <pin name="D5" x="17.78" y="-7.62" length="middle" direction="out" rot="R180"/>- <pin name="D6" x="17.78" y="-10.16" length="middle" direction="out" rot="R180"/>- <pin name="D7" x="17.78" y="-12.7" length="middle" direction="out" rot="R180"/>+ <pin name="D4" x="17.78" y="-5.08" length="middle" direction="hiz" rot="R180"/>+ <pin name="D5" x="17.78" y="-7.62" length="middle" direction="hiz" rot="R180"/>+ <pin name="D6" x="17.78" y="-10.16" length="middle" direction="hiz" rot="R180"/>+ <pin name="D7" x="17.78" y="-12.7" length="middle" direction="hiz" rot="R180"/> </symbol> </symbols> <devicesets>
package.json+39−40@@ -1,6 +1,6 @@ { "slug": "ad9057brsz-80",- "version": "0.1.1",+ "version": "0.1.2", "type": "component", "description": "Analog Devices Analog To Digital Converters (ADCs), SSOP-20-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -28,8 +28,7 @@ "viewers/symbol.html", "viewers/footprint.html", "ad9057brsz-80-hero.glb",- "ad9057brsz-80-hero.overlay.json",- "ad9057brsz-80-etched.glb"+ "ad9057brsz-80-hero.overlay.json" ], "component": { "mpn": "AD9057BRSZ-80",@@ -43,7 +42,7 @@ "symbol": "ad9057brsz-80.kicad_sym", "footprint": "ad9057brsz-80.kicad_mod", "model_3d": "ad9057brsz-80-hero.glb",- "model_3d_plain": "ad9057brsz-80-etched.glb",+ "model_3d_plain": "ad9057brsz-80.glb", "model_3d_step": "ad9057brsz-80-etched.step", "model_3d_step_plain": "ad9057brsz-80.step", "lbr": "ad9057brsz-80.lbr"@@ -54,7 +53,7 @@ "mouser": "584-AD9057BRSZ-80" }, "distributor_check": {- "checked_at": "2026-11-12T07:58:15Z",+ "checked_at": "2026-11-13T01:41:43Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "AD9057BRSZ-80-ND",@@ -70,121 +69,121 @@ "number": "1", "name": "PWRDN", "type": "input",- "description": "Power-down select: logic high puts the ADC into power-down mode and drives the digital outputs to high impedance, and Pin 1 should be tied to ground if power-down is not used."+ "description": "Power-down select: logic high puts the ADC into power-down mode and drives the digital outputs to high impedance, and the pin should be tied to ground if power-down is not wanted." }, { "number": "2", "name": "VREF OUT", "type": "power_in",- "description": "Internal 2.5 V (typ) reference output that should be bypassed with 0.1 µF to ground and can provide 300 mA of drive current for DC biasing."+ "description": "Internal 2.5 V (typ) reference output that should be bypassed to ground with 0.1 µF and can supply up to 300 mA of drive current." }, { "number": "3", "name": "VREF IN", "type": "power_in",- "description": "Reference input for the ADC at 2.5 V typical (±10%), which can be driven by an external reference with VREF OUT disconnected."+ "description": "Reference input for the ADC at 2.5 V typ (±10%), which sets the ADC gain and midscale; the datasheet states gain adjustment of up to ±10% with an external reference." }, { "number": "4", "name": "GND", "type": "power_in",- "description": "Analog and digital ground."+ "description": "Analog/digital ground." }, { "number": "5", "name": "VD", "type": "power_in",- "description": "Analog 5 V power supply for the ADC (VD = 5 V ±5% in the stated test conditions)."+ "description": "Analog 5 V power supply (specified at VD = 5 V, ±5%, with absolute maximum of 7 V)." }, { "number": "6", "name": "BIAS OUT",- "type": "output",- "description": "Bias pin for AC coupling, connected to VREF IN through the internal 1 kΩ (±20%) bias resistor."+ "type": "passive",+ "description": "Bias pin for AC coupling of the analog input, connected internally through a 1 kΩ (±20%) resistor to REF IN." }, { "number": "7", "name": "AIN", "type": "input",- "description": "Single-ended analog input with a 1.0 V p-p input range centered at 2.5 V and 150 kΩ input resistance."+ "description": "Single-ended analog input with 1.0 V p-p full-scale range centered at 2.5 V and 150 kΩ input resistance." }, { "number": "8", "name": "VD", "type": "power_in",- "description": "Analog 5 V power supply for the ADC (second VD pin, same net as Pin 5)."+ "description": "Analog 5 V power supply (second VD pin, same supply as pin 5)." }, { "number": "9", "name": "GND", "type": "power_in",- "description": "Analog and digital ground (second GND pin, same net as Pin 4)."+ "description": "Analog/digital ground." }, { "number": "10", "name": "ENCODE", "type": "input",- "description": "TTL/CMOS-compatible encode clock; the ADC samples on the rising edge of ENCODE, with encode pulsewidth high and low of at least 5.5 ns at 80 MSPS."+ "description": "Single-ended TTL/CMOS encode clock on which the ADC samples on the rising edge, guaranteed for conversion rates from 5 MSPS to 80 MSPS for this grade." }, { "number": "11", "name": "D7",- "type": "output",- "description": "Digital output bit 7, the MSB, in offset binary code; goes to high impedance in power-down mode."+ "type": "tri_state",+ "description": "ADC digital output, MSB, offset binary code; goes high impedance in power-down mode." }, { "number": "12", "name": "D6",- "type": "output",- "description": "Digital output bit 6 in offset binary code; goes to high impedance in power-down mode."+ "type": "tri_state",+ "description": "ADC digital output bit 6, offset binary code; goes high impedance in power-down mode." }, { "number": "13", "name": "D5",- "type": "output",- "description": "Digital output bit 5 in offset binary code; goes to high impedance in power-down mode."+ "type": "tri_state",+ "description": "ADC digital output bit 5, offset binary code; goes high impedance in power-down mode." }, { "number": "14", "name": "D4",- "type": "output",- "description": "Digital output bit 4 in offset binary code; goes to high impedance in power-down mode."+ "type": "tri_state",+ "description": "ADC digital output bit 4, offset binary code; goes high impedance in power-down mode." }, { "number": "15", "name": "VDD", "type": "power_in",- "description": "Digital output power supply, nominally 3 V to 5 V and isolated from the analog VD supply."+ "description": "Digital output power supply, nominally 3 V to 5 V, isolated from the analog VD supply to minimize digital noise coupling." }, { "number": "16", "name": "GND", "type": "power_in",- "description": "Ground (third GND pin on the package)."+ "description": "Analog/digital ground." }, { "number": "17", "name": "D3",- "type": "output",- "description": "Digital output bit 3 in offset binary code; goes to high impedance in power-down mode."+ "type": "tri_state",+ "description": "ADC digital output bit 3, offset binary code; goes high impedance in power-down mode." }, { "number": "18", "name": "D2",- "type": "output",- "description": "Digital output bit 2 in offset binary code; goes to high impedance in power-down mode."+ "type": "tri_state",+ "description": "ADC digital output bit 2, offset binary code; goes high impedance in power-down mode." }, { "number": "19", "name": "D1",- "type": "output",- "description": "Digital output bit 1 in offset binary code; goes to high impedance in power-down mode."+ "type": "tri_state",+ "description": "ADC digital output bit 1, offset binary code; goes high impedance in power-down mode." }, { "number": "20", "name": "D0",- "type": "output",- "description": "Digital output bit 0, the LSB, in offset binary code; goes to high impedance in power-down mode."+ "type": "tri_state",+ "description": "ADC digital output LSB, offset binary code; goes high impedance in power-down mode." } ], "provenance": {@@ -198,11 +197,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The MPN given is AD9057BRSZ-80, but the datasheet ordering guide lists AD9057BRS-80 (RS-20 SSOP). Th; The datasheet does not state the '208mil' width from the package hint. It gives only 'Shrink Small O; Digital output pins D7–D0 are given as ranges (11–14, 17–20). The per-pin bit mapping comes from the"+ "extractor flagged: The requested MPN AD9057BRSZ-80 does not appear in the datasheet. The ordering guide lists AD9057BRS; The pin-number and pin-name mapping was taken from the 'PIN FUNCTION DESCRIPTIONS' table on page 4. ; Digital output types were set to tri_state because the datasheet states the outputs go to high imped" ], "pages_sent": 12,- "cost_usd": 0.0819,- "at": "2026-11-12T07:57:44"+ "cost_usd": 0.0767,+ "at": "2026-11-13T01:41:27" }, "datasheet": { "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/AD9057.pdf",@@ -239,7 +238,7 @@ "centre_offset_mm": 0.0, "footprint_binding": "identity", "sha256": "c9a01a276d0b4d9561efd58f2fcee56f52c1b6ab464ea7a0380cab4e87a924e6",- "checked": "2026-11-12",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -257,8 +256,8 @@ "zmin_mm": 0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "a976d974fd9b14168cb4a1a37dbafcbab01c33b38d24074e1e23cf4770677830",- "checked": "2026-11-12",+ "sha256": "146bd9aaaa290471bd662c0703a64b86c32605cafc9dd97ce4bef3cfd172716f",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],
page.json+42−41@@ -4,7 +4,7 @@ "slug": "ad9057brsz-80", "title": "AD9057BRSZ-80", "brief": "Analog Devices Analog To Digital Converters (ADCs), SSOP-20-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.1",+ "version": "0.1.2", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -25,7 +25,7 @@ "symbol": "ad9057brsz-80.kicad_sym", "footprint": "ad9057brsz-80.kicad_mod", "model_3d": "ad9057brsz-80-hero.glb",- "model_3d_plain": "ad9057brsz-80-etched.glb",+ "model_3d_plain": "ad9057brsz-80.glb", "model_3d_step": "ad9057brsz-80-etched.step", "model_3d_step_plain": "ad9057brsz-80.step", "lbr": "ad9057brsz-80.lbr"@@ -36,7 +36,7 @@ "mouser": "584-AD9057BRSZ-80" }, "distributor_check": {- "checked_at": "2026-11-12T07:58:15Z",+ "checked_at": "2026-11-13T01:41:43Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "AD9057BRSZ-80-ND",@@ -52,121 +52,121 @@ "number": "1", "name": "PWRDN", "type": "input",- "description": "Power-down select: logic high puts the ADC into power-down mode and drives the digital outputs to high impedance, and Pin 1 should be tied to ground if power-down is not used."+ "description": "Power-down select: logic high puts the ADC into power-down mode and drives the digital outputs to high impedance, and the pin should be tied to ground if power-down is not wanted." }, { "number": "2", "name": "VREF OUT", "type": "power_in",- "description": "Internal 2.5 V (typ) reference output that should be bypassed with 0.1 µF to ground and can provide 300 mA of drive current for DC biasing."+ "description": "Internal 2.5 V (typ) reference output that should be bypassed to ground with 0.1 µF and can supply up to 300 mA of drive current." }, { "number": "3", "name": "VREF IN", "type": "power_in",- "description": "Reference input for the ADC at 2.5 V typical (±10%), which can be driven by an external reference with VREF OUT disconnected."+ "description": "Reference input for the ADC at 2.5 V typ (±10%), which sets the ADC gain and midscale; the datasheet states gain adjustment of up to ±10% with an external reference." }, { "number": "4", "name": "GND", "type": "power_in",- "description": "Analog and digital ground."+ "description": "Analog/digital ground." }, { "number": "5", "name": "VD", "type": "power_in",- "description": "Analog 5 V power supply for the ADC (VD = 5 V ±5% in the stated test conditions)."+ "description": "Analog 5 V power supply (specified at VD = 5 V, ±5%, with absolute maximum of 7 V)." }, { "number": "6", "name": "BIAS OUT",- "type": "output",- "description": "Bias pin for AC coupling, connected to VREF IN through the internal 1 kΩ (±20%) bias resistor."+ "type": "passive",+ "description": "Bias pin for AC coupling of the analog input, connected internally through a 1 kΩ (±20%) resistor to REF IN." }, { "number": "7", "name": "AIN", "type": "input",- "description": "Single-ended analog input with a 1.0 V p-p input range centered at 2.5 V and 150 kΩ input resistance."+ "description": "Single-ended analog input with 1.0 V p-p full-scale range centered at 2.5 V and 150 kΩ input resistance." }, { "number": "8", "name": "VD", "type": "power_in",- "description": "Analog 5 V power supply for the ADC (second VD pin, same net as Pin 5)."+ "description": "Analog 5 V power supply (second VD pin, same supply as pin 5)." }, { "number": "9", "name": "GND", "type": "power_in",- "description": "Analog and digital ground (second GND pin, same net as Pin 4)."+ "description": "Analog/digital ground." }, { "number": "10", "name": "ENCODE", "type": "input",- "description": "TTL/CMOS-compatible encode clock; the ADC samples on the rising edge of ENCODE, with encode pulsewidth high and low of at least 5.5 ns at 80 MSPS."+ "description": "Single-ended TTL/CMOS encode clock on which the ADC samples on the rising edge, guaranteed for conversion rates from 5 MSPS to 80 MSPS for this grade." }, { "number": "11", "name": "D7",- "type": "output",- "description": "Digital output bit 7, the MSB, in offset binary code; goes to high impedance in power-down mode."+ "type": "tri_state",+ "description": "ADC digital output, MSB, offset binary code; goes high impedance in power-down mode." }, { "number": "12", "name": "D6",- "type": "output",- "description": "Digital output bit 6 in offset binary code; goes to high impedance in power-down mode."+ "type": "tri_state",+ "description": "ADC digital output bit 6, offset binary code; goes high impedance in power-down mode." }, { "number": "13", "name": "D5",- "type": "output",- "description": "Digital output bit 5 in offset binary code; goes to high impedance in power-down mode."+ "type": "tri_state",+ "description": "ADC digital output bit 5, offset binary code; goes high impedance in power-down mode." }, { "number": "14", "name": "D4",- "type": "output",- "description": "Digital output bit 4 in offset binary code; goes to high impedance in power-down mode."+ "type": "tri_state",+ "description": "ADC digital output bit 4, offset binary code; goes high impedance in power-down mode." }, { "number": "15", "name": "VDD", "type": "power_in",- "description": "Digital output power supply, nominally 3 V to 5 V and isolated from the analog VD supply."+ "description": "Digital output power supply, nominally 3 V to 5 V, isolated from the analog VD supply to minimize digital noise coupling." }, { "number": "16", "name": "GND", "type": "power_in",- "description": "Ground (third GND pin on the package)."+ "description": "Analog/digital ground." }, { "number": "17", "name": "D3",- "type": "output",- "description": "Digital output bit 3 in offset binary code; goes to high impedance in power-down mode."+ "type": "tri_state",+ "description": "ADC digital output bit 3, offset binary code; goes high impedance in power-down mode." }, { "number": "18", "name": "D2",- "type": "output",- "description": "Digital output bit 2 in offset binary code; goes to high impedance in power-down mode."+ "type": "tri_state",+ "description": "ADC digital output bit 2, offset binary code; goes high impedance in power-down mode." }, { "number": "19", "name": "D1",- "type": "output",- "description": "Digital output bit 1 in offset binary code; goes to high impedance in power-down mode."+ "type": "tri_state",+ "description": "ADC digital output bit 1, offset binary code; goes high impedance in power-down mode." }, { "number": "20", "name": "D0",- "type": "output",- "description": "Digital output bit 0, the LSB, in offset binary code; goes to high impedance in power-down mode."+ "type": "tri_state",+ "description": "ADC digital output LSB, offset binary code; goes high impedance in power-down mode." } ], "provenance": {@@ -180,11 +180,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The MPN given is AD9057BRSZ-80, but the datasheet ordering guide lists AD9057BRS-80 (RS-20 SSOP). Th; The datasheet does not state the '208mil' width from the package hint. It gives only 'Shrink Small O; Digital output pins D7–D0 are given as ranges (11–14, 17–20). The per-pin bit mapping comes from the"+ "extractor flagged: The requested MPN AD9057BRSZ-80 does not appear in the datasheet. The ordering guide lists AD9057BRS; The pin-number and pin-name mapping was taken from the 'PIN FUNCTION DESCRIPTIONS' table on page 4. ; Digital output types were set to tri_state because the datasheet states the outputs go to high imped" ], "pages_sent": 12,- "cost_usd": 0.0819,- "at": "2026-11-12T07:57:44"+ "cost_usd": 0.0767,+ "at": "2026-11-13T01:41:27" }, "datasheet": { "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/AD9057.pdf",@@ -221,7 +221,7 @@ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "c9a01a276d0b4d9561efd58f2fcee56f52c1b6ab464ea7a0380cab4e87a924e6",- "checked": "2026-11-12",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -239,8 +239,8 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "a976d974fd9b14168cb4a1a37dbafcbab01c33b38d24074e1e23cf4770677830",- "checked": "2026-11-12",+ "sha256": "146bd9aaaa290471bd662c0703a64b86c32605cafc9dd97ce4bef3cfd172716f",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],@@ -1062,10 +1062,11 @@ "viewers/symbol.html", "viewers/footprint.html", "ad9057brsz-80-hero.glb",- "ad9057brsz-80-hero.overlay.json",- "ad9057brsz-80-etched.glb"+ "ad9057brsz-80-hero.overlay.json" ], "visibility": { "public": true- }+ },+ "description": "Analog Devices Analog To Digital Converters (ADCs), SSOP-20-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }