← Commit history
README.md+79−70
@@ -8,26 +8,26 @@ AD9057BRSZ-80 from Analog Devices, in a SSOP-20-208mil. Pinout and pin descripti  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | PWRDN | input | Power-down select; logic high enters power-down mode (digital outputs go to high impedance), and the pin should be tied to ground if power-down is not used. |-| 2 | VREF OUT | power_in | Internal 2.5 V (typ) reference output; bypass with 0.1 µF to ground. |-| 3 | VREF IN | power_in | Reference input for the ADC, 2.5 V typ ±10%. |-| 4 | GND | power_in | Ground (analog/digital). |-| 5 | VD | power_in | Analog 5 V power supply. |-| 6 | BIAS OUT | passive | Bias pin for AC coupling, connected through an internal 1 kΩ resistor to REF IN. |-| 7 | AIN | input | Analog input for the ADC, 1 V p-p range centered at 2.5 V. |-| 8 | VD | power_in | Analog 5 V power supply. |-| 9 | GND | power_in | Ground (analog/digital). |-| 10 | ENCODE | input | Encode clock for the ADC, TTL/CMOS compatible; the ADC samples on the rising edge. |-| 11 | D7 | tri_state | Digital output bit 7 (MSB) of the ADC; goes high impedance in power-down. |-| 12 | D6 | tri_state | Digital output bit 6 of the ADC; goes high impedance in power-down. |-| 13 | D5 | tri_state | Digital output bit 5 of the ADC; goes high impedance in power-down. |-| 14 | D4 | tri_state | Digital output bit 4 of the ADC; goes high impedance in power-down. |-| 15 | VDD | power_in | Digital output power supply, nominally 3 V to 5 V. |-| 16 | GND | power_in | Ground (analog/digital). |-| 17 | D3 | tri_state | Digital output bit 3 of the ADC; goes high impedance in power-down. |-| 18 | D2 | tri_state | Digital output bit 2 of the ADC; goes high impedance in power-down. |-| 19 | D1 | tri_state | Digital output bit 1 of the ADC; goes high impedance in power-down. |-| 20 | D0 | tri_state | Digital output bit 0 (LSB) of the ADC; goes high impedance in power-down. |+| 1 | PWRDN | input | Power-down select: logic high puts the ADC into power-down mode and drives the digital outputs to high impedance, and Pin 1 should be tied to ground if power-down is not used. |+| 2 | VREF OUT | power_in | Internal 2.5 V (typ) reference output that should be bypassed with 0.1 µF to ground and can provide 300 mA of drive current for DC biasing. |+| 3 | VREF IN | power_in | Reference input for the ADC at 2.5 V typical (±10%), which can be driven by an external reference with VREF OUT disconnected. |+| 4 | GND | power_in | Analog and digital ground. |+| 5 | VD | power_in | Analog 5 V power supply for the ADC (VD = 5 V ±5% in the stated test conditions). |+| 6 | BIAS OUT | output | Bias pin for AC coupling, connected to VREF IN through the internal 1 kΩ (±20%) bias resistor. |+| 7 | AIN | input | Single-ended analog input with a 1.0 V p-p input range centered at 2.5 V and 150 kΩ input resistance. |+| 8 | VD | power_in | Analog 5 V power supply for the ADC (second VD pin, same net as Pin 5). |+| 9 | GND | power_in | Analog and digital ground (second GND pin, same net as Pin 4). |+| 10 | ENCODE | input | TTL/CMOS-compatible encode clock; the ADC samples on the rising edge of ENCODE, with encode pulsewidth high and low of at least 5.5 ns at 80 MSPS. |+| 11 | D7 | output | Digital output bit 7, the MSB, in offset binary code; goes to high impedance in power-down mode. |+| 12 | D6 | output | Digital output bit 6 in offset binary code; goes to high impedance in power-down mode. |+| 13 | D5 | output | Digital output bit 5 in offset binary code; goes to high impedance in power-down mode. |+| 14 | D4 | output | Digital output bit 4 in offset binary code; goes to high impedance in power-down mode. |+| 15 | VDD | power_in | Digital output power supply, nominally 3 V to 5 V and isolated from the analog VD supply. |+| 16 | GND | power_in | Ground (third GND pin on the package). |+| 17 | D3 | output | Digital output bit 3 in offset binary code; goes to high impedance in power-down mode. |+| 18 | D2 | output | Digital output bit 2 in offset binary code; goes to high impedance in power-down mode. |+| 19 | D1 | output | Digital output bit 1 in offset binary code; goes to high impedance in power-down mode. |+| 20 | D0 | output | Digital output bit 0, the LSB, in offset binary code; goes to high impedance in power-down mode. |  ## Key specifications @@ -44,57 +44,66 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Differential Nonlinearity | DNL |  | 0.75 | 1.9 | LSB | 25°C | 2 |-| Differential Nonlinearity (Full) | DNL |  |  | 2 | LSB | Full temp | 2 |-| Integral Nonlinearity | INL |  | 0.75 | 1.9 | LSB | 25°C | 2 |-| Integral Nonlinearity (Full) | INL |  |  | 2 | LSB | Full temp | 2 |-| Gain Error |  | -6 | -2.5 | 6 | % FS | 25°C | 2 |-| Gain Error (Full) |  | -8 |  | 8 | % FS | Full temp | 2 |-| Input Offset Voltage |  | -15 | 0 | 15 | mV | 25°C | 2 |-| Input Offset Voltage (Full) |  | -25 |  | 25 | mV | Full temp | 2 |-| Input Bias Current |  |  | 6 | 16 | mA | 25°C | 2 |-| Input Bias Current (Full) |  |  |  | 25 | mA | Full temp | 2 |-| Reference Output Voltage |  | 2.4 | 2.5 | 2.6 | V | Full temp | 2 |-| Maximum Conversion Rate |  | 80 |  |  | MSPS | Full temp | 2 |-| Minimum Conversion Rate |  |  |  | 5 | MSPS | Full temp | 2 |-| Output Valid Time | tV | 4 |  | 6.6 | ns | Full temp | 2 |-| Output Propagation Delay | tPD | 8 |  | 11.3 | ns | Full temp | 2 |-| SINAD |  | 41.5 | 45 |  | dB | fIN = 10.3 MHz, 25°C | 2 |-| ENOB |  | 6.6 | 7.2 |  | Bits | fIN = 10.3 MHz, 25°C | 2 |-| SNR |  | 42.5 | 46 |  | dB | fIN = 10.3 MHz, 25°C | 2 |-| Second Harmonic Distortion |  |  | -62 | -50 | dBc | fIN = 10.3 MHz, 25°C | 2 |-| Third Harmonic Distortion |  |  | -60 | -46 | dBc | fIN = 10.3 MHz, 25°C | 2 |-| Logic 1 Voltage (input) |  | 2 |  |  | V | Full temp | 2 |-| Logic 0 Voltage (input) |  |  |  | 0.8 | V | Full temp | 2 |-| Logic 1 Current |  | -1 |  | 1 | mA | Full temp | 2 |-| Logic 0 Current |  | -1 |  | 1 | mA | Full temp | 2 |-| Encode Pulsewidth High | tEH | 5.5 |  | 166 | ns | 25°C | 2 |-| Encode Pulsewidth Low | tEL | 5.5 |  | 166 | ns | 25°C | 2 |-| Logic 1 Voltage (output) |  | 2.95 |  |  | V | VDD = 3 V, Full temp | 3 |-| Logic 1 Voltage (output) |  | 4.95 |  |  | V | VDD = 5 V, Full temp | 3 |-| Logic 0 Voltage (output) |  |  |  | 0.05 | V | Full temp | 3 |-| VD Supply Current |  |  | 40 | 51 | mA | VD = 5 V, Full temp | 3 |-| VDD Supply Current |  |  | 7.4 | 8.8 | mA | VDD = 3 V, Full temp | 3 |-| Power Dissipation |  |  | 220 | 281 | mW | Full temp | 3 |-| Power-Down Dissipation |  |  | 6 | 10 | mW | Full temp | 3 |-| Gain Tempco |  | -70 |  | 70 | ppm/°C | Full temp | 2 |-| Reference Temperature Coefficient |  | -10 |  | 10 | ppm/°C | Full temp | 2 |-| Supply voltage | VD, VDD |  |  | 7 | V |  | 4 |-| Analog Inputs |  | -0.5 |  |  | V | to VD + 0.5 V | 4 |-| Digital Inputs |  | -0.5 |  |  | V | to VDD + 0.5 V | 4 |-| VREF Input |  | -0.5 |  |  | V | to VD + 0.5 V | 4 |-| Digital Output Current |  |  |  | 20 | mA |  | 4 |-| Operating Temperature |  | -55 |  | 125 | °C |  | 4 |-| Storage Temperature |  | -65 |  | 150 | °C |  | 4 |+| Differential Nonlinearity, 25°C |  |  | 0.75 | 1.9 | LSB | 25°C, test level I | 2 |+| Differential Nonlinearity, full temp |  |  |  | 2 | LSB | Full temp range, test level VI | 2 |+| Integral Nonlinearity, 25°C |  |  | 0.75 | 1.9 | LSB | 25°C, test level I | 2 |+| Integral Nonlinearity, full temp |  |  |  | 2 | LSB | Full temp range, test level VI | 2 |+| Gain Error, 25°C |  | -6 | -2.5 | 6 | % FS | 25°C, test level I; ADC only with fixed 2.5 V external reference (Note 1) | 2 |+| Gain Error, full temp |  | -8 |  | 8 | % FS | Full temp range, test level VI | 2 |+| Gain Tempco |  | -70 |  | 70 | ppm/°C | Full temp range, test level V; ±70 printed | 2 |+| Input Offset Voltage, 25°C |  | -15 | 0 | 15 | mV | 25°C, test level I | 2 |+| Input Offset Voltage, full temp |  | -25 |  | 25 | mV | Full temp range, test level VI | 2 |+| Input Bias Current, 25°C |  |  | 6 | 16 | mA | 25°C, test level I; unit printed as mA | 2 |+| Input Bias Current, full temp |  |  |  | 25 | mA | Full temp range, test level VI; unit printed as mA | 2 |+| Band Gap Reference Output Voltage |  | 2.4 | 2.5 | 2.6 | V | Full temp range, test level VI | 2 |+| Band Gap Reference Temperature Coefficient |  | -10 |  | 10 | ppm/°C | Full temp range, test level V; ±10 printed | 2 |+| Maximum Conversion Rate |  |  |  | 80 | MSPS | Full temp range, test level VI; -80 grade | 2 |+| Minimum Conversion Rate |  | 5 |  |  | MSPS | Full temp range, test level IV | 2 |+| Output Valid Time | tV | 4 |  | 6.6 | ns | Full temp range, test level IV; Note 2 | 2 |+| Output Propagation Delay | tPD | 8 |  | 11.3 | ns | Full temp range, test level IV; Note 2 | 2 |+| SINAD (With Harmonics), fIN = 10.3 MHz | SINAD | 41.5 | 45 |  | dB | fIN = 10.3 MHz, 25°C, test level I; Note 3 | 2 |+| ENOB, fIN = 10.3 MHz | ENOB | 6.6 | 7.2 |  | Bits | fIN = 10.3 MHz, 25°C, test level I | 2 |+| SNR (Without Harmonics), fIN = 10.3 MHz | SNR | 42.5 | 46 |  | dB | fIN = 10.3 MHz, 25°C, test level I; Note 3 | 2 |+| Second Harmonic Distortion, fIN = 10.3 MHz |  |  | -62 | -50 | dBc | fIN = 10.3 MHz, 25°C, test level I | 2 |+| Third Harmonic Distortion, fIN = 10.3 MHz |  |  | -60 | -46 | dBc | fIN = 10.3 MHz, 25°C, test level I | 2 |+| Logic 1 Voltage (digital inputs) |  | 2 |  |  | V | Full temp range, test level VI | 2 |+| Logic 0 Voltage (digital inputs) |  |  |  | 0.8 | V | Full temp range, test level VI | 2 |+| Logic 1 Current |  | -1 |  | 1 | mA | Full temp range, test level VI; ±1 printed | 2 |+| Logic 0 Current |  | -1 |  | 1 | mA | Full temp range, test level VI; ±1 printed | 2 |+| Encode Pulsewidth High (tEH) | tEH | 5.5 |  | 166 | ns | 25°C, test level IV | 2 |+| Encode Pulsewidth Low (tEL) | tEL | 5.5 |  | 166 | ns | 25°C, test level IV | 2 |+| Logic 1 Voltage (VDD = 3 V) |  | 2.95 |  |  | V | VDD = 3 V, full temp range, test level VI | 3 |+| Logic 1 Voltage (VDD = 5 V) |  | 4.95 |  |  | V | VDD = 5 V, full temp range, test level IV | 3 |+| Logic 0 Voltage (digital outputs) |  |  |  | 0.05 | V | Full temp range, test level VI | 3 |+| VD Supply Current (VD = 5 V) |  |  | 40 | 51 | mA | VD = 5 V, full temp range, test level VI | 3 |+| VDD Supply Current (VDD = 3 V) |  |  | 7.4 | 8.8 | mA | VDD = 3 V, full temp range, test level VI; Note 4 | 3 |+| Power Dissipation |  |  | 220 | 281 | mW | Full temp range, test level VI; Note 5 | 3 |+| Power-Down Dissipation |  |  | 6 | 10 | mW | Full temp range, test level VI | 3 |+| VD, VDD Supply Voltage (absolute maximum) | VD, VDD |  |  | 7 | V |  | 4 |+| Analog Inputs voltage (absolute maximum) |  | -0.5 |  |  | V | Upper limit printed as VD + 0.5 V | 4 |+| Digital Inputs voltage (absolute maximum) |  | -0.5 |  |  | V | Upper limit printed as VDD + 0.5 V | 4 |+| VREF Input voltage (absolute maximum) |  | -0.5 |  |  | V | Upper limit printed as VD + 0.5 V | 4 |+| Digital Output Current (absolute maximum) |  |  |  | 20 | mA |  | 4 |+| Operating Temperature (absolute maximum) |  | -55 |  | 125 | °C |  | 4 |+| Storage Temperature (absolute maximum) |  | -65 |  | 150 | °C |  | 4 | | Maximum Junction Temperature |  |  |  | 150 | °C |  | 4 | | Maximum Case Temperature |  |  |  | 150 | °C |  | 4 |-| Thermal impedance junction-case | θJC |  | 46 |  | °C/W | 20-lead SSOP | 3 |-| Thermal impedance case-ambient | θCA |  | 80 |  | °C/W | 20-lead SSOP | 3 |-| Thermal impedance junction-ambient | θJA |  | 126 |  | °C/W | 20-lead SSOP | 3 |-| Operating temperature range |  | -40 |  | 85 | °C | AD9057BRS-80 | 4 |-| Resolution |  |  | 8 |  | Bits |  | 2 |-| Input Resistance |  |  | 150 |  | kW | 25°C | 2 |-| Analog Bandwidth |  |  | 120 |  | MHz | 25°C | 2 |+| VDD Digital Output Supply (nominal range) | VDD | 3 |  | 5 | V | Nominally 3 V to 5 V per pin description | 4 |+| Operating Temperature Range (industrial) |  | -40 |  | 85 | °C | Per ordering guide, RS-20 package | 4 |+| VREF IN Reference Input Tolerance | VREF IN | -10 |  | 10 | % | External reference, ±10% printed | 4 |+| Internal Bias Resistor Tolerance (BIAS OUT to VREF IN) |  | -20 |  | 20 | % | ±20% printed | 7 |+| Power-Down Time before high-impedance outputs |  | 200 |  |  | ns | Minimum, PWRDN high | 8 |+| Power-Up Period before accurate output data |  | 200 |  |  | ns | Minimum, after reactivation | 8 |+| Thermal Resistance Junction-to-Case | θJC |  | 46 |  | °C/W | Typical, RS-20 SSOP package, Note 6 | 3 |+| Thermal Resistance Case-to-Ambient | θCA |  | 80 |  | °C/W | Typical, RS-20 SSOP package, Note 6 | 3 |+| Thermal Resistance Junction-to-Ambient | θJA |  | 126 |  | °C/W | Typical, RS-20 SSOP package, Note 6 | 3 |+| VREF IN Reference Input | VREF IN |  | 2.5 |  | V | Typical, external reference per pin description | 4 |+| Internal Bias Resistor (BIAS OUT to VREF IN) |  |  | 1 |  | kW | Internal, printed as 1 kW | 7 |+| Input Voltage Range |  |  | 1 |  | V p-p | Centered at 2.5 V, 25°C, test level V | 2 |+| Input Resistance |  |  | 150 |  | kW | 25°C, test level V | 2 |+| Analog Bandwidth |  |  | 120 |  | MHz | 25°C, test level V | 2 |+| SINAD (With Harmonics), fIN = 76 MHz | SINAD |  | 43.5 |  | dB | fIN = 76 MHz, 25°C, test level V | 2 |+| Two Tone Intermodulation Distortion | IMD |  | -52 |  | dBc | Two tone, 25°C, test level V | 2 |  ## CAD (KiCad official) @@ -108,7 +117,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing:  - **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/AD9057.pdf) (12 pp, sha256 `16ade094d0d3c1ab`, retrieved 2026-11-12, tier: manufacturer)-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).  [Datasheet PDF](docs/ad9057brsz-80-datasheet.pdf)
ad9057brsz-80-hero.overlay.json+527−522
@@ -1,524 +1,529 @@ {-  "spec": "adom-hero 1.4",-  "mpn": "AD9057BRSZ-80",-  "kind": "component + footprint reference art",-  "board_use": false,-  "plane_z_mm": -0.02,-  "units": "metre",-  "upAxis": "Z",-  "layers": {-    "pad_outlines": {-      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-      "rgba": [-        0.0,-        0.902,-        0.863,-        0.5-      ],-      "pads": 20,-      "span_mm": 8.9,-      "dash_mm": 0.2225,-      "gap_mm": 0.1335,-      "pad_stroke_mm": 0.0534-    },-    "silkscreen": {-      "material": "Silkscreen reference lines - 30 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.3-      ],-      "footprint_items": 7,-      "pin1": {-        "source": "footprint silkscreen",-        "pad": "1"-      }-    },-    "signal_names": {-      "material": "Signal names - 50 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.5-      ],-      "font": "DejaVu Sans Mono",-      "labels": 20,-      "sides": "top + mirrored underside (single-sided)",-      "fallback_to_pad_number": 0-    }-  },-  "align": {-    "ok": true,-    "centre_offset_mm": 0.0,-    "tolerance_mm": 0.712,-    "orientation_flipped": false,-    "contacts_bbox_mm": [-      -3.9,-      3.9,-      -3.403,-      3.403-    ],-    "pads_bbox_mm": [-      -4.45,-      4.45,-      -3.125,-      3.125-    ],-    "seating_z_mm": 0.0-  },-  "sources": {-    "glb": "ad9057brsz-80-etched.glb",-    "glb_sha256": "f224ed1496883b9f9777e4e0dd4d081f0a8ec0e1ccd3af49568c92b440ed170d",-    "footprint": "ad9057brsz-80.kicad_mod",-    "footprint_sha256": "4cadf3dc99a77dece6aa99596e5cb28d02a841d6617b1db36e0744f5dfe0431f",-    "pins": "page.json component.pins",-    "pins_sha256": "e403a6dab3b15773fd1f485a59381ca258228a78d04360c9ccf34128da6d13ab"-  },-  "generator": "adom-wiki 1.8.22 (component_hero)",-  "labels": [-    {-      "pad": "1",-      "text": "PWRDN",-      "x": -4.55,-      "y": -2.925,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "2",-      "text": "VREF OUT",-      "x": -4.55,-      "y": -2.275,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "3",-      "text": "VREF IN",-      "x": -4.55,-      "y": -1.625,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "4",-      "text": "GND",-      "x": -4.55,-      "y": -0.975,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "5",-      "text": "VD",-      "x": -4.55,-      "y": -0.325,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "6",-      "text": "BIAS OUT",-      "x": -4.55,-      "y": 0.325,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "7",-      "text": "AIN",-      "x": -4.55,-      "y": 0.975,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "8",-      "text": "VD",-      "x": -4.55,-      "y": 1.625,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "9",-      "text": "GND",-      "x": -4.55,-      "y": 2.275,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "10",-      "text": "ENCODE",-      "x": -4.55,-      "y": 2.925,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "11",-      "text": "D7",-      "x": 4.55,-      "y": 2.925,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "12",-      "text": "D6",-      "x": 4.55,-      "y": 2.275,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "13",-      "text": "D5",-      "x": 4.55,-      "y": 1.625,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "14",-      "text": "D4",-      "x": 4.55,-      "y": 0.975,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "15",-      "text": "VDD",-      "x": 4.55,-      "y": 0.325,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "16",-      "text": "GND",-      "x": 4.55,-      "y": -0.325,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "17",-      "text": "D3",-      "x": 4.55,-      "y": -0.975,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "18",-      "text": "D2",-      "x": 4.55,-      "y": -1.625,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "19",-      "text": "D1",-      "x": 4.55,-      "y": -2.275,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "20",-      "text": "D0",-      "x": 4.55,-      "y": -2.925,-      "align": "left",-      "vertical": false,-      "h": 0.325-    }+ "spec": "adom-hero 1.4",+ "mpn": "AD9057BRSZ-80",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 20,+   "span_mm": 8.9,+   "dash_mm": 0.2225,+   "gap_mm": 0.1335,+   "pad_stroke_mm": 0.0534+  },+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 7,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }+  },+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 20,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "board_underside": true,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 0.712,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -3.9,+   3.9,+   -3.403,+   3.403+  ],+  "pads_bbox_mm": [+   -4.45,+   4.45,+   -3.125,+   3.125   ],-  "pads": [-    {-      "number": "1",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        -2.925-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "2",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        -2.275-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "3",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        -1.625-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "4",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        -0.975-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "5",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        -0.325-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "6",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        0.325-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "7",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        0.975-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "8",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        1.625-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "9",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        2.275-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "10",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        2.925-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "11",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        2.925-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "12",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        2.275-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "13",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        1.625-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "14",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        0.975-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "15",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        0.325-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "16",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        -0.325-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "17",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        -0.975-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "18",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        -1.625-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "19",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        -2.275-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "20",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        -2.925-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    }-  ]-}+  "seating_z_mm": 0.0+ },+ "sources": {+  "glb": "ad9057brsz-80-etched.glb",+  "glb_sha256": "f224ed1496883b9f9777e4e0dd4d081f0a8ec0e1ccd3af49568c92b440ed170d",+  "footprint": "ad9057brsz-80.kicad_mod",+  "footprint_sha256": "4cadf3dc99a77dece6aa99596e5cb28d02a841d6617b1db36e0744f5dfe0431f",+  "pins": "page.json component.pins",+  "pins_sha256": "e403a6dab3b15773fd1f485a59381ca258228a78d04360c9ccf34128da6d13ab"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "PWRDN",+   "x": -4.55,+   "y": -2.925,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "2",+   "text": "VREF OUT",+   "x": -4.55,+   "y": -2.275,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "3",+   "text": "VREF IN",+   "x": -4.55,+   "y": -1.625,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "4",+   "text": "GND",+   "x": -4.55,+   "y": -0.975,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "5",+   "text": "VD",+   "x": -4.55,+   "y": -0.325,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "6",+   "text": "BIAS OUT",+   "x": -4.55,+   "y": 0.325,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "7",+   "text": "AIN",+   "x": -4.55,+   "y": 0.975,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "8",+   "text": "VD",+   "x": -4.55,+   "y": 1.625,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "9",+   "text": "GND",+   "x": -4.55,+   "y": 2.275,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "10",+   "text": "ENCODE",+   "x": -4.55,+   "y": 2.925,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "11",+   "text": "D7",+   "x": 4.55,+   "y": 2.925,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "12",+   "text": "D6",+   "x": 4.55,+   "y": 2.275,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "13",+   "text": "D5",+   "x": 4.55,+   "y": 1.625,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "14",+   "text": "D4",+   "x": 4.55,+   "y": 0.975,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "15",+   "text": "VDD",+   "x": 4.55,+   "y": 0.325,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "16",+   "text": "GND",+   "x": 4.55,+   "y": -0.325,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "17",+   "text": "D3",+   "x": 4.55,+   "y": -0.975,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "18",+   "text": "D2",+   "x": 4.55,+   "y": -1.625,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "19",+   "text": "D1",+   "x": 4.55,+   "y": -2.275,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "20",+   "text": "D0",+   "x": 4.55,+   "y": -2.925,+   "align": "left",+   "vertical": false,+   "h": 0.325+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    -2.925+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    -2.275+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    -1.625+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "4",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    -0.975+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "5",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    -0.325+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "6",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    0.325+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "7",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    0.975+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "8",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    1.625+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "9",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    2.275+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "10",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    2.925+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "11",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    2.925+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "12",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    2.275+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "13",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    1.625+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "14",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    0.975+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "15",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    0.325+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "16",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    -0.325+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "17",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    -0.975+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "18",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    -1.625+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "19",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    -2.275+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "20",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    -2.925+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
ad9057brsz-80.kicad_sym+9−9
@@ -28,7 +28,7 @@       (name "VD" (effects (font (size 1.27 1.27))))       (number "5" (effects (font (size 1.27 1.27))))     )-    (pin passive line (at -17.78 -2.54 0) (length 5.08)+    (pin output line (at -17.78 -2.54 0) (length 5.08)       (name "BIAS OUT" (effects (font (size 1.27 1.27))))       (number "6" (effects (font (size 1.27 1.27))))     )@@ -48,19 +48,19 @@       (name "ENCODE" (effects (font (size 1.27 1.27))))       (number "10" (effects (font (size 1.27 1.27))))     )-    (pin tri_state line (at 17.78 10.16 180) (length 5.08)+    (pin output line (at 17.78 10.16 180) (length 5.08)       (name "D0" (effects (font (size 1.27 1.27))))       (number "20" (effects (font (size 1.27 1.27))))     )-    (pin tri_state line (at 17.78 7.62 180) (length 5.08)+    (pin output line (at 17.78 7.62 180) (length 5.08)       (name "D1" (effects (font (size 1.27 1.27))))       (number "19" (effects (font (size 1.27 1.27))))     )-    (pin tri_state line (at 17.78 5.08 180) (length 5.08)+    (pin output line (at 17.78 5.08 180) (length 5.08)       (name "D2" (effects (font (size 1.27 1.27))))       (number "18" (effects (font (size 1.27 1.27))))     )-    (pin tri_state line (at 17.78 2.54 180) (length 5.08)+    (pin output line (at 17.78 2.54 180) (length 5.08)       (name "D3" (effects (font (size 1.27 1.27))))       (number "17" (effects (font (size 1.27 1.27))))     )@@ -72,19 +72,19 @@       (name "VDD" (effects (font (size 1.27 1.27))))       (number "15" (effects (font (size 1.27 1.27))))     )-    (pin tri_state line (at 17.78 -5.08 180) (length 5.08)+    (pin output line (at 17.78 -5.08 180) (length 5.08)       (name "D4" (effects (font (size 1.27 1.27))))       (number "14" (effects (font (size 1.27 1.27))))     )-    (pin tri_state line (at 17.78 -7.62 180) (length 5.08)+    (pin output line (at 17.78 -7.62 180) (length 5.08)       (name "D5" (effects (font (size 1.27 1.27))))       (number "13" (effects (font (size 1.27 1.27))))     )-    (pin tri_state line (at 17.78 -10.16 180) (length 5.08)+    (pin output line (at 17.78 -10.16 180) (length 5.08)       (name "D6" (effects (font (size 1.27 1.27))))       (number "12" (effects (font (size 1.27 1.27))))     )-    (pin tri_state line (at 17.78 -12.70 180) (length 5.08)+    (pin output line (at 17.78 -12.70 180) (length 5.08)       (name "D7" (effects (font (size 1.27 1.27))))       (number "11" (effects (font (size 1.27 1.27))))     )
ad9057brsz-80.lbr+9−9
@@ -110,21 +110,21 @@   <pin name="VREF_IN" x="-17.78" y="5.08" length="middle" direction="pwr"/>   <pin name="GND" x="-17.78" y="2.54" length="middle" direction="pwr"/>   <pin name="VD" x="-17.78" y="0" length="middle" direction="pwr"/>-  <pin name="BIAS_OUT" x="-17.78" y="-2.54" length="middle" direction="pas"/>+  <pin name="BIAS_OUT" x="-17.78" y="-2.54" length="middle" direction="out"/>   <pin name="AIN" x="-17.78" y="-5.08" length="middle" direction="in"/>   <pin name="VD@2" x="-17.78" y="-7.62" length="middle" direction="pwr"/>   <pin name="GND@2" x="-17.78" y="-10.16" length="middle" direction="pwr"/>   <pin name="ENCODE" x="-17.78" y="-12.7" length="middle" direction="in"/>-  <pin name="D0" x="17.78" y="10.16" length="middle" direction="hiz" rot="R180"/>-  <pin name="D1" x="17.78" y="7.62" length="middle" direction="hiz" rot="R180"/>-  <pin name="D2" x="17.78" y="5.08" length="middle" direction="hiz" rot="R180"/>-  <pin name="D3" x="17.78" y="2.54" length="middle" direction="hiz" rot="R180"/>+  <pin name="D0" x="17.78" y="10.16" length="middle" direction="out" rot="R180"/>+  <pin name="D1" x="17.78" y="7.62" length="middle" direction="out" rot="R180"/>+  <pin name="D2" x="17.78" y="5.08" length="middle" direction="out" rot="R180"/>+  <pin name="D3" x="17.78" y="2.54" length="middle" direction="out" rot="R180"/>   <pin name="GND@3" x="17.78" y="0" length="middle" direction="pwr" rot="R180"/>   <pin name="VDD" x="17.78" y="-2.54" length="middle" direction="pwr" rot="R180"/>-  <pin name="D4" x="17.78" y="-5.08" length="middle" direction="hiz" rot="R180"/>-  <pin name="D5" x="17.78" y="-7.62" length="middle" direction="hiz" rot="R180"/>-  <pin name="D6" x="17.78" y="-10.16" length="middle" direction="hiz" rot="R180"/>-  <pin name="D7" x="17.78" y="-12.7" length="middle" direction="hiz" rot="R180"/>+  <pin name="D4" x="17.78" y="-5.08" length="middle" direction="out" rot="R180"/>+  <pin name="D5" x="17.78" y="-7.62" length="middle" direction="out" rot="R180"/>+  <pin name="D6" x="17.78" y="-10.16" length="middle" direction="out" rot="R180"/>+  <pin name="D7" x="17.78" y="-12.7" length="middle" direction="out" rot="R180"/> </symbol> </symbols> <devicesets>
package.json+36−36
@@ -1,6 +1,6 @@ {   "slug": "ad9057brsz-80",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Analog Devices Analog To Digital Converters (ADCs), SSOP-20-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -54,7 +54,7 @@       "mouser": "584-AD9057BRSZ-80"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:58:38Z",+      "checked_at": "2026-11-12T07:58:15Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "AD9057BRSZ-80-ND",@@ -70,121 +70,121 @@         "number": "1",         "name": "PWRDN",         "type": "input",-        "description": "Power-down select; logic high enters power-down mode (digital outputs go to high impedance), and the pin should be tied to ground if power-down is not used."+        "description": "Power-down select: logic high puts the ADC into power-down mode and drives the digital outputs to high impedance, and Pin 1 should be tied to ground if power-down is not used."       },       {         "number": "2",         "name": "VREF OUT",         "type": "power_in",-        "description": "Internal 2.5 V (typ) reference output; bypass with 0.1 µF to ground."+        "description": "Internal 2.5 V (typ) reference output that should be bypassed with 0.1 µF to ground and can provide 300 mA of drive current for DC biasing."       },       {         "number": "3",         "name": "VREF IN",         "type": "power_in",-        "description": "Reference input for the ADC, 2.5 V typ ±10%."+        "description": "Reference input for the ADC at 2.5 V typical (±10%), which can be driven by an external reference with VREF OUT disconnected."       },       {         "number": "4",         "name": "GND",         "type": "power_in",-        "description": "Ground (analog/digital)."+        "description": "Analog and digital ground."       },       {         "number": "5",         "name": "VD",         "type": "power_in",-        "description": "Analog 5 V power supply."+        "description": "Analog 5 V power supply for the ADC (VD = 5 V ±5% in the stated test conditions)."       },       {         "number": "6",         "name": "BIAS OUT",-        "type": "passive",-        "description": "Bias pin for AC coupling, connected through an internal 1 kΩ resistor to REF IN."+        "type": "output",+        "description": "Bias pin for AC coupling, connected to VREF IN through the internal 1 kΩ (±20%) bias resistor."       },       {         "number": "7",         "name": "AIN",         "type": "input",-        "description": "Analog input for the ADC, 1 V p-p range centered at 2.5 V."+        "description": "Single-ended analog input with a 1.0 V p-p input range centered at 2.5 V and 150 kΩ input resistance."       },       {         "number": "8",         "name": "VD",         "type": "power_in",-        "description": "Analog 5 V power supply."+        "description": "Analog 5 V power supply for the ADC (second VD pin, same net as Pin 5)."       },       {         "number": "9",         "name": "GND",         "type": "power_in",-        "description": "Ground (analog/digital)."+        "description": "Analog and digital ground (second GND pin, same net as Pin 4)."       },       {         "number": "10",         "name": "ENCODE",         "type": "input",-        "description": "Encode clock for the ADC, TTL/CMOS compatible; the ADC samples on the rising edge."+        "description": "TTL/CMOS-compatible encode clock; the ADC samples on the rising edge of ENCODE, with encode pulsewidth high and low of at least 5.5 ns at 80 MSPS."       },       {         "number": "11",         "name": "D7",-        "type": "tri_state",-        "description": "Digital output bit 7 (MSB) of the ADC; goes high impedance in power-down."+        "type": "output",+        "description": "Digital output bit 7, the MSB, in offset binary code; goes to high impedance in power-down mode."       },       {         "number": "12",         "name": "D6",-        "type": "tri_state",-        "description": "Digital output bit 6 of the ADC; goes high impedance in power-down."+        "type": "output",+        "description": "Digital output bit 6 in offset binary code; goes to high impedance in power-down mode."       },       {         "number": "13",         "name": "D5",-        "type": "tri_state",-        "description": "Digital output bit 5 of the ADC; goes high impedance in power-down."+        "type": "output",+        "description": "Digital output bit 5 in offset binary code; goes to high impedance in power-down mode."       },       {         "number": "14",         "name": "D4",-        "type": "tri_state",-        "description": "Digital output bit 4 of the ADC; goes high impedance in power-down."+        "type": "output",+        "description": "Digital output bit 4 in offset binary code; goes to high impedance in power-down mode."       },       {         "number": "15",         "name": "VDD",         "type": "power_in",-        "description": "Digital output power supply, nominally 3 V to 5 V."+        "description": "Digital output power supply, nominally 3 V to 5 V and isolated from the analog VD supply."       },       {         "number": "16",         "name": "GND",         "type": "power_in",-        "description": "Ground (analog/digital)."+        "description": "Ground (third GND pin on the package)."       },       {         "number": "17",         "name": "D3",-        "type": "tri_state",-        "description": "Digital output bit 3 of the ADC; goes high impedance in power-down."+        "type": "output",+        "description": "Digital output bit 3 in offset binary code; goes to high impedance in power-down mode."       },       {         "number": "18",         "name": "D2",-        "type": "tri_state",-        "description": "Digital output bit 2 of the ADC; goes high impedance in power-down."+        "type": "output",+        "description": "Digital output bit 2 in offset binary code; goes to high impedance in power-down mode."       },       {         "number": "19",         "name": "D1",-        "type": "tri_state",-        "description": "Digital output bit 1 of the ADC; goes high impedance in power-down."+        "type": "output",+        "description": "Digital output bit 1 in offset binary code; goes to high impedance in power-down mode."       },       {         "number": "20",         "name": "D0",-        "type": "tri_state",-        "description": "Digital output bit 0 (LSB) of the ADC; goes high impedance in power-down."+        "type": "output",+        "description": "Digital output bit 0, the LSB, in offset binary code; goes to high impedance in power-down mode."       }     ],     "provenance": {@@ -192,17 +192,17 @@       "factory_chain": {         "factory": "2.0.0",         "extractor": "extract_pins 0.3",-        "primary_model": "claude-sonnet-5-5",+        "primary_model": "claude-haiku-5-5",         "primary_mode": "text",         "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The datasheet lists AD9057BRS-80 in the RS-20 SSOP package. The exact MPN AD9057BRSZ-80 (Pb-free suf; Pin types are my own choices and are not stated in the datasheet. D7–D0 are set to tri_state because; The datasheet package outline gives a body width of 5.00–5.60 mm, which matches a 208 mil SSOP. The "+          "extractor flagged: The MPN given is AD9057BRSZ-80, but the datasheet ordering guide lists AD9057BRS-80 (RS-20 SSOP). Th; The datasheet does not state the '208mil' width from the package hint. It gives only 'Shrink Small O; Digital output pins D7–D0 are given as ranges (11–14, 17–20). The per-pin bit mapping comes from the"         ],         "pages_sent": 12,-        "cost_usd": 0.1474,-        "at": "2026-11-12T04:58:13"+        "cost_usd": 0.0819,+        "at": "2026-11-12T07:57:44"       },       "datasheet": {         "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/AD9057.pdf",@@ -257,7 +257,7 @@         "zmin_mm": 0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "1999944b0b0ae6274d41b1d6307082cd2d9b67e51436516845fa69549df133a9",+        "sha256": "a976d974fd9b14168cb4a1a37dbafcbab01c33b38d24074e1e23cf4770677830",         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }
page.json+39−37
@@ -4,7 +4,7 @@   "slug": "ad9057brsz-80",   "title": "AD9057BRSZ-80",   "brief": "Analog Devices Analog To Digital Converters (ADCs), SSOP-20-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -36,7 +36,7 @@       "mouser": "584-AD9057BRSZ-80"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:58:38Z",+      "checked_at": "2026-11-12T07:58:15Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "AD9057BRSZ-80-ND",@@ -52,121 +52,121 @@         "number": "1",         "name": "PWRDN",         "type": "input",-        "description": "Power-down select; logic high enters power-down mode (digital outputs go to high impedance), and the pin should be tied to ground if power-down is not used."+        "description": "Power-down select: logic high puts the ADC into power-down mode and drives the digital outputs to high impedance, and Pin 1 should be tied to ground if power-down is not used."       },       {         "number": "2",         "name": "VREF OUT",         "type": "power_in",-        "description": "Internal 2.5 V (typ) reference output; bypass with 0.1 µF to ground."+        "description": "Internal 2.5 V (typ) reference output that should be bypassed with 0.1 µF to ground and can provide 300 mA of drive current for DC biasing."       },       {         "number": "3",         "name": "VREF IN",         "type": "power_in",-        "description": "Reference input for the ADC, 2.5 V typ ±10%."+        "description": "Reference input for the ADC at 2.5 V typical (±10%), which can be driven by an external reference with VREF OUT disconnected."       },       {         "number": "4",         "name": "GND",         "type": "power_in",-        "description": "Ground (analog/digital)."+        "description": "Analog and digital ground."       },       {         "number": "5",         "name": "VD",         "type": "power_in",-        "description": "Analog 5 V power supply."+        "description": "Analog 5 V power supply for the ADC (VD = 5 V ±5% in the stated test conditions)."       },       {         "number": "6",         "name": "BIAS OUT",-        "type": "passive",-        "description": "Bias pin for AC coupling, connected through an internal 1 kΩ resistor to REF IN."+        "type": "output",+        "description": "Bias pin for AC coupling, connected to VREF IN through the internal 1 kΩ (±20%) bias resistor."       },       {         "number": "7",         "name": "AIN",         "type": "input",-        "description": "Analog input for the ADC, 1 V p-p range centered at 2.5 V."+        "description": "Single-ended analog input with a 1.0 V p-p input range centered at 2.5 V and 150 kΩ input resistance."       },       {         "number": "8",         "name": "VD",         "type": "power_in",-        "description": "Analog 5 V power supply."+        "description": "Analog 5 V power supply for the ADC (second VD pin, same net as Pin 5)."       },       {         "number": "9",         "name": "GND",         "type": "power_in",-        "description": "Ground (analog/digital)."+        "description": "Analog and digital ground (second GND pin, same net as Pin 4)."       },       {         "number": "10",         "name": "ENCODE",         "type": "input",-        "description": "Encode clock for the ADC, TTL/CMOS compatible; the ADC samples on the rising edge."+        "description": "TTL/CMOS-compatible encode clock; the ADC samples on the rising edge of ENCODE, with encode pulsewidth high and low of at least 5.5 ns at 80 MSPS."       },       {         "number": "11",         "name": "D7",-        "type": "tri_state",-        "description": "Digital output bit 7 (MSB) of the ADC; goes high impedance in power-down."+        "type": "output",+        "description": "Digital output bit 7, the MSB, in offset binary code; goes to high impedance in power-down mode."       },       {         "number": "12",         "name": "D6",-        "type": "tri_state",-        "description": "Digital output bit 6 of the ADC; goes high impedance in power-down."+        "type": "output",+        "description": "Digital output bit 6 in offset binary code; goes to high impedance in power-down mode."       },       {         "number": "13",         "name": "D5",-        "type": "tri_state",-        "description": "Digital output bit 5 of the ADC; goes high impedance in power-down."+        "type": "output",+        "description": "Digital output bit 5 in offset binary code; goes to high impedance in power-down mode."       },       {         "number": "14",         "name": "D4",-        "type": "tri_state",-        "description": "Digital output bit 4 of the ADC; goes high impedance in power-down."+        "type": "output",+        "description": "Digital output bit 4 in offset binary code; goes to high impedance in power-down mode."       },       {         "number": "15",         "name": "VDD",         "type": "power_in",-        "description": "Digital output power supply, nominally 3 V to 5 V."+        "description": "Digital output power supply, nominally 3 V to 5 V and isolated from the analog VD supply."       },       {         "number": "16",         "name": "GND",         "type": "power_in",-        "description": "Ground (analog/digital)."+        "description": "Ground (third GND pin on the package)."       },       {         "number": "17",         "name": "D3",-        "type": "tri_state",-        "description": "Digital output bit 3 of the ADC; goes high impedance in power-down."+        "type": "output",+        "description": "Digital output bit 3 in offset binary code; goes to high impedance in power-down mode."       },       {         "number": "18",         "name": "D2",-        "type": "tri_state",-        "description": "Digital output bit 2 of the ADC; goes high impedance in power-down."+        "type": "output",+        "description": "Digital output bit 2 in offset binary code; goes to high impedance in power-down mode."       },       {         "number": "19",         "name": "D1",-        "type": "tri_state",-        "description": "Digital output bit 1 of the ADC; goes high impedance in power-down."+        "type": "output",+        "description": "Digital output bit 1 in offset binary code; goes to high impedance in power-down mode."       },       {         "number": "20",         "name": "D0",-        "type": "tri_state",-        "description": "Digital output bit 0 (LSB) of the ADC; goes high impedance in power-down."+        "type": "output",+        "description": "Digital output bit 0, the LSB, in offset binary code; goes to high impedance in power-down mode."       }     ],     "provenance": {@@ -174,17 +174,17 @@       "factory_chain": {         "factory": "2.0.0",         "extractor": "extract_pins 0.3",-        "primary_model": "claude-sonnet-5-5",+        "primary_model": "claude-haiku-5-5",         "primary_mode": "text",         "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The datasheet lists AD9057BRS-80 in the RS-20 SSOP package. The exact MPN AD9057BRSZ-80 (Pb-free suf; Pin types are my own choices and are not stated in the datasheet. D7–D0 are set to tri_state because; The datasheet package outline gives a body width of 5.00–5.60 mm, which matches a 208 mil SSOP. The "+          "extractor flagged: The MPN given is AD9057BRSZ-80, but the datasheet ordering guide lists AD9057BRS-80 (RS-20 SSOP). Th; The datasheet does not state the '208mil' width from the package hint. It gives only 'Shrink Small O; Digital output pins D7–D0 are given as ranges (11–14, 17–20). The per-pin bit mapping comes from the"         ],         "pages_sent": 12,-        "cost_usd": 0.1474,-        "at": "2026-11-12T04:58:13"+        "cost_usd": 0.0819,+        "at": "2026-11-12T07:57:44"       },       "datasheet": {         "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/AD9057.pdf",@@ -239,7 +239,7 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "1999944b0b0ae6274d41b1d6307082cd2d9b67e51436516845fa69549df133a9",+        "sha256": "a976d974fd9b14168cb4a1a37dbafcbab01c33b38d24074e1e23cf4770677830",         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }@@ -959,5 +959,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "Analog Devices Analog To Digital Converters (ADCs), SSOP-20-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file