component
AD8692ARMZ-REEL
Public Made by Adomby adom
Analog Devices Low Noise Amplifiers (LNA) - RF, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 8d ago |
| viewers | 8d ago |
| ad8692armz-reel-etched.glb | 8d ago |
| ad8692armz-reel-etched.step | 8d ago |
| ad8692armz-reel-hero.glb | 8d ago |
| ad8692armz-reel-hero.overlay.json | 8d ago |
| ad8692armz-reel.glb | 8d ago |
| ad8692armz-reel.kicad_mod | 8d ago |
| ad8692armz-reel.kicad_sym | 8d ago |
| ad8692armz-reel.lbr | 8d ago |
| ad8692armz-reel.step | 8d ago |
| package.json | 8d ago |
| page.json | 8d ago |
| README.md | 8d ago |
AD8692ARMZ-REEL
Analog Devices · Low Noise Amplifiers (LNA) - RF · MSOP-8
AD8692ARMZ-REEL from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Output of amplifier A, which swings to within about 40 mV of the rails at 1 mA load at 2.7 V supply (VOL 25 to 40 mV typical), per the electrical characteristics. |
| 2 | -IN A | input | Inverting input of amplifier A; the common-mode input range is -0.3 V to +1.6 V at 2.7 V supply and -0.3 V to +3.9 V at 5 V supply. |
| 3 | +IN A | input | Non-inverting input of amplifier A; the common-mode input range is -0.3 V to +1.6 V at 2.7 V supply and -0.3 V to +3.9 V at 5 V supply. |
| 4 | V- | power_in | Negative supply pin; the part is specified for single-supply operation from 2.7 V to 6 V (absolute maximum supply 6 V). |
| 5 | +IN B | input | Non-inverting input of amplifier B; the common-mode input range is -0.3 V to +1.6 V at 2.7 V supply and -0.3 V to +3.9 V at 5 V supply. |
| 6 | -IN B | input | Inverting input of amplifier B; the common-mode input range is -0.3 V to +1.6 V at 2.7 V supply and -0.3 V to +3.9 V at 5 V supply. |
| 7 | OUT B | output | Output of amplifier B, which swings to within about 40 mV of the rails at 1 mA load at 2.7 V supply (VOL 25 to 40 mV typical), per the electrical characteristics. |
| 8 | V+ | power_in | Positive supply pin; the part is specified for single-supply operation from 2.7 V to 6 V (absolute maximum supply 6 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | RF And Wireless |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Offset voltage | VOS | 0.4 | 2 | mV | VCM = −0.3 V 至 +1.6 V | 3 | |
| Offset voltage | VOS | 3 | mV | VCM = −0.1 V 至 +1.6 V; −40°C < TA < +125°C | 3 | ||
| Input bias current | IB | 0.2 | 1 | pA | 3 | ||
| Input bias current | IB | 50 | pA | −40°C < TA < +85°C | 3 | ||
| Input bias current | IB | 260 | pA | −40°C < TA < +125°C | 3 | ||
| Input offset current | IOS | 0.1 | 0.5 | pA | 3 | ||
| Input offset current | IOS | 20 | pA | −40°C < TA < +85°C | 3 | ||
| Input offset current | IOS | 75 | pA | −40°C < TA < +125°C | 3 | ||
| Input voltage range | -0.3 | 1.6 | V | 3 | |||
| Common-mode rejection ratio | CMRR | 68 | 90 | dB | VCM = −0.3 V 至 +1.6 V | 3 | |
| Common-mode rejection ratio | CMRR | 60 | 85 | dB | VCM = −0.1 V 至 +1.6 V; −40°C < TA < +125°C | 3 | |
| Large-signal voltage gain (AD8691/AD8692) | AVO | 90 | 250 | V/mV | RL = 2 kΩ, VO = 0.5 V 至 2.2 V | 3 | |
| Offset voltage drift (AD8692/AD8694) | ∆VOS/∆T | 1.3 | 6 | µV/°C | 3 | ||
| High output voltage | VOH | 2.64 | 2.66 | V | IL = 1 mA | 3 | |
| High output voltage | VOH | 2.6 | V | −40°C < TA < +125°C | 3 | ||
| Low output voltage | VOL | 25 | 40 | mV | IL = 1 mA | 3 | |
| Low output voltage | VOL | 60 | mV | −40°C < TA < +125°C | 3 | ||
| Short-circuit current | ISC | -20 | 20 | mA | 3 | ||
| Power supply rejection ratio | PSRR | 80 | 95 | dB | VS = 2.7 V 至 5.5 V | 3 | |
| Power supply rejection ratio | PSRR | 75 | 95 | dB | −40°C < TA < +125°C | 3 | |
| Supply current per amplifier | ISY | 0.85 | 0.95 | mA | VO = 0 V | 3 | |
| Supply current per amplifier | ISY | 1.2 | mA | −40°C < TA < +125°C | 3 | ||
| Voltage noise, peak-to-peak | en p-p | 1.6 | 3 | µV p-p | f = 0.1 Hz 至 10 Hz | 3 | |
| Voltage noise density | en | 8 | 12 | nV/√Hz | f = 1 kHz | 3 | |
| Offset voltage | VOS | 0.4 | 2 | mV | VCM = −0.3 V 至 +3.9 V | 4 | |
| Offset voltage | VOS | 3 | mV | VCM = −0.1 V 至 +3.9 V; −40°C < TA < +125°C | 4 | ||
| Input bias current | IB | 0.2 | 1 | pA | 4 | ||
| Input bias current | IB | 50 | pA | −40°C < TA < +85°C | 4 | ||
| Input bias current | IB | 260 | pA | −40°C < TA < +125°C | 4 | ||
| Input offset current | IOS | 0.1 | 0.5 | pA | 4 | ||
| Input offset current | IOS | 20 | pA | −40°C < TA < +85°C | 4 | ||
| Input offset current | IOS | 75 | pA | −40°C < TA < +125°C | 4 | ||
| Input voltage range | -0.3 | 3.9 | V | 4 | |||
| Common-mode rejection ratio | CMRR | 70 | 95 | dB | VCM = −0.3 V 至 +3.9 V | 4 | |
| Common-mode rejection ratio | CMRR | 67 | 95 | dB | VCM = −0.1 V 至 +3.9 V; −40°C < TA < +125°C | 4 | |
| Large-signal voltage gain (AD8691/AD8692) | AVO | 250 | 2000 | V/mV | VO = 0.5 V 至 4.5 V, RL = 2 kΩ, VCM = 0 V | 4 | |
| Offset voltage drift (AD8692/AD8694) | ∆VOS/∆T | 1.3 | 6 | µV/°C | 4 | ||
| High output voltage | VOH | 4.96 | 4.98 | V | IL = 1 mA | 4 | |
| High output voltage | VOH | 4.7 | 4.78 | V | IL = 10 mA | 4 | |
| High output voltage | VOH | 4.6 | V | −40°C 至 +125°C | 4 | ||
| Low output voltage | VOL | 20 | 40 | mV | IL = 1 mA | 4 | |
| Low output voltage (AD8691/AD8692) | VOL | 165 | 210 | mV | IL = 10 mA | 4 | |
| Low output voltage (AD8691/AD8692) | VOL | 290 | mV | −40°C 至 +125°C | 4 | ||
| Short-circuit current | ISC | -80 | 80 | mA | 4 | ||
| Power supply rejection ratio | PSRR | 80 | 95 | dB | VS = 2.7 V 至 5.5 V | 4 | |
| Power supply rejection ratio | PSRR | 75 | 95 | dB | −40°C < TA < +125°C | 4 | |
| Supply current per amplifier | ISY | 0.95 | 1.05 | mA | VO = 0 V | 4 | |
| Supply current per amplifier | ISY | 1.3 | mA | −40°C < TA < +125°C | 4 | ||
| Voltage noise, peak-to-peak | en p-p | 1.6 | 3 | µV p-p | f = 0.1 Hz to 10 Hz | 4 | |
| Voltage noise density | en | 8 | 12 | nV/√Hz | f = 1 kHz | 4 | |
| Supply voltage (single supply) | 2.7 | 6 | V | 单电源供电 | 1 | ||
| Power supply voltage | 6 | V | 5 | ||||
| Differential input voltage | -6 | 6 | V | 5 | |||
| Operating temperature range | -40 | 125 | °C | 5 | |||
| Storage temperature range | -65 | 150 | °C | 5 | |||
| Junction temperature range | -65 | 150 | °C | 5 | |||
| Lead temperature (soldering) | 300 | °C | 焊接，60秒 | 5 | |||
| Thermal resistance, junction-to-ambient (8-lead MSOP RM-8) | θJA | 210 | °C/W | θJA针对最差条件；器件焊接在电路板上 | 5 | ||
| Thermal resistance, junction-to-case (8-lead MSOP RM-8) | θJC | 45 | °C/W | 5 | |||
| Gain bandwidth product | GBP | 10 | MHz | 3 |
CAD (KiCad official)
- Symbol:
AD8692ARMZ-REEL - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ad8692armz-reel-etched.step/ad8692armz-reel-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad8692armz-reel.step/ad8692armz-reel.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
fa832cc26b9cfb76, retrieved 2026-10-21, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).