component
AD8656ARZ-REEL7
Public Made by Adomby adom
Analog Devices Precision Op Amps, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 11d ago |
| viewers | 11d ago |
| ad8656arz-reel7-etched.glb | 11d ago |
| ad8656arz-reel7-etched.step | 11d ago |
| ad8656arz-reel7-hero.glb | 11d ago |
| ad8656arz-reel7-hero.overlay.json | 11d ago |
| ad8656arz-reel7.glb | 11d ago |
| ad8656arz-reel7.kicad_mod | 11d ago |
| ad8656arz-reel7.kicad_sym | 11d ago |
| ad8656arz-reel7.lbr | 11d ago |
| ad8656arz-reel7.step | 11d ago |
| package.json | 11d ago |
| page.json | 11d ago |
| README.md | 11d ago |
AD8656ARZ-REEL7
Analog Devices · Precision Op Amps · SOIC-8
AD8656ARZ-REEL7 from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Output of amplifier A; the datasheet specifies a short-circuit to ground duration of indefinite (absolute maximum ratings table). |
| 2 | -IN A | input | Inverting input of amplifier A; input voltage should not exceed the supply rails by more than 0.3 V, and input current should be limited to below 5 mA using a series resistor if higher voltages are applied. |
| 3 | +IN A | input | Non-inverting input of amplifier A; the input common-mode range spans the full supply range (rail-to-rail input), with the same 0.3 V over-voltage and 5 mA input current limits as -IN A. |
| 4 | V- | power_in | Negative supply rail; the absolute maximum total supply voltage is 6 V and the operating supply range is stated as 2.7 V to 5.5 V in the features section. |
| 5 | +IN B | input | Non-inverting input of amplifier B; the input common-mode range spans the full supply range (rail-to-rail input), with the same 0.3 V over-voltage and 5 mA input current limits as the other inputs. |
| 6 | -IN B | input | Inverting input of amplifier B; input voltage should not exceed the supply rails by more than 0.3 V, and input current should be limited to below 5 mA using a series resistor if higher voltages are applied. |
| 7 | OUT B | output | Output of amplifier B; the datasheet specifies a short-circuit to ground duration of indefinite (absolute maximum ratings table). |
| 8 | V+ | power_in | Positive supply rail; the absolute maximum total supply voltage is 6 V and the operating supply range is stated as 2.7 V to 5.5 V in the features section. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | 50 | 250 | µV | VS = 5.0 V; VCM = 0 V to 5 V | 3 | |
| Input offset voltage over temperature | VOS | 550 | µV | VS = 5.0 V; -40°C ≤ TA ≤ +125°C | 3 | ||
| Input offset voltage drift | ΔVOS/ΔT | 0.4 | 2.3 | µV/°C | VS = 5.0 V; -40°C ≤ TA ≤ +125°C | 3 | |
| Input bias current | IB | 1 | 10 | pA | VS = 5.0 V | 3 | |
| Input bias current over temperature | IB | 500 | pA | VS = 5.0 V; -40°C ≤ TA ≤ +125°C | 3 | ||
| Input offset current over temperature | IOS | 500 | pA | VS = 5.0 V; -40°C ≤ TA ≤ +125°C | 3 | ||
| Input voltage range | 0 | 5 | V | VS = 5.0 V | 3 | ||
| Common-mode rejection ratio | CMRR | 85 | 100 | dB | VS = 5.0 V; VCM = 0 V to 5 V | 3 | |
| Large-signal voltage gain | AVO | 100 | 110 | dB | VS = 5.0 V; VO = 0.2 V to 4.8 V, RL = 10 kΩ, VCM = 0 V | 3 | |
| Large-signal voltage gain over temperature | AVO | 95 | dB | VS = 5.0 V; RL = 10 kΩ; -40°C ≤ TA ≤ +125°C | 3 | ||
| High output voltage | VOH | 4.97 | 4.991 | V | VS = 5.0 V; IL = 1 mA; -40°C ≤ TA ≤ +125°C | 3 | |
| Low output voltage | VOL | 8 | 30 | mV | VS = 5.0 V; IL = 1 mA; -40°C ≤ TA ≤ +125°C | 3 | |
| Output current | IOUT | -220 | 220 | mA | VS = 5.0 V; VOUT = ±0.5 V | 3 | |
| Power supply rejection ratio | PSRR | 88 | 105 | dB | VS = 2.7 V to 5.0 V | 3 | |
| Supply current per amplifier | ISY | 3.7 | 4.5 | mA | VS = 5.0 V; VO = 0 V | 3 | |
| Supply current per amplifier over temperature | ISY | 5.3 | mA | VS = 5.0 V; -40°C ≤ TA ≤ +125°C | 3 | ||
| Input offset voltage | VOS | 44 | 250 | µV | VS = 2.7 V; VCM = 0 V to 2.7 V | 4 | |
| Input offset voltage over temperature | VOS | 550 | µV | VS = 2.7 V; -40°C ≤ TA ≤ +125°C | 4 | ||
| Input offset voltage drift | ΔVOS/ΔT | 0.4 | 2 | µV/°C | VS = 2.7 V; -40°C ≤ TA ≤ +125°C | 4 | |
| Input bias current | IB | 1 | 10 | pA | VS = 2.7 V | 4 | |
| Input bias current over temperature | IB | 500 | pA | VS = 2.7 V; -40°C ≤ TA ≤ +125°C | 4 | ||
| Input offset current over temperature | IOS | 500 | pA | VS = 2.7 V; -40°C ≤ TA ≤ +125°C | 4 | ||
| Input voltage range | 0 | 2.7 | V | VS = 2.7 V | 4 | ||
| Common-mode rejection ratio | CMRR | 80 | 98 | dB | VS = 2.7 V; VCM = 0 V to 2.7 V | 4 | |
| Large-signal voltage gain over temperature | AVO | 90 | dB | VS = 2.7 V; VO = 0.2 V to 2.5 V, RL = 10 kΩ, VCM = 0 V; -40°C ≤ TA ≤ +125°C | 4 | ||
| High output voltage | VOH | 2.67 | 2.688 | V | VS = 2.7 V; IL = 1 mA; -40°C ≤ TA ≤ +125°C | 4 | |
| Low output voltage | VOL | 10 | 30 | mV | VS = 2.7 V; IL = 1 mA; -40°C ≤ TA ≤ +125°C | 4 | |
| Output current | IOUT | -75 | 75 | mA | VS = 2.7 V; VOUT = ±0.5 V | 4 | |
| Power supply rejection ratio | PSRR | 88 | 105 | dB | VS = 2.7 V to 5.0 V | 4 | |
| Supply current per amplifier | ISY | 3.7 | 4.5 | mA | VS = 2.7 V; VO = 0 V | 4 | |
| Supply current per amplifier over temperature | ISY | 5.3 | mA | VS = 2.7 V; -40°C ≤ TA ≤ +125°C | 4 | ||
| Supply voltage | VS | 6 | V | 5 | |||
| Differential input voltage | -6 | 6 | V | 5 | |||
| Storage temperature range (R, RM packages) | -65 | 150 | °C | 5 | |||
| Junction temperature range (R, RM packages) | -65 | 150 | °C | 5 | |||
| Pin temperature (soldering, 10 s) | 260 | °C | 10 s soldering | 5 | |||
| Thermal resistance junction-to-ambient, 8-lead SOIC (R) | θJA | 158 | °C/W | Worst case, device soldered to circuit board for surface-mount package | 5 | ||
| Thermal resistance junction-to-case, 8-lead SOIC (R) | θJC | 43 | °C/W | 5 | |||
| Supply voltage operating range | VS | 2.7 | 5.5 | V | Operating voltage range (features list) | 1 | |
| Operating temperature range | TA | -40 | 125 | °C | Rated temperature range | 1 |
CAD (KiCad official)
- Symbol:
AD8656ARZ-REEL7 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ad8656arz-reel7-etched.step/ad8656arz-reel7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad8656arz-reel7.step/ad8656arz-reel7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
19a93f92565b289a, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).