Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

AD8628ARZ-REEL7

Analog Devices · Precision Op Amps · SOIC-8

AD8628ARZ-REEL7 from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No-connect pin, marked NC in Figure 2 of the datasheet, so it is not used by the amplifier.
2 -IN input Inverting input of the amplifier; the common-mode input range is 0 V to 5 V with VS = 5 V (Table 1).
3 +IN input Non-inverting input of the amplifier; the common-mode input range is 0 V to 5 V with VS = 5 V (Table 1).
4 V- power_in Negative supply rail; the part operates from 2.7 V to 5 V single supply, or ±1.35 V to ±2.5 V dual supply.
5 NC unconnected No-connect pin, marked NC in Figure 2 of the datasheet, so it is not used by the amplifier.
6 OUT output Amplifier output with rail-to-rail swing; short-circuit limit is ±25 mA typical and output current is ±30 mA at 25 °C (Table 1).
7 V+ power_in Positive supply rail; the part operates from 2.7 V to 5 V single supply, or ±1.35 V to ±2.5 V dual supply.
8 NC unconnected No-connect pin, marked NC in Figure 2 of the datasheet, so it is not used by the amplifier.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Offset Voltage (VS=5.0 V) VOS 1 5 µV 4
Offset Voltage (VS=5.0 V) VOS 10 µV −40°C ≤ TA ≤ +125°C 4
Input Bias Current (VS=5.0 V) IB 30 100 pA AD8628/AD8629 4
Input Bias Current (VS=5.0 V) IB 1.5 nA −40°C ≤ TA ≤ +125°C 4
Input Offset Current (VS=5.0 V) IOS 50 200 pA 4
Input Offset Current (VS=5.0 V) IOS 250 pA −40°C ≤ TA ≤ +125°C 4
Input Voltage Range (VS=5.0 V) 0 5 V 4
Common-Mode Rejection Ratio (VS=5.0 V) CMRR 120 140 dB VCM = 0 V to 5 V 4
Common-Mode Rejection Ratio (VS=5.0 V) CMRR 115 130 dB −40°C ≤ TA ≤ +125°C 4
Large Signal Voltage Gain (VS=5.0 V) AVO 125 145 dB RL = 10 kΩ, VO = 0.3 V to 4.7 V 4
Large Signal Voltage Gain (VS=5.0 V) AVO 120 135 dB −40°C ≤ TA ≤ +125°C 4
Offset Voltage Drift (VS=5.0 V) ∆VOS/∆T 0.002 0.02 µV/°C −40°C ≤ TA ≤ +125°C 4
Output Voltage High (VS=5.0 V) VOH 4.99 4.996 V RL = 100 kΩ to ground 4
Output Voltage High (VS=5.0 V) VOH 4.99 4.995 V −40°C ≤ TA ≤ +125°C 4
Output Voltage High (VS=5.0 V) VOH 4.95 4.98 V RL = 10 kΩ to ground 4
Output Voltage High (VS=5.0 V) VOH 4.95 4.97 V −40°C ≤ TA ≤ +125°C 4
Output Voltage Low (VS=5.0 V) VOL 1 5 mV RL = 100 kΩ to V+ 4
Output Voltage Low (VS=5.0 V) VOL 2 5 mV −40°C ≤ TA ≤ +125°C 4
Output Voltage Low (VS=5.0 V) VOL 10 20 mV RL = 10 kΩ to V+ 4
Output Voltage Low (VS=5.0 V) VOL 15 20 mV −40°C ≤ TA ≤ +125°C 4
Short-Circuit Limit (VS=5.0 V) ISC 25 50 mA 4
Short-Circuit Limit (VS=5.0 V) ISC 40 mA −40°C ≤ TA ≤ +125°C 4
Output Current (VS=5.0 V) IO 30 mA 4
Output Current (VS=5.0 V) IO 15 mA −40°C ≤ TA ≤ +125°C 4
Power Supply Rejection Ratio (VS=5.0 V) PSRR 115 130 dB VS = 2.7 V to 5.5 V, −40°C ≤ TA ≤ +125°C 4
Supply Current per Amplifier (VS=5.0 V) ISY 0.85 1.1 mA VO = VS/2 4
Supply Current per Amplifier (VS=5.0 V) ISY 1 1.2 mA −40°C ≤ TA ≤ +125°C 4
Offset Voltage (VS=2.7 V) VOS 1 5 µV 5
Offset Voltage (VS=2.7 V) VOS 10 µV −40°C ≤ TA ≤ +125°C 5
Input Bias Current (VS=2.7 V) IB 30 100 pA AD8628/AD8629 5
Input Bias Current (VS=2.7 V) IB 1 1.5 nA −40°C ≤ TA ≤ +125°C 5
Input Offset Current (VS=2.7 V) IOS 50 200 pA 5
Input Offset Current (VS=2.7 V) IOS 250 pA −40°C ≤ TA ≤ +125°C 5
Input Voltage Range (VS=2.7 V) 0 2.7 V 5
Common-Mode Rejection Ratio (VS=2.7 V) CMRR 115 130 dB VCM = 0 V to 2.7 V 5
Common-Mode Rejection Ratio (VS=2.7 V) CMRR 110 120 dB −40°C ≤ TA ≤ +125°C 5
Large Signal Voltage Gain (VS=2.7 V) AVO 110 140 dB RL = 10 kΩ, VO = 0.3 V to 2.4 V 5
Large Signal Voltage Gain (VS=2.7 V) AVO 105 130 dB −40°C ≤ TA ≤ +125°C 5
Offset Voltage Drift (VS=2.7 V) ∆VOS/∆T 0.002 0.02 µV/°C −40°C ≤ TA ≤ +125°C 5
Output Voltage High (VS=2.7 V) VOH 2.68 2.695 V RL = 100 kΩ to ground 5
Output Voltage High (VS=2.7 V) VOH 2.67 2.68 V RL = 10 kΩ to ground 5
Output Voltage High (VS=2.7 V) VOH 2.67 2.675 V −40°C ≤ TA ≤ +125°C 5
Output Voltage Low (VS=2.7 V) VOL 1 5 mV RL = 100 kΩ to V+ 5
Output Voltage Low (VS=2.7 V) VOL 2 5 mV −40°C ≤ TA ≤ +125°C 5
Output Voltage Low (VS=2.7 V) VOL 10 20 mV RL = 10 kΩ to V+ 5
Output Voltage Low (VS=2.7 V) VOL 15 20 mV −40°C ≤ TA ≤ +125°C 5
Short-Circuit Limit (VS=2.7 V) ISC 10 15 mA 5
Short-Circuit Limit (VS=2.7 V) ISC 10 mA −40°C ≤ TA ≤ +125°C 5
Output Current (VS=2.7 V) IO 10 mA 5
Output Current (VS=2.7 V) IO 5 mA −40°C ≤ TA ≤ +125°C 5
Power Supply Rejection Ratio (VS=2.7 V) PSRR 115 130 dB VS = 2.7 V to 5.5 V, −40°C ≤ TA ≤ +125°C 5
Supply Current per Amplifier (VS=2.7 V) ISY 0.75 1 mA VO = VS/2 5
Supply Current per Amplifier (VS=2.7 V) ISY 0.9 1.2 mA −40°C ≤ TA ≤ +125°C 5
Supply Voltage 6 V 6
Differential Input Voltage -5 5 V limited to ±5 V or the supply voltage, whichever is less (footnote 1) 6
Operating Temperature Range -40 125 °C 6
Storage Temperature Range -65 150 °C 6
Thermal Resistance Junction-to-Ambient (8-Lead SOIC_N, R-8) θJA 158 °C/W device soldered in circuit board, standard two-layer board 6
Thermal Resistance Junction-to-Case (8-Lead SOIC_N, R-8) θJC 43 °C/W 8-Lead SOIC_N (R-8) 6

CAD (KiCad official)

  • Symbol: AD8628ARZ-REEL7
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ad8628arz-reel7-etched.step / ad8628arz-reel7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad8628arz-reel7.step / ad8628arz-reel7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (24 pp, sha256 71e9817d8d8ec6ba, retrieved 2026-10-19, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF