component
AD8627AKSZ-REEL
Public Made by Adomby adom
Analog Devices FET InputAmplifiers, SC-70-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAD8627AKSZ-REEL
Analog Devices · FET InputAmplifiers · SC-70-5
AD8627AKSZ-REEL from Analog Devices, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Output of amplifier A, which swings rail-to-rail and remains stable with capacitive loads of over 500 pF. |
| 2 | V- | power_in | Negative supply (V-); dual supply is ±2.5 V to ±13 V and single supply is 5 V to 26 V with V- as the low rail. |
| 3 | +IN | input | Noninverting input with an input voltage range extending 0.2 V below -VS to 2 V below +VS. |
| 4 | -IN | input | Inverting input; a 10 kΩ series resistor is recommended if the input may exceed the positive supply by more than 300 mV. |
| 5 | V+ | power_in | Positive supply (V+); single-supply operation is 5 V to 26 V and the absolute maximum supply voltage is 27 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SC-70-5 |
| Category | Operational Amplifier/Comparator |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Offset Voltage | VOS | 0.05 | 0.5 | mV | VS = 5 V, VCM = 1.5 V, TA = 25°C | 3 | |
| Offset Voltage over temperature | VOS | 1.2 | mV | -40°C < TA < +85°C | 3 | ||
| Input Bias Current | IB | 0.25 | 1 | pA | VS = 5 V, VCM = 1.5 V, TA = 25°C | 3 | |
| Input Bias Current over temperature | IB | 60 | pA | -40°C < TA < +85°C | 3 | ||
| Input Offset Current over temperature | IOS | 25 | pA | -40°C < TA < +85°C | 3 | ||
| Input Voltage Range | 0 | 3 | V | VS = 5 V, VCM = 1.5 V, TA = 25°C | 3 | ||
| Common-Mode Rejection Ratio | CMRR | 66 | 87 | dB | VCM = 0 V to 2.5 V | 3 | |
| Large Signal Voltage Gain | AVO | 100 | 230 | V/mV | RL = 10 kΩ, VO = 0.5 V to 4.5 V | 3 | |
| Output Voltage High | VOH | 4.92 | V | IL = 2 mA, VS = 5 V, TA = 25°C | 3 | ||
| Output Voltage High over temperature | VOH | 4.9 | V | IL = 2 mA, -40°C < TA < +85°C | 3 | ||
| Output Voltage Low | VOL | 0.075 | V | IL = 2 mA, VS = 5 V, TA = 25°C | 3 | ||
| Output Voltage Low over temperature | VOL | 0.08 | V | IL = 2 mA, -40°C < TA < +85°C | 3 | ||
| Output Current | IOUT | -10 | 10 | mA | VS = 5 V | 3 | |
| Power-Supply Rejection Ratio | PSRR | 80 | 104 | dB | VS = 5 V to 26 V | 3 | |
| Supply Current/Amplifier | ISY | 630 | 785 | µA | VS = 5 V, TA = 25°C | 3 | |
| Supply Current/Amplifier over temperature | ISY | 800 | µA | -40°C < TA < +85°C | 3 | ||
| Supply Voltage | 27 | V | 5 | ||||
| Storage Temperature Range, R Package | -65 | 125 | °C | 5 | |||
| Operating Temperature Range | -40 | 85 | °C | 5 | |||
| Junction Temperature Range, R Package | -65 | 150 | °C | 5 | |||
| Lead Temperature Range (Soldering) | 300 | °C | Soldering, 60 sec | 5 | |||
| Thermal Resistance Junction-to-Ambient, 5-Lead SC70 (KS) | θJA | 376 | °C/W | Surface-mount package soldered in circuit board, worst case | 5 | ||
| Thermal Resistance Junction-to-Case, 5-Lead SC70 (KS) | θJC | 126 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
AD8627AKSZ-REEL - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
ad8627aksz-reel-etched.step/ad8627aksz-reel-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad8627aksz-reel.step/ad8627aksz-reel.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
f045f143aaf24673, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).