component
AD8627AKSZ-R2
Public Made by Adomby adom
Analog Devices FET Input Amplifiers, SC-70-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAD8627AKSZ-R2
Analog Devices · FET Input Amplifiers · SC-70-5
AD8627AKSZ-R2 from Analog Devices, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output, rail-to-rail, stable with capacitive loads over 500 pF and up to ±10 mA output current at VS = 5 V. |
| 2 | V- | power_in | Negative supply, ground in single-supply operation; the input common-mode range extends 0.2 V below this pin. |
| 3 | +IN | input | Non-inverting JFET input with 1 pA max bias current; a series resistor is advised if the input may exceed the positive supply by more than 300 mV. |
| 4 | -IN | input | Inverting JFET input with 1 pA max bias current. |
| 5 | V+ | power_in | Positive supply, 5 V to 26 V single supply or up to ±13 V dual supply (27 V absolute maximum). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SC-70-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Offset Voltage | VOS | 0.05 | 0.5 | mV | @VS = 5 V, VCM = 1.5 V, TA = 25°C | 3 | |
| Offset Voltage over temperature | VOS | 1.2 | mV | @VS = 5 V, VCM = 1.5 V, TA = 25°C; -40°C < TA < +85°C | 3 | ||
| Input Bias Current | IB | 0.25 | 1 | pA | @VS = 5 V, VCM = 1.5 V, TA = 25°C | 3 | |
| Input Bias Current over temperature | IB | 60 | pA | @VS = 5 V, VCM = 1.5 V, TA = 25°C; -40°C < TA < +85°C | 3 | ||
| Input Offset Current over temperature | IOS | 25 | pA | @VS = 5 V, VCM = 1.5 V, TA = 25°C; -40°C < TA < +85°C | 3 | ||
| Input Voltage Range | 0 | 3 | V | @VS = 5 V, VCM = 1.5 V, TA = 25°C | 3 | ||
| Common-Mode Rejection Ratio | CMRR | 66 | 87 | dB | @VS = 5 V, VCM = 1.5 V, TA = 25°C; VCM = 0 V to 2.5 V | 3 | |
| Large Signal Voltage Gain | AVO | 100 | 230 | V/mV | @VS = 5 V, VCM = 1.5 V, TA = 25°C; RL = 10 kΩ, VO = 0.5 V to 4.5 V | 3 | |
| Output Voltage High over temperature | VOH | 4.9 | V | @VS = 5 V, VCM = 1.5 V, TA = 25°C; IL = 2 mA, -40°C < TA < +85°C | 3 | ||
| Output Voltage Low over temperature | VOL | 0.08 | V | @VS = 5 V, VCM = 1.5 V, TA = 25°C; IL = 2 mA, -40°C < TA < +85°C | 3 | ||
| Output Current | IOUT | -10 | 10 | mA | @VS = 5 V, VCM = 1.5 V, TA = 25°C | 3 | |
| Power-Supply Rejection Ratio | PSRR | 80 | 104 | dB | @VS = 5 V, VCM = 1.5 V, TA = 25°C; VS = 5 V to 26 V | 3 | |
| Supply Current/Amplifier | ISY | 630 | 785 | µA | @VS = 5 V, VCM = 1.5 V, TA = 25°C | 3 | |
| Supply Current/Amplifier over temperature | ISY | 800 | µA | @VS = 5 V, VCM = 1.5 V, TA = 25°C; -40°C < TA < +85°C | 3 | ||
| Offset Voltage Drift | ∆VOS/∆T | 2.5 | µV/°C | @VS = 5 V, VCM = 1.5 V, TA = 25°C; -40°C < TA < +85°C | 3 | ||
| Input Offset Current | IOS | 0.5 | pA | @VS = 5 V, VCM = 1.5 V, TA = 25°C | 3 | ||
| Output Voltage High | VOH | 4.92 | V | @VS = 5 V, VCM = 1.5 V, TA = 25°C | 3 | ||
| Output Voltage Low | VOL | 0.075 | V | @VS = 5 V, VCM = 1.5 V, TA = 25°C | 3 | ||
| Slew Rate | SR | 5 | V/µs | @VS = 5 V, VCM = 1.5 V, TA = 25°C | 3 | ||
| Gain Bandwidth Product | GBP | 5 | MHz | @VS = 5 V, VCM = 1.5 V, TA = 25°C | 3 | ||
| Phase Margin | ØM | 60 | Degrees | @VS = 5 V, VCM = 1.5 V, TA = 25°C | 3 | ||
| Voltage Noise p-p | en p-p | 1.9 | µV p-p | @VS = 5 V, VCM = 1.5 V, TA = 25°C; 0.1 Hz to 10 Hz | 3 | ||
| Voltage Noise Density | en | 17.5 | nV/√Hz | @VS = 5 V, VCM = 1.5 V, TA = 25°C; f = 1 kHz | 3 | ||
| Current Noise Density | in | 0.4 | fA/√Hz | @VS = 5 V, VCM = 1.5 V, TA = 25°C; f = 1 kHz | 3 | ||
| Channel Separation | Cs | 104 | dB | @VS = 5 V, VCM = 1.5 V, TA = 25°C; f = 1 kHz | 3 | ||
| Offset Voltage | VOS | 0.35 | 0.75 | mV | @VS = ±13 V; VCM = 0 V; TA = 25°C | 4 | |
| Offset Voltage over temperature | VOS | 1.35 | mV | @VS = ±13 V; VCM = 0 V; TA = 25°C; -40°C < TA < +85°C | 4 | ||
| Input Bias Current | IB | 0.25 | 1 | pA | @VS = ±13 V; VCM = 0 V; TA = 25°C | 4 | |
| Input Bias Current over temperature | IB | 60 | pA | @VS = ±13 V; VCM = 0 V; TA = 25°C; -40°C < TA < +85°C | 4 | ||
| Input Offset Current over temperature | IOS | 25 | pA | @VS = ±13 V; VCM = 0 V; TA = 25°C; -40°C < TA < +85°C | 4 | ||
| Input Voltage Range | -13 | 11 | V | @VS = ±13 V; VCM = 0 V; TA = 25°C | 4 | ||
| Common-Mode Rejection Ratio | CMRR | 76 | 105 | dB | @VS = ±13 V; VCM = 0 V; TA = 25°C; VCM = -13 V to +10 V | 4 | |
| Large Signal Voltage Gain | AVO | 150 | 310 | V/mV | @VS = ±13 V; VCM = 0 V; TA = 25°C; RL = 10 kΩ, VO = -11 V to +11 V | 4 | |
| Output Voltage High over temperature | VOH | 12.91 | V | @VS = ±13 V; VCM = 0 V; TA = 25°C; IL = 2 mA, -40°C < TA < +85°C | 4 | ||
| Output Voltage Low over temperature | VOL | -12.91 | V | @VS = ±13 V; VCM = 0 V; TA = 25°C; IL = 2 mA, -40°C < TA < +85°C | 4 | ||
| Output Current | IOUT | -15 | 15 | mA | @VS = ±13 V; VCM = 0 V; TA = 25°C | 4 | |
| Power-Supply Rejection Ratio | PSRR | 80 | 104 | dB | @VS = ±13 V; VCM = 0 V; TA = 25°C; VS = ±2.5 V to ±13 V | 4 | |
| Supply Current/Amplifier | ISY | 710 | 850 | µA | @VS = ±13 V; VCM = 0 V; TA = 25°C | 4 | |
| Supply Current/Amplifier over temperature | ISY | 900 | µA | @VS = ±13 V; VCM = 0 V; TA = 25°C; -40°C < TA < +85°C | 4 | ||
| Offset Voltage Drift | ∆VOS/∆T | 2.5 | µV/°C | @VS = ±13 V; VCM = 0 V; TA = 25°C; -40°C < TA < +85°C | 4 | ||
| Input Offset Current | IOS | 0.5 | pA | @VS = ±13 V; VCM = 0 V; TA = 25°C | 4 | ||
| Output Voltage High | VOH | 12.92 | V | @VS = ±13 V; VCM = 0 V; TA = 25°C | 4 | ||
| Output Voltage Low | VOL | -12.92 | V | @VS = ±13 V; VCM = 0 V; TA = 25°C | 4 | ||
| Slew Rate | SR | 5 | V/µs | @VS = ±13 V; VCM = 0 V; TA = 25°C | 4 | ||
| Gain Bandwidth Product | GBP | 5 | MHz | @VS = ±13 V; VCM = 0 V; TA = 25°C | 4 | ||
| Phase Margin | ØM | 60 | Degrees | @VS = ±13 V; VCM = 0 V; TA = 25°C | 4 | ||
| Voltage Noise p-p | en p-p | 2.5 | µV p-p | @VS = ±13 V; VCM = 0 V; TA = 25°C; 0.1 Hz to 10 Hz | 4 | ||
| Voltage Noise Density | en | 16 | nV/√Hz | @VS = ±13 V; VCM = 0 V; TA = 25°C; f = 1 kHz | 4 | ||
| Current Noise Density | in | 0.5 | fA/√Hz | @VS = ±13 V; VCM = 0 V; TA = 25°C; f = 1 kHz | 4 | ||
| Channel Separation | Cs | 105 | dB | @VS = ±13 V; VCM = 0 V; TA = 25°C; f = 1 kHz | 4 | ||
| Supply Voltage | 27 | V | 5 | ||||
| Operating Temperature Range | -40 | 85 | °C | 5 | |||
| Lead Temperature Range (Soldering) | 300 | °C | Soldering, 60 sec | 5 | |||
| Thermal Resistance, junction-to-ambient (5-Lead SC70, KS) | θJA | 376 | °C/W | Worst-case, surface-mount soldered in circuit board | 5 | ||
| Thermal Resistance, junction-to-case (5-Lead SC70, KS) | θJC | 126 | °C/W | 5 | |||
| Single-supply operating voltage | VS | 5 | 26 | V | Single-supply operation (Features list) | 1 | |
| Dual-supply operating voltage | VS | 2.5 | 13 | V | Dual-supply operation ±2.5 V to ±13 V (Features list) | 1 |
CAD (KiCad official)
- Symbol:
AD8627AKSZ-R2 - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
ad8627aksz-r2-etched.step/ad8627aksz-r2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad8627aksz-r2.step/ad8627aksz-r2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
f045f143aaf24673, retrieved 2026-10-20, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).