component

AD8619ARUZ

Public Made by Adom

by adom

UMW Operational Amplifier, TSSOP-14. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentop-amp-cmpad8619aruz
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ad8619aruz: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 4d ago
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 1mo ago
ad8619aruz-etched.fit.json ad8619aruz: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 4d ago
ad8619aruz-etched.glb ad8619aruz: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 4d ago
ad8619aruz-etched.step ad8619aruz: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 4d ago
ad8619aruz.glb Publish 0.1.0 · Ray 1mo ago
ad8619aruz.kicad_mod Publish 0.1.0 · Ray 1mo ago
ad8619aruz.kicad_sym Publish 0.1.0 · Ray 1mo ago
ad8619aruz.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect and oval pad as a SQUARE EAGLE smd; this carries the real pad shape across (0 -> 14 rounded pads) and stops dropping geometry drawn on KiCad User.N layers. Attributes, connects, pads and the pin-1 marker are gated against decreasing and are unchanged. · Ray 1mo ago
ad8619aruz.step Publish 0.1.0 · Ray 1mo ago
package.json Publish 0.2.0 · Ray 1mo ago
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 1mo ago
page.json ad8619aruz: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray 15h ago
README.md ad8619aruz: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray 20d ago

AD8619ARUZ

UMW · Operational Amplifier · TSSOP-14

AD8619ARUZ from UMW, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT A output Output of amplifier A. Rail-to-rail CMOS output, ±80 mA short-circuit current, 15 Ω typ closed-loop output impedance at 10 kHz.
2 -IN A input Inverting input of amplifier A. Rail-to-rail CMOS input, 1 pA typ bias current, input voltage range VSS−0.3 V to VDD+0.3 V.
3 +IN A input Non-inverting input of amplifier A. Rail-to-rail CMOS input, 1 pA typ bias current.
4 V+ power_in Positive supply. 1.8 V to 5.5 V single-supply range; absolute maximum 6 V. Supply current 38 µA typ/50 µA max per amplifier.
5 +IN B input Non-inverting input of amplifier B. Rail-to-rail CMOS input, 1 pA typ bias current.
6 -IN B input Inverting input of amplifier B.
7 OUT B output Output of amplifier B. Rail-to-rail CMOS output.
8 OUT C output Output of amplifier C. Rail-to-rail CMOS output.
9 -IN C input Inverting input of amplifier C.
10 +IN C input Non-inverting input of amplifier C.
11 V- power_in Negative supply / GND in single-supply operation. Referenced to VSS; dual-supply ±0.9 V to ±2.5 V.
12 +IN D input Non-inverting input of amplifier D.
13 -IN D input Inverting input of amplifier D.
14 OUT D output Output of amplifier D. Rail-to-rail CMOS output.

Key specifications

Parameter Value
Manufacturer UMW
Package TSSOP-14
Category Op-amp/Cmp
Pins 14

Ordering variants

  • AD8619ARUZ

CAD (KiCad official)

  • Symbol: AD8619ARUZ
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: ad8619aruz-etched.step / ad8619aruz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad8619aruz.step / ad8619aruz.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
ad8619aruz.step 194 KB You want the bare part, or you mark your own boards.
ad8619aruz-etched.step 2.5 MB You want the part with AD8619ARUZ already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 615 faces against 237 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: UMW datasheet (19 pp, sha256 f88d493468a63f28, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF