component
AD8610ARZ-REEL7
Public Made by Adomby adom
Analog Devices FET Input Amplifiers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 6d ago |
| viewers | 6d ago |
| ad8610arz-reel7-etched.glb | 6d ago |
| ad8610arz-reel7-etched.step | 6d ago |
| ad8610arz-reel7-hero.glb | 6d ago |
| ad8610arz-reel7-hero.overlay.json | 6d ago |
| ad8610arz-reel7.glb | 6d ago |
| ad8610arz-reel7.kicad_mod | 6d ago |
| ad8610arz-reel7.kicad_sym | 6d ago |
| ad8610arz-reel7.lbr | 6d ago |
| ad8610arz-reel7.step | 6d ago |
| package.json | 6d ago |
| page.json | 6d ago |
| README.md | 6d ago |
AD8610ARZ-REEL7
Analog Devices · FET Input Amplifiers · SOIC-8
AD8610ARZ-REEL7 from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NULL | passive | Offset-null pin; with a resistor of about 50 kΩ it gives an offset adjustment range of ±3.3 mV, though the datasheet says trimming is generally not needed. |
| 2 | -IN | input | Inverting input; the input voltage range is −10.5 V to +10.5 V at ±13 V supplies, and a 10 kΩ series resistor is suggested to limit current if the input can exceed the supply rails. |
| 3 | +IN | input | Non-inverting input; the input voltage range is −10.5 V to +10.5 V at ±13 V supplies, and the amplifier does not phase-invert when an input is driven outside the common-mode range. |
| 4 | V- | power_in | Negative supply rail; the part is rated for dual supplies of ±5.0 V to ±13 V, with a absolute maximum total supply of 27.3 V. |
| 5 | NULL | passive | Offset-null pin; with a resistor of about 50 kΩ it gives an offset adjustment range of ±3.3 mV, though the datasheet says trimming is generally not needed. |
| 6 | OUT | output | Amplifier output; it sources or sinks ±30 mA when the output exceeds ±2 V at ±5 V supplies, with a short-circuit current of ±65 mA at ±13 V. |
| 7 | V+ | power_in | Positive supply rail; the part is rated for dual supplies of ±5.0 V to ±13 V, with an absolute maximum supply voltage of 27.3 V. |
| 8 | NC | unconnected | No connect; the datasheet marks this pin as NO CONNECT. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (AD8610A/AD8620A) | VOS | 85 | 250 | μV | 4 | ||
| Input offset voltage (AD8610A/AD8620A) | VOS | 90 | 350 | μV | 25°C < TA < 125°C | 4 | |
| Input offset voltage (AD8610A/AD8620A) | VOS | 150 | 850 | μV | −40°C < TA < +125°C | 4 | |
| Input bias current | IB | -10 | 3 | 10 | pA | 4 | |
| Input bias current | IB | -250 | 130 | 250 | pA | −40°C < TA < +85°C | 4 |
| Input bias current | IB | -3.5 | 3.5 | nA | −40°C < TA < +125°C | 4 | |
| Input offset current | IOS | -10 | 1.5 | 10 | pA | 4 | |
| Input offset current | IOS | -75 | 20 | 75 | pA | −40°C < TA < +85°C | 4 |
| Input offset current | IOS | -150 | 40 | 150 | pA | −40°C < TA < +125°C | 4 |
| Input voltage range | -10.5 | 10.5 | V | 4 | |||
| Common-mode rejection ratio | CMRR | 90 | 110 | dB | VCM = −10 V to +10 V | 4 | |
| Large-signal voltage gain | AVO | 100 | 200 | V/mV | RL = 1 kΩ, VO = −10 V to +10 V | 4 | |
| Offset voltage drift (AD8610A/AD8620A) | ΔVOS/ΔT | 0.8 | 3.5 | μV/°C | −40°C < TA < +125°C | 4 | |
| High output voltage | VOH | 11.75 | 11.84 | V | RL = 1 kΩ, −40°C < TA < +125°C | 4 | |
| Low output voltage | VOL | -11.84 | -11.75 | V | RL = 1 kΩ, −40°C < TA < +125°C | 4 | |
| Output current | IOUT | -45 | 45 | mA | VOUT > 10 V | 4 | |
| Short-circuit current | ISC | -65 | 65 | mA | 4 | ||
| Power supply rejection ratio | PSRR | 100 | 110 | dB | VS = ±5 V to ±13 V | 4 | |
| Supply current per amplifier | ISY | 3 | 3.5 | mA | VO = 0 V | 4 | |
| Supply current per amplifier | ISY | 3.5 | 4 | mA | −40°C < TA < +125°C | 4 | |
| Slew rate | SR | 40 | 60 | V/μs | RL = 2 kΩ | 4 | |
| Settling time | tS | 600 | ns | AV = +1, 10 V step, to 0.01% | 4 | ||
| Supply voltage | 27.3 | V | 5 | ||||
| Operating temperature range | -40 | 125 | °C | 5 | |||
| Storage temperature range | -65 | 150 | °C | 5 | |||
| Junction temperature range | -65 | 150 | °C | 5 | |||
| Lead temperature (soldering) | 300 | °C | soldering, 10 s | 5 | |||
| Operating supply voltage (dual supply) | VS | 5 | 13 | V | Dual supply ±5 V to ±13 V; rated maximum ±13 V | 1 | |
| Thermal resistance junction-to-ambient | θJA | 158 | °C/W | 8-lead SOIC (R-8), worst case, surface-mounted on board | 5 | ||
| Thermal resistance junction-to-case | θJC | 43 | °C/W | 8-lead SOIC (R-8) | 5 |
CAD (KiCad official)
- Symbol:
AD8610ARZ-REEL7 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ad8610arz-reel7-etched.step/ad8610arz-reel7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad8610arz-reel7.step/ad8610arz-reel7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
b9bd6d695d261ee9, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).