component
AD8541ARTZ-REEL
Public Made by Adomby adom
Analog Devices Operational Amplifier, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAD8541ARTZ-REEL
Analog Devices · Operational Amplifier · SOT-23-5
AD8541ARTZ-REEL from Analog Devices, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Output of amplifier A, rated at IOUT of 15 mA at VOUT = VS − 1 V and ISC of ±20 mA at VS = 2.7 V (typical, page 3). |
| 2 | V- | power_in | Negative supply rail; the part runs single-supply from 2.7 V to 5.5 V, so V- is normally tied to GND. |
| 3 | +IN A | input | Non-inverting input of amplifier A; input voltage must stay within GND to VS, and the absolute maximum is GND to VS with differential input limited to ±VS (page 6). |
| 4 | -IN A | input | Inverting input of amplifier A; typical input bias current is 4 pA at 25°C (page 3). |
| 5 | V+ | power_in | Positive supply rail; 2.7 V to 5.5 V single-supply operation with a 6 V absolute maximum supply voltage (pages 1 and 6). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | 1 | 6 | mV | 3 | ||
| Input offset voltage | VOS | 7 | mV | −40°C ≤ TA ≤ +125°C | 3 | ||
| Input bias current | IB | 4 | 60 | pA | 3 | ||
| Input bias current | IB | 100 | pA | −40°C ≤ TA ≤ +85°C | 3 | ||
| Input bias current | IB | 1000 | pA | −40°C ≤ TA ≤ +125°C | 3 | ||
| Input offset current | IOS | 0.1 | 30 | pA | 3 | ||
| Input offset current | IOS | 50 | pA | −40°C ≤ TA ≤ +85°C | 3 | ||
| Input offset current | IOS | 500 | pA | −40°C ≤ TA ≤ +125°C | 3 | ||
| Input voltage range | 0 | 2.7 | V | 3 | |||
| Common-mode rejection ratio | CMRR | 40 | 45 | dB | VCM = 0 V to 2.7 V | 3 | |
| Common-mode rejection ratio | CMRR | 38 | dB | −40°C ≤ TA ≤ +125°C | 3 | ||
| Large-signal voltage gain | AVO | 100 | 500 | V/mV | RL = 100 kΩ, VO = 0.5 V to 2.2 V | 3 | |
| Large-signal voltage gain | AVO | 50 | V/mV | −40°C ≤ TA ≤ +85°C | 3 | ||
| Large-signal voltage gain | AVO | 2 | V/mV | −40°C ≤ TA ≤ +125°C | 3 | ||
| High output voltage | VOH | 2.575 | 2.65 | V | IL = 1 mA | 3 | |
| High output voltage | VOH | 2.55 | V | −40°C ≤ TA ≤ +125°C | 3 | ||
| Low output voltage | VOL | 35 | 100 | mV | IL = 1 mA | 3 | |
| Low output voltage | VOL | 125 | mV | −40°C ≤ TA ≤ +125°C | 3 | ||
| Power supply rejection ratio | PSRR | 65 | 76 | dB | VS = 2.5 V to 6 V | 3 | |
| Power supply rejection ratio | PSRR | 60 | dB | −40°C ≤ TA ≤ +125°C | 3 | ||
| Supply current per amplifier | ISY | 38 | 55 | μA | VO = 0 V | 3 | |
| Supply current per amplifier | ISY | 75 | μA | −40°C ≤ TA ≤ +125°C | 3 | ||
| Short-circuit current | ISC | -20 | 20 | mA | 3 | ||
| Slew rate | SR | 0.4 | 0.75 | V/μs | RL = 100 kΩ | 3 | |
| Phase margin | ΦM | 63 | ° | 3 | |||
| Input current noise density | in | 0.1 | pA/√Hz | 3 | |||
| Input offset voltage drift | ΔVOS/ΔT | 4 | μV/°C | −40°C ≤ TA ≤ +125°C | 3 | ||
| Input bias current drift | ΔIB/ΔT | 100 | fA/°C | −40°C ≤ TA ≤ +85°C | 3 | ||
| Input bias current drift | ΔIB/ΔT | 2000 | fA/°C | −40°C ≤ TA ≤ +125°C | 3 | ||
| Input offset current drift | ΔIOS/ΔT | 25 | fA/°C | −40°C ≤ TA ≤ +125°C | 3 | ||
| Output current | IOUT | 15 | mA | VOUT = VS − 1 V | 3 | ||
| Open-loop output impedance | ZOUT | 50 | Ω | f = 200 kHz, AV = 1 | 3 | ||
| Settling time | tS | 5 | μs | to 0.1% (1 V step) | 3 | ||
| Gain bandwidth product | GBP | 980 | kHz | 3 | |||
| Input voltage noise density | en | 40 | nV/√Hz | f = 1 kHz | 3 | ||
| Input voltage noise density | en | 38 | nV/√Hz | f = 10 kHz | 3 | ||
| Supply voltage | VS | 6 | V | 6 | |||
| Differential input voltage | -6 | 6 | V | 6 | |||
| Storage temperature range | -65 | 150 | °C | 6 | |||
| Operating temperature range | -40 | 125 | °C | 6 | |||
| Junction temperature range | -65 | 150 | °C | 6 | |||
| Lead temperature | 300 | °C | Soldering, 60 sec | 6 | |||
| Thermal resistance junction-to-ambient (5-lead SOT-23, RJ-5) | θJA | 230 | °C/W | 6 | |||
| Thermal resistance junction-to-case (5-lead SOT-23, RJ-5) | θJC | 146 | °C/W | 6 | |||
| Supply voltage (single supply) | VS | 2.7 | 5.5 | V | 1 |
CAD (KiCad official)
- Symbol:
AD8541ARTZ-REEL - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ad8541artz-reel-etched.step/ad8541artz-reel-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad8541artz-reel.step/ad8541artz-reel.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
22d894dc0ac5c2c4, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).