component
AD8495CRMZ
Public Made by Adomby adom
Analog Devices Pre-ordered Chips, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 4d ago |
| viewers | 4d ago |
| ad8495crmz-etched.glb | 4d ago |
| ad8495crmz-etched.step | 4d ago |
| ad8495crmz-hero.glb | 4d ago |
| ad8495crmz-hero.overlay.json | 4d ago |
| ad8495crmz.glb | 4d ago |
| ad8495crmz.kicad_mod | 4d ago |
| ad8495crmz.kicad_sym | 4d ago |
| ad8495crmz.lbr | 4d ago |
| ad8495crmz.step | 4d ago |
| package.json | 4d ago |
| page.json | 4d ago |
| README.md | 4d ago |
| verification.json | 4d ago |
AD8495CRMZ
Analog Devices · Pre-ordered Chips · MSOP-8
AD8495CRMZ from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | −IN | input | Negative input of the thermocouple amplifier; inputs withstand up to 25 V beyond the opposite supply rail (OVP) and 4 kV ESD, and a 1 MΩ resistor to ground enables open-thermocouple detection. |
| 2 | REF | input | Reference pin that offsets the output voltage (VOUT = TMJ × 5 mV/°C + VREF); it must be driven by a low impedance source and should not go beyond 0.3 V of the supply rails. |
| 3 | −VS | power_in | Negative supply (ground on single supply); dual supply operation is ±2.7 V to ±18 V. |
| 4 | NC | unconnected | No connect pin. |
| 5 | SENSE | input | Sense pin that connects to the output in measurement mode or to the setpoint voltage in setpoint mode, and should not go beyond 0.3 V of the supply rails. |
| 6 | OUT | output | Output at 5 mV/°C, with a range of -VS + 0.025 V to +VS - 0.1 V and 7 mA typical short-circuit current. |
| 7 | +VS | power_in | Positive supply, with single-supply operation from 2.7 V to 36 V and a maximum rating of ±18 V on the supply voltage. |
| 8 | +IN | input | Positive input of the thermocouple amplifier; inputs withstand up to 25 V beyond the opposite supply rail (OVP) and 4 kV ESD. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Interface ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Initial Accuracy | 1 | °C | AD8494/AD8495, TA = TRJ = TMJ = 25°C, C Grade | 3 | |||
| Ambient Temperature Rejection | 0.025 | °C/°C | AD8494/AD8495, TA = TRJ = 0°C to 50°C, C Grade | 3 | |||
| Gain Error | 0.1 | % | AD8494/AD8495, VOUT = 0.125 V to 4.125 V, C Grade | 3 | |||
| Input Bias Current | 25 | 50 | nA | 3 | |||
| Input Offset Current | 0.5 | nA | C Grade | 3 | |||
| Common-Mode Rejection | 0.3 | °C/V | VCM = 0 V to 3 V, C Grade | 3 | |||
| Power Supply Rejection | 0.5 | °C/V | +VS = 2.7 V to 5 V | 3 | |||
| Operating Voltage Range, Single Supply | 2.7 | 36 | V | Single Supply | 3 | ||
| Operating Voltage Range, Dual Supply | -2.7 | 18 | V | Dual Supply, ±2.7 to ±18 | 3 | ||
| Quiescent Current | 180 | 250 | µA | 3 | |||
| Specified Performance Temperature Range (TA) | TA | 0 | 50 | °C | AD8494/AD8495 | 4 | |
| Operational Temperature Range (TA) | TA | -40 | 125 | °C | Operational | 4 | |
| Transfer Function | 5 | mV/°C | 3 | ||||
| Voltage Noise | 0.8 | µV p-p | f = 0.1 Hz to 10 Hz, TA = 25°C | 3 | |||
| Voltage Noise Density | 32 | nV/√Hz | f = 1 kHz, TA = 25°C | 3 | |||
| Current Noise Density | 100 | fA/√Hz | f = 1 kHz, TA = 25°C | 3 | |||
| Reference Input Resistance | 60 | kΩ | 3 | ||||
| Reference Input Current | 25 | µA | 3 | ||||
| Reference Gain to Output | 1 | V/V | 3 | ||||
| Short-Circuit Current | 7 | mA | 3 | ||||
| -3 dB Bandwidth | 25 | kHz | AD8495/AD8497 | 3 | |||
| Settling Time to 0.1% | 40 | µs | 4 V output step, AD8495/AD8497 | 3 | |||
| Supply Voltage | -18 | 18 | V | ±18 V | 5 | ||
| Maximum Voltage at −IN or +IN | 25 | V | Printed as −VS + 25 V (offset above −VS) | 5 | |||
| Minimum Voltage at −IN or +IN | -25 | V | Printed as +VS − 25 V (offset below +VS) | 5 | |||
| Storage Temperature Range | -65 | 150 | °C | 5 | |||
| Operating Temperature Range | -40 | 125 | °C | 5 | |||
| Maximum IC Junction Temperature | 140 | °C | 5 | ||||
| ESD Human Body Model | 4.5 | kV | Human Body Model | 5 | |||
| ESD Field-Induced Charged Device Model | 1.5 | kV | Field-Induced Charged Device Model | 5 | |||
| Thermal Resistance Junction-to-Ambient | θJA | 135 | °C/W | 8-Lead MSOP (RM-8), 4-layer JEDEC PCB in free air | 5 |
CAD (KiCad official)
- Symbol:
AD8495CRMZ - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ad8495crmz-etched.step/ad8495crmz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad8495crmz.step/ad8495crmz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
a024db21d6e67759, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).