component
AD8479ARZ-RL
Public Made by Adomby adom
Analog Devices Precision Op Amps, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
AD8479ARZ-RL
Analog Devices · Precision Op Amps · SOIC-8
AD8479ARZ-RL from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF(-) | input | Negative reference input, which must be grounded (or tied to the same low-impedance ground plane as REF(+)) for unity gain, otherwise common-mode rejection degrades; it is limited to −VS − 0.3 V to +VS + 0.3 V. |
| 2 | -IN | input | Inverting input of the differential amplifier, with a common-mode range of ±600 V and a maximum differential input of ±14.7 V. |
| 3 | +IN | input | Noninverting input of the differential amplifier, with a common-mode range of ±600 V and a maximum differential input of ±14.7 V. |
| 4 | -VS | power_in | Negative supply voltage; the part operates from ±2.5 V to ±18 V supplies, and each supply pin should be decoupled with a 0.1 µF capacitor placed close to the pin. |
| 5 | REF(+) | input | Positive reference input that sets the output reference level, which must be grounded (or tied to the same low-impedance ground plane as REF(-)) for unity gain and is limited to −VS − 0.3 V to +VS + 0.3 V. |
| 6 | OUTPUT | output | Single-ended output, measured relative to REF(-) and REF(+), with a short-circuit current of ±55 mA and stable operation for capacitive loads up to 500 pF. |
| 7 | +VS | power_in | Positive supply voltage; the part operates from ±2.5 V to ±18 V supplies (absolute maximum ±18 V), and each supply pin should be decoupled with a 0.1 µF capacitor placed close to the pin. |
| 8 | NC | unconnected | No connect; do not connect this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Gain error | 0.01 | 0.02 | % | VOUT = ±10 V, RL = 2 kΩ | 3 | ||
| Gain nonlinearity | 4 | 10 | ppm | VOUT = ±10 V, RL = 2 kΩ | 3 | ||
| Gain drift | 3 | 5 | ppm/°C | TA = TMIN to TMAX | 3 | ||
| Input offset voltage | 0.5 | 3 | mV | VS = ±15 V | 3 | ||
| Input offset voltage drift | 3 | 15 | µV/°C | TA = TMIN to TMAX | 3 | ||
| Power supply rejection ratio (PSRR) | 84 | 100 | dB | VS = ±2.5 V to ±15 V | 3 | ||
| Common-mode rejection ratio (CMRR) | 80 | 90 | dB | VCM = ±600 V dc, TA = 25°C | 3 | ||
| Common-mode rejection ratio (CMRR) | 80 | dB | VCM = ±600 V dc, TA = TMIN to TMAX | 3 | |||
| Common-mode rejection ratio (CMRR), AC | 80 | dB | VCM = 1200 V p-p, DC to 12 kHz | 3 | |||
| Common-mode input voltage range | -600 | 600 | V | Common mode | 3 | ||
| Differential input voltage range | -14.7 | 14.7 | V | Differential | 3 | ||
| Output short-circuit current | -55 | 55 | mA | 3 | |||
| Slew rate | 7.5 | 8 | V/µs | 3 | |||
| Output voltage noise | 30 | 35 | µV p-p | 0.01 Hz to 10 Hz | 3 | ||
| Operating voltage range (supply) | VS | 2.5 | 18 | V | Dual supply, printed as ±2.5 V to ±18 V | 3 | |
| Supply current | 550 | 650 | µA | VOUT = 0 V | 3 | ||
| Supply current | 850 | µA | TA = TMIN to TMAX | 3 | |||
| Rated performance temperature range | -40 | 85 | °C | TA = TMIN to TMAX | 3 | ||
| Operating temperature range | -40 | 125 | °C | 3 | |||
| Supply voltage | VS | -18 | 18 | V | 4 | ||
| Input voltage range | -600 | 600 | V | Continuous, common mode and differential | 4 | ||
| Input voltage range | -900 | 900 | V | 10 s, common mode and differential | 4 | ||
| Maximum junction temperature | 150 | °C | 4 | ||||
| Operating temperature range | -40 | 125 | °C | 4 | |||
| Storage temperature range | -65 | 150 | °C | 4 | |||
| Lead temperature (soldering) | 300 | °C | Soldering, 60 s | 4 |
CAD (KiCad official)
- Symbol:
AD8479ARZ-RL - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ad8479arz-rl-etched.step/ad8479arz-rl-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad8479arz-rl.step/ad8479arz-rl.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
0289bdf604c7bb26, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AD8479ARZ-RL
**Analog Devices** · Precision Op Amps · SOIC-8
AD8479ARZ-RL from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF(-) | input | Negative reference input, which must be grounded (or tied to the same low-impedance ground plane as REF(+)) for unity gain, otherwise common-mode rejection degrades; it is limited to −VS − 0.3 V to +VS + 0.3 V. |
| 2 | -IN | input | Inverting input of the differential amplifier, with a common-mode range of ±600 V and a maximum differential input of ±14.7 V. |
| 3 | +IN | input | Noninverting input of the differential amplifier, with a common-mode range of ±600 V and a maximum differential input of ±14.7 V. |
| 4 | -VS | power_in | Negative supply voltage; the part operates from ±2.5 V to ±18 V supplies, and each supply pin should be decoupled with a 0.1 µF capacitor placed close to the pin. |
| 5 | REF(+) | input | Positive reference input that sets the output reference level, which must be grounded (or tied to the same low-impedance ground plane as REF(-)) for unity gain and is limited to −VS − 0.3 V to +VS + 0.3 V. |
| 6 | OUTPUT | output | Single-ended output, measured relative to REF(-) and REF(+), with a short-circuit current of ±55 mA and stable operation for capacitive loads up to 500 pF. |
| 7 | +VS | power_in | Positive supply voltage; the part operates from ±2.5 V to ±18 V supplies (absolute maximum ±18 V), and each supply pin should be decoupled with a 0.1 µF capacitor placed close to the pin. |
| 8 | NC | unconnected | No connect; do not connect this pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Gain error | | | 0.01 | 0.02 | % | VOUT = ±10 V, RL = 2 kΩ | 3 |
| Gain nonlinearity | | | 4 | 10 | ppm | VOUT = ±10 V, RL = 2 kΩ | 3 |
| Gain drift | | | 3 | 5 | ppm/°C | TA = TMIN to TMAX | 3 |
| Input offset voltage | | | 0.5 | 3 | mV | VS = ±15 V | 3 |
| Input offset voltage drift | | | 3 | 15 | µV/°C | TA = TMIN to TMAX | 3 |
| Power supply rejection ratio (PSRR) | | 84 | 100 | | dB | VS = ±2.5 V to ±15 V | 3 |
| Common-mode rejection ratio (CMRR) | | 80 | 90 | | dB | VCM = ±600 V dc, TA = 25°C | 3 |
| Common-mode rejection ratio (CMRR) | | 80 | | | dB | VCM = ±600 V dc, TA = TMIN to TMAX | 3 |
| Common-mode rejection ratio (CMRR), AC | | 80 | | | dB | VCM = 1200 V p-p, DC to 12 kHz | 3 |
| Common-mode input voltage range | | -600 | | 600 | V | Common mode | 3 |
| Differential input voltage range | | -14.7 | | 14.7 | V | Differential | 3 |
| Output short-circuit current | | -55 | | 55 | mA | | 3 |
| Slew rate | | 7.5 | 8 | | V/µs | | 3 |
| Output voltage noise | | | 30 | 35 | µV p-p | 0.01 Hz to 10 Hz | 3 |
| Operating voltage range (supply) | VS | 2.5 | | 18 | V | Dual supply, printed as ±2.5 V to ±18 V | 3 |
| Supply current | | | 550 | 650 | µA | VOUT = 0 V | 3 |
| Supply current | | | | 850 | µA | TA = TMIN to TMAX | 3 |
| Rated performance temperature range | | -40 | | 85 | °C | TA = TMIN to TMAX | 3 |
| Operating temperature range | | -40 | | 125 | °C | | 3 |
| Supply voltage | VS | -18 | | 18 | V | | 4 |
| Input voltage range | | -600 | | 600 | V | Continuous, common mode and differential | 4 |
| Input voltage range | | -900 | | 900 | V | 10 s, common mode and differential | 4 |
| Maximum junction temperature | | | | 150 | °C | | 4 |
| Operating temperature range | | -40 | | 125 | °C | | 4 |
| Storage temperature range | | -65 | | 150 | °C | | 4 |
| Lead temperature (soldering) | | | | 300 | °C | Soldering, 60 s | 4 |
## CAD (KiCad official)
- Symbol: `AD8479ARZ-RL`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `ad8479arz-rl-etched.step` / `ad8479arz-rl-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ad8479arz-rl.step` / `ad8479arz-rl.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588913420863619072) (16 pp, sha256 `0289bdf604c7bb26`, retrieved 2026-10-18, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ad8479arz-rl-datasheet.pdf)