component
AD8418WBRZ-RL
Public Made by Adomby adom
Analog Devices Current Sense Amplifiers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
AD8418WBRZ-RL
Analog Devices · Current Sense Amplifiers · SOIC-8
AD8418WBRZ-RL from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | -IN | input | Negative differential input, connected to the low side of the shunt; the continuous input common-mode range is -2 V to +70 V. |
| 2 | GND | power_in | Ground reference pin for the device. |
| 3 | VREF2 | input | Reference voltage input 2; it is tied internally to the offset node through a resistor and works interchangeably with VREF1 to set the output offset. |
| 4 | NC | unconnected | No connect; do not connect anything to this pin. |
| 5 | OUT | output | Buffered output with an initial gain of 20 V/V; the output swing is 0.015·VS − 0.020 V at RL = 25 kΩ. |
| 6 | VS | power_in | Single supply input, operating range 2.7 V to 5.5 V, with an absolute maximum of 6 V. |
| 7 | VREF1 | input | Reference voltage input 1; it is tied internally to the offset node through a resistor and works interchangeably with VREF2 to set the output offset. |
| 8 | +IN | input | Positive differential input, connected to the high side of the shunt; the continuous input common-mode range is -2 V to +70 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 增益误差 全温度范围内的误差 (Gain error over temperature) | -0.15 | 0.15 | % | 额定温度范围 | 3 | ||
| 增益与温度的关系 (Gain vs. temperature) | -8 | 8 | ppm/°C | 3 | |||
| 失调电压 (折合到输入端，RTI) | -200 | 200 | µV | 25°C | 3 | ||
| 失调电压 全温度范围 (RTI) | -400 | 400 | µV | 额定温度范围 | 3 | ||
| 失调漂移 (Offset drift) | -1 | 0.1 | 1 | µV/°C | 3 | ||
| 输入电压范围 共模，连续 (Input common-mode voltage range) | -2 | 70 | V | 共模，连续 | 3 | ||
| 共模抑制比 CMRR | 90 | 100 | dB | 额定温度范围，f = DC | 3 | ||
| 比率精度 分压器对电源 (Ratio accuracy, divider to supply) | 0.4995 | 0.5005 | V/V | 分压器对电源 | 3 | ||
| 精度(折合到输出端，RTO) (Accuracy referred to output) | -1 | 1 | mV/V | 施加到并联VREF1和VREF2的电压 | 3 | ||
| 电源工作范围 (Supply operating range) | 2.7 | 5.5 | V | 3 | |||
| 额定性能 工作温度范围 (Rated operating temperature range) | -40 | 125 | °C | 3 | |||
| 电源电压 (Power supply voltage, absolute max) | 6 | V | 4 | ||||
| 输入电压范围 连续 (Input voltage range, continuous, absolute max) | -2 | 70 | V | 4 | |||
| 耐压范围 (Voltage withstand range) | -4 | 85 | V | 4 | |||
| 差分输入耐压范围 (Differential input withstand range) | -5.5 | 5.5 | V | 4 | |||
| 反向电源电压 (Reverse supply voltage) | 0.3 | V | 4 | ||||
| ESD人体模型 (ESD HBM) | -2000 | 2000 | V | 4 | |||
| 工作温度范围 (Operating temperature range, absolute max) | -40 | 125 | °C | 4 | |||
| 存储温度范围 (Storage temperature range) | -65 | 150 | °C | 4 |
CAD (KiCad official)
- Symbol:
AD8418WBRZ-RL - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ad8418wbrz-rl-etched.step/ad8418wbrz-rl-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad8418wbrz-rl.step/ad8418wbrz-rl.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
54f86bb972456c8f, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AD8418WBRZ-RL
**Analog Devices** · Current Sense Amplifiers · SOIC-8
AD8418WBRZ-RL from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | -IN | input | Negative differential input, connected to the low side of the shunt; the continuous input common-mode range is -2 V to +70 V. |
| 2 | GND | power_in | Ground reference pin for the device. |
| 3 | VREF2 | input | Reference voltage input 2; it is tied internally to the offset node through a resistor and works interchangeably with VREF1 to set the output offset. |
| 4 | NC | unconnected | No connect; do not connect anything to this pin. |
| 5 | OUT | output | Buffered output with an initial gain of 20 V/V; the output swing is 0.015·VS − 0.020 V at RL = 25 kΩ. |
| 6 | VS | power_in | Single supply input, operating range 2.7 V to 5.5 V, with an absolute maximum of 6 V. |
| 7 | VREF1 | input | Reference voltage input 1; it is tied internally to the offset node through a resistor and works interchangeably with VREF2 to set the output offset. |
| 8 | +IN | input | Positive differential input, connected to the high side of the shunt; the continuous input common-mode range is -2 V to +70 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 增益误差 全温度范围内的误差 (Gain error over temperature) | | -0.15 | | 0.15 | % | 额定温度范围 | 3 |
| 增益与温度的关系 (Gain vs. temperature) | | -8 | | 8 | ppm/°C | | 3 |
| 失调电压 (折合到输入端，RTI) | | -200 | | 200 | µV | 25°C | 3 |
| 失调电压 全温度范围 (RTI) | | -400 | | 400 | µV | 额定温度范围 | 3 |
| 失调漂移 (Offset drift) | | -1 | 0.1 | 1 | µV/°C | | 3 |
| 输入电压范围 共模，连续 (Input common-mode voltage range) | | -2 | | 70 | V | 共模，连续 | 3 |
| 共模抑制比 CMRR | | 90 | 100 | | dB | 额定温度范围，f = DC | 3 |
| 比率精度 分压器对电源 (Ratio accuracy, divider to supply) | | 0.4995 | | 0.5005 | V/V | 分压器对电源 | 3 |
| 精度(折合到输出端，RTO) (Accuracy referred to output) | | -1 | | 1 | mV/V | 施加到并联VREF1和VREF2的电压 | 3 |
| 电源工作范围 (Supply operating range) | | 2.7 | | 5.5 | V | | 3 |
| 额定性能 工作温度范围 (Rated operating temperature range) | | -40 | | 125 | °C | | 3 |
| 电源电压 (Power supply voltage, absolute max) | | | | 6 | V | | 4 |
| 输入电压范围 连续 (Input voltage range, continuous, absolute max) | | -2 | | 70 | V | | 4 |
| 耐压范围 (Voltage withstand range) | | -4 | | 85 | V | | 4 |
| 差分输入耐压范围 (Differential input withstand range) | | -5.5 | | 5.5 | V | | 4 |
| 反向电源电压 (Reverse supply voltage) | | | | 0.3 | V | | 4 |
| ESD人体模型 (ESD HBM) | | -2000 | | 2000 | V | | 4 |
| 工作温度范围 (Operating temperature range, absolute max) | | -40 | | 125 | °C | | 4 |
| 存储温度范围 (Storage temperature range) | | -65 | | 150 | °C | | 4 |
## CAD (KiCad official)
- Symbol: `AD8418WBRZ-RL`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `ad8418wbrz-rl-etched.step` / `ad8418wbrz-rl-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ad8418wbrz-rl.step` / `ad8418wbrz-rl.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884926733565952) (16 pp, sha256 `54f86bb972456c8f`, retrieved 2026-10-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ad8418wbrz-rl-datasheet.pdf)