# AD8361ARTZ-RL7

**Analog Devices** · Pre-ordered Chips · SOT-23-6

AD8361ARTZ-RL7 from Analog Devices, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VRMS | output | Output Pin. Near rail-to-rail voltage output with limited current drive capabilities, with an expected load greater than 10 kΩ to ground. |
| 2 | COMM | power_in | Device Ground Pin. |
| 3 | FLTR | passive | By placing a capacitor between this pin and VPOS, the corner frequency of the modulation filter is lowered; the on-chip filter is formed with 27 pF||2 kΩ for small input signals. |
| 4 | PWDN | input | Power-Down Pin: the device operates as a detector with a logical low input (less than 100 mV), and a logic high greater than VS − 0.5 V turns it off. |
| 5 | RFIN | input | Signal Input Pin, which must be driven from an ac-coupled source with a low frequency real input impedance of 225 Ω. |
| 6 | VPOS | power_in | Supply Voltage Pin with an operational range of 2.7 V to 5.5 V. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-23-6 |
| Category | Interface ICs |
| Pins | 6 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Range | VS | 2.7 |  | 5.5 | V | −40°C < TA < +85°C | 3 |
| Conversion Gain |  | 6.5 |  | 8.5 | V/V rms | fRF = 100 MHz, VS = 5 V | 3 |
| Output Intercept (Ground Reference Mode) |  | -50 |  | 150 | mV | fRF = 100 MHz, VS = 5 V | 3 |
| Output Intercept (Internal Reference Mode) |  | 300 |  | 500 | mV | fRF = 100 MHz, VS = 5 V | 3 |
| Output Intercept (Supply Reference Mode) | VS/7.5 | 590 |  | 750 | mV | fRF = 100 MHz, VS = 5 V | 3 |
| Power-Down Current |  |  |  | 1 | µA | GRM or IRM, 0 mV rms at RFIN, PWDN Input HI | 3 |
| Supply Voltage | VS |  |  | 5.5 | V |  | 4 |
| RFIN Input Voltage | RFIN |  |  | 1 | V rms |  | 4 |
| Equivalent Power |  |  |  | 13 | dBm | re 50 Ω | 4 |
| Internal Power Dissipation |  |  |  | 170 | mW | 6-Lead SOT-23, free air | 4 |
| Maximum Junction Temperature |  |  |  | 125 | °C |  | 4 |
| Operating Temperature Range | TA | -40 |  | 85 | °C |  | 4 |
| Storage Temperature Range |  | -65 |  | 150 | °C |  | 4 |
| Lead Temperature Range |  |  |  | 300 | °C | Soldering 60 sec | 4 |
| Thermal Resistance Junction-to-Ambient | θJA |  | 230 |  | °C/W | 6-Lead SOT-23, free air | 4 |
| Thermal Resistance Junction-to-Case | θJC |  | 92 |  | °C/W | 6-Lead SOT-23 | 4 |

## CAD (KiCad official)

- Symbol: `AD8361ARTZ-RL7`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `ad8361artz-rl7-etched.step` / `ad8361artz-rl7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ad8361artz-rl7.step` / `ad8361artz-rl7.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/AD8361.pdf) (22 pp, sha256 `00124dab14bd94ad`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/ad8361artz-rl7-datasheet.pdf)