AD8352ACPZ-R7 from Analog Devices, in a LFCSP-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	RDP	passive	Positive distortion adjust pin, used with an external RD/CD network to tune distortion.
2	RGP	passive	Positive gain adjust pin, connected to external gain resistor RG (3 dB to 25 dB gain range).
3	RGN	passive	Negative gain adjust pin, connected to external gain resistor RG (3 dB to 25 dB gain range).
4	RDN	passive	Negative distortion adjust pin, used with an external RD/CD network to tune distortion.
5	VIN	power_in	Balanced differential input biased to VCM, typically ac-coupled; input resistance 3 kΩ.
6	GND	power_in	Ground; connect to low impedance GND.
7	GND	power_in	Ground; connect to low impedance GND.
8	VCC	power_in	Positive supply, 3 V to 5.5 V operation (absolute maximum 5.5 V).
9	GND	power_in	Ground; connect to low impedance GND.
10	VON	output	Balanced differential output biased to VCM, typically ac-coupled; nominal 100 Ω output resistance.
11	VOP	output	Balanced differential output biased to VCM, typically ac-coupled; nominal 100 Ω output resistance.
12	GND	power_in	Ground; connect to low impedance GND.
13	VCC	power_in	Positive supply, 3 V to 5.5 V operation (absolute maximum 5.5 V).
14	VCM	bidirectional	Common-mode voltage pin: a voltage applied sets input and output common mode (1.2 to 3.8 V range), typically decoupled with 0.1 µF, floats to VCC/2 if unreferenced.
15	ENB	input	Enable pin: apply positive voltage (1.3 V < ENB < VCC) to activate the device.
16	VIP	input	Balanced differential input biased to VCM, typically ac-coupled; input resistance 3 kΩ.
17	EP	passive	Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter	Value
Manufacturer	Analog Devices
Package	LFCSP-16(3x3)
Category	Radio Frequency Chip/Antenna
Pins	17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Output Common-Mode Offset		-100		20	mV	Referenced to VCC/2	3
Output Differential Offset Voltage		-20		20	mV		3
Input Bias Current		-5		5	µA		3
Gain Accuracy		-1		1	dB	Using 1% resistor for RG, 0 dB ≤ AV ≤ 20 dB	3
Supply Voltage	VS	3	5	5.5	V		3
Quiescent Current		35	37	39	mA	ENB at 3 V	3
Quiescent Current			5.3		mA	ENB at 0.6 V	3
-3 dB Bandwidth			2200		MHz	AV = 10 dB, VOUT ≤ 1.0 V p-p	3
Input Resistance			3		kΩ		3
Output Resistance			100		Ω		3
ENB Threshold			1.5		V		3
Supply Voltage, VCC	VCC			5.5	V		6
VIP, VIN	VIP, VIN			5.5	V	VCC + 0.5 V as printed	6
Internal Power Dissipation				210	mW		6
Maximum Junction Temperature				125	°C		6
Operating Temperature Range		-40		85	°C		6
Storage Temperature Range		-65		150	°C		6
Lead Temperature (Soldering 60 sec)				300	°C		6
Thermal Resistance	θJA		91.4		°C/W		6

CAD (KiCad official)

Symbol: AD8352ACPZ-R7
Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
3D model: LFCSP-16(3x3) (KiCad packages3D, STEP)
3D model files: ad8352acpz-r7-etched.step / ad8352acpz-r7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad8352acpz-r7.step / ad8352acpz-r7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Analog Devices datasheet (19 pp, sha256 132b22bf8f2f33f1, retrieved 2026-10-30, tier: manufacturer)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

AD8352ACPZ-R7

Verified AD8352ACPZ-R7

Verification log 1 record

3D Model

Symbol & Footprint

Schematic Symbol

PCB Footprint

Datasheet

README