main
Ray
Publish 0.1.0
8d13889
AD8330ARQZ-R7
Analog Devices · Programmable/Variable Gain Amplifiers (PGAs/VGAs) · SSOP-16-150mil
AD8330ARQZ-R7 from Analog Devices, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OFST | passive | Internal offset compensation feature: when left unconnected the feature is enabled, and when grounded it is disabled, with an external capacitor setting the offset loop high-pass corner. |
| 2 | ENBL | input | Power enable, active high. |
| 3 | VPSI | power_in | Positive supply for input stages; the specifications are given at VS = 5 V and the device operates from 2.7 V to 6 V with a 6 V absolute maximum supply. |
| 4 | INHI | input | Differential signal input, positive polarity, with a full-scale differential input of ±2 V at VDBS = 0 V and a 1 kΩ typical pin-to-pin input resistance. |
| 5 | INLO | input | Differential signal input, negative polarity, with a 1 kΩ typical pin-to-pin input resistance paired with INHI. |
| 6 | MODE | input | Logic input selecting gain slope: logic high (1.5 V) gives gain increasing with VDBS, and logic low (0.5 V) gives gain decreasing with VDBS. |
| 7 | VDBS | input | Input for the linear-in-dB gain control voltage, giving 0 dB to 50 dB gain for 0 V to 1.5 V at 30 mV/dB nominal. |
| 8 | CMGN | passive | Common baseline for the gain control interfaces; connect to COMM for the normal 0 V to 1.5 V VDBS range, or leave open for the elevated 0.2 V to 1.7 V range. |
| 9 | COMM | power_in | Ground for input and gain control bias circuitry. |
| 10 | VMAG | input | Input for gain/amplitude control; it internally defaults to 0.5 V when open, giving a peak output of ±2 V, and can be raised to 10 V p-p, limited by the supply voltage. |
| 11 | CMOP | power_in | Ground for output stages. |
| 12 | OPLO | output | Differential signal output, negative polarity, with 75 Ω output resistance per output and an essentially rail-to-rail swing into single-sided loads. |
| 13 | OPHI | output | Differential signal output, positive polarity, with 75 Ω output resistance per output and an essentially rail-to-rail swing into single-sided loads. |
| 14 | VPSO | power_in | Positive supply for output stages. |
| 15 | CNTR | input | Common-mode output voltage control, with a usable range of 0.5 V to 4.5 V that can be driven to within 0.5 V of ground or VS; the outputs default to VS/2. |
| 16 | VPOS | power_in | Positive supply for inner stages. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SSOP-16-150mil |
| Category | Operational Amplifier/Comparator |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-Mode Voltage Level (INHI, INLO) | 2.75 | 3 | 3.25 | V | 3 | ||
| Permissible CM Range | 0 | V | 3 | ||||
| Peak-to-Peak Output Swing | 1.8 | 2 | 2.2 | V | 3 | ||
| Common-Mode Voltage, Pin CNTR O/C | 2.4 | 2.5 | 2.6 | V | Pin CNTR O/C | 3 | |
| Offset Voltage, Offset Correction Enabled | -5 | 1 | 5 | mV | Offset correction enabled | 3 | |
| Offset Voltage, Offset Correction Disabled | -40 | 8 | 40 | mV | Pin OFST connected to ground | 3 | |
| Differential Output Impedance | 120 | 150 | 180 | Ω | Pin-to-pin | 3 | |
| Usable Voltage Range, Pin CNTR | 0.5 | 4.5 | V | 3 | |||
| Normal Voltage Range, VDBS/CMGN/MODE | 0 | 1.5 | V | CMGN connected to COMM | 3 | ||
| Elevated Voltage Range, VDBS/CMGN/MODE | 0.2 | 1.7 | V | CMGN O/C (VCMGN rises to 0.2 V) | 3 | ||
| Gain Scaling | 27 | 30 | 33 | mV/dB | Mode high or low | 3 | |
| Gain Linearity Error | -0.35 | 0.1 | 0.35 | dB | 0.3 V ≤ VDBS ≤ 1.2 V | 3 | |
| Absolute Gain Error | -2 | 0.5 | 2 | dB | VDBS = 0 V | 3 | |
| Peak Output Scaling, Gain vs. VMAG | 3.8 | 4 | 4.2 | V/V | 4 | ||
| Usable Input Range, Pin VMAG | 0 | 5 | V | 4 | |||
| Default Voltage, VMAG | 0.48 | 0.5 | 0.52 | V | VMAG O/C | 4 | |
| Logic Voltage for Hibernate Mode | 1.3 | 1.5 | 1.7 | V | Output pins remain at CNTR | 4 | |
| Current in Full Shutdown | 20 | 100 | µA | 4 | |||
| Supply Voltage | VS | 2.7 | 6 | V | 4 | ||
| Quiescent Current | 20 | 27 | mA | VDBS = 0.75 V | 4 | ||
| Supply Voltage (absolute maximum) | 6 | V | 5 | ||||
| Power Dissipation, 16-Lead QSOP Package | 0.62 | W | 4-layer JEDEC board (252P) | 5 | |||
| Storage Temperature Range | -65 | 150 | °C | 5 | |||
| Lead Temperature (Soldering) | 300 | °C | Soldering 60 sec | 5 | |||
| Operating Temperature Range | -40 | 85 | °C | 5 | |||
| Thermal Resistance θJA, 16-Lead QSOP | θJA | 105.4 | °C/W | 5 | |||
| Thermal Resistance θJC, 16-Lead QSOP | θJC | 39 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
AD8330ARQZ-R7 - Footprint:
Package_SO:SSOP-16_3.9x4.9mm_P0.635mm - 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files:
ad8330arqz-r7-etched.step/ad8330arqz-r7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad8330arqz-r7.step/ad8330arqz-r7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (32 pp, sha256
1f0f9ebcbdcc9778, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AD8330ARQZ-R7
**Analog Devices** · Programmable/Variable Gain Amplifiers (PGAs/VGAs) · SSOP-16-150mil
AD8330ARQZ-R7 from Analog Devices, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OFST | passive | Internal offset compensation feature: when left unconnected the feature is enabled, and when grounded it is disabled, with an external capacitor setting the offset loop high-pass corner. |
| 2 | ENBL | input | Power enable, active high. |
| 3 | VPSI | power_in | Positive supply for input stages; the specifications are given at VS = 5 V and the device operates from 2.7 V to 6 V with a 6 V absolute maximum supply. |
| 4 | INHI | input | Differential signal input, positive polarity, with a full-scale differential input of ±2 V at VDBS = 0 V and a 1 kΩ typical pin-to-pin input resistance. |
| 5 | INLO | input | Differential signal input, negative polarity, with a 1 kΩ typical pin-to-pin input resistance paired with INHI. |
| 6 | MODE | input | Logic input selecting gain slope: logic high (1.5 V) gives gain increasing with VDBS, and logic low (0.5 V) gives gain decreasing with VDBS. |
| 7 | VDBS | input | Input for the linear-in-dB gain control voltage, giving 0 dB to 50 dB gain for 0 V to 1.5 V at 30 mV/dB nominal. |
| 8 | CMGN | passive | Common baseline for the gain control interfaces; connect to COMM for the normal 0 V to 1.5 V VDBS range, or leave open for the elevated 0.2 V to 1.7 V range. |
| 9 | COMM | power_in | Ground for input and gain control bias circuitry. |
| 10 | VMAG | input | Input for gain/amplitude control; it internally defaults to 0.5 V when open, giving a peak output of ±2 V, and can be raised to 10 V p-p, limited by the supply voltage. |
| 11 | CMOP | power_in | Ground for output stages. |
| 12 | OPLO | output | Differential signal output, negative polarity, with 75 Ω output resistance per output and an essentially rail-to-rail swing into single-sided loads. |
| 13 | OPHI | output | Differential signal output, positive polarity, with 75 Ω output resistance per output and an essentially rail-to-rail swing into single-sided loads. |
| 14 | VPSO | power_in | Positive supply for output stages. |
| 15 | CNTR | input | Common-mode output voltage control, with a usable range of 0.5 V to 4.5 V that can be driven to within 0.5 V of ground or VS; the outputs default to VS/2. |
| 16 | VPOS | power_in | Positive supply for inner stages. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SSOP-16-150mil |
| Category | Operational Amplifier/Comparator |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-Mode Voltage Level (INHI, INLO) | | 2.75 | 3 | 3.25 | V | | 3 |
| Permissible CM Range | | 0 | | | V | | 3 |
| Peak-to-Peak Output Swing | | 1.8 | 2 | 2.2 | V | | 3 |
| Common-Mode Voltage, Pin CNTR O/C | | 2.4 | 2.5 | 2.6 | V | Pin CNTR O/C | 3 |
| Offset Voltage, Offset Correction Enabled | | -5 | 1 | 5 | mV | Offset correction enabled | 3 |
| Offset Voltage, Offset Correction Disabled | | -40 | 8 | 40 | mV | Pin OFST connected to ground | 3 |
| Differential Output Impedance | | 120 | 150 | 180 | Ω | Pin-to-pin | 3 |
| Usable Voltage Range, Pin CNTR | | 0.5 | | 4.5 | V | | 3 |
| Normal Voltage Range, VDBS/CMGN/MODE | | 0 | | 1.5 | V | CMGN connected to COMM | 3 |
| Elevated Voltage Range, VDBS/CMGN/MODE | | 0.2 | | 1.7 | V | CMGN O/C (VCMGN rises to 0.2 V) | 3 |
| Gain Scaling | | 27 | 30 | 33 | mV/dB | Mode high or low | 3 |
| Gain Linearity Error | | -0.35 | 0.1 | 0.35 | dB | 0.3 V ≤ VDBS ≤ 1.2 V | 3 |
| Absolute Gain Error | | -2 | 0.5 | 2 | dB | VDBS = 0 V | 3 |
| Peak Output Scaling, Gain vs. VMAG | | 3.8 | 4 | 4.2 | V/V | | 4 |
| Usable Input Range, Pin VMAG | | 0 | | 5 | V | | 4 |
| Default Voltage, VMAG | | 0.48 | 0.5 | 0.52 | V | VMAG O/C | 4 |
| Logic Voltage for Hibernate Mode | | 1.3 | 1.5 | 1.7 | V | Output pins remain at CNTR | 4 |
| Current in Full Shutdown | | | 20 | 100 | µA | | 4 |
| Supply Voltage | VS | 2.7 | | 6 | V | | 4 |
| Quiescent Current | | | 20 | 27 | mA | VDBS = 0.75 V | 4 |
| Supply Voltage (absolute maximum) | | | | 6 | V | | 5 |
| Power Dissipation, 16-Lead QSOP Package | | | | 0.62 | W | 4-layer JEDEC board (252P) | 5 |
| Storage Temperature Range | | -65 | | 150 | °C | | 5 |
| Lead Temperature (Soldering) | | | | 300 | °C | Soldering 60 sec | 5 |
| Operating Temperature Range | | -40 | | 85 | °C | | 5 |
| Thermal Resistance θJA, 16-Lead QSOP | θJA | | 105.4 | | °C/W | | 5 |
| Thermal Resistance θJC, 16-Lead QSOP | θJC | | 39 | | °C/W | | 5 |
## CAD (KiCad official)
- Symbol: `AD8330ARQZ-R7`
- Footprint: `Package_SO:SSOP-16_3.9x4.9mm_P0.635mm`
- 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files: `ad8330arqz-r7-etched.step` / `ad8330arqz-r7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ad8330arqz-r7.step` / `ad8330arqz-r7.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/AD8330.pdf) (32 pp, sha256 `1f0f9ebcbdcc9778`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ad8330arqz-r7-datasheet.pdf)