component
AD8302
Public Made by Adomby adom
IDCHIP Audio Amplifiers, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
AD8302
IDCHIP · Audio Amplifiers · SOP-8
AD8302 from IDCHIP, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SD | input | Shutdown control: a high level keeps the amplifier operating and a low level shuts it down, with VIH min 1.2 V and VIL max 0.9 V, and the pin must not be left floating. |
| 2 | NC | unconnected | No internal connection (empty pin). |
| 3 | BYP | output | Bias voltage output at VDD/2 that requires a bypass capacitor CB, where 0.1 µF to 1 µF ceramic is typical and 1 µF or larger is recommended to limit turn-on noise. |
| 4 | IN | input | Analog audio input whose external input resistor Ri sets the closed-loop gain according to Gain = (2 x 200 kΩ)/(6 kΩ + Ri). |
| 5 | VO1 | output | Analog class-D output 1, which drives the speaker together with VO2 and should be kept under 100 mm of wire without an output filter. |
| 6 | VDD | power_in | Positive supply, with recommended operating range 2.5 V to 6.0 V and absolute maximum 7.0 V. |
| 7 | GND | power_in | Power ground for the device. |
| 8 | VO2 | output | Analog class-D output 2, which forms the differential speaker output with VO1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | IDCHIP |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage (recommended) | VDD | 2.5 | 6 | V | 3 | ||
| Operating temperature | Topr | -40 | 85 | ℃ | 3 | ||
| SD input high level | VIH | 1.2 | V | 3 | |||
| SD input low level | VIL | 0.9 | V | 3 | |||
| Supply voltage | VDD | 7 | V | 3 | |||
| Input voltage | VIN | -0.3 | V | 3 | |||
| Human body model ESD voltage | HBM ESD | 2000 | V | 3 | |||
| Machine model ESD voltage | MM ESD | 250 | V | 3 | |||
| Storage temperature | TS | -65 | 150 | ℃ | 3 | ||
| Junction temperature | TJ | 150 | ℃ | 3 | |||
| Soldering temperature | TL | 260 | ℃ | within 10 s | 3 | ||
| Operating voltage | VDD | 2.5 | 6 | 6.5 | V | - | 3 |
| PSRR | PSRR | 60 | 68 | dB | Vripple=200mVPP, f=1KHz | 3 | |
| Quiescent current | IDD | 5 | mA | VDD=5V, no load | 3 | ||
| Shutdown current | IOFF | 5 | μA | 3 | |||
| Output offset voltage | VOS | 10 | mV | VIN=0V | 3 | ||
| PSRR | PSRR | 63 | dB | Vripple=200mVPP, f=217KHz | 3 | ||
| Total harmonic distortion plus noise | THD+N | 0.08 | % | PO=1W, RL=8Ω, f=1KHz | 3 | ||
| Output power | PO | 5 | W | VDD=5V, THD+N=10%, f=1KHz, RL=2Ω | 4 | ||
| Output power | PO | 4 | W | VDD=5V, THD+N=1%, f=1KHz, RL=2Ω | 4 | ||
| Output power | PO | 3.1 | W | VDD=5V, THD+N=10%, f=1KHz, RL=4Ω | 4 | ||
| Output power | PO | 2.5 | W | VDD=5V, THD+N=1%, f=1KHz, RL=4Ω | 4 | ||
| Output power | PO | 1.8 | W | VDD=3.7V, THD+N=10%, f=1KHz, RL=4Ω | 4 | ||
| Output power | PO | 1.4 | W | VDD=3.7V, THD+N=1%, f=1KHz, RL=4Ω | 4 | ||
| Junction-to-case thermal resistance (SOP) | θJC(SOP) | 35 | oC/W | 3 | |||
| Junction-to-ambient thermal resistance (SOP) | θJA(SOP) | 140 | oC/W | 3 |
CAD (KiCad official)
- Symbol:
AD8302 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ad8302-etched.step/ad8302-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad8302.step/ad8302.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: IDCHIP datasheet (6 pp, sha256
033634e99b1f96b6, retrieved 2026-10-15, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AD8302
**IDCHIP** · Audio Amplifiers · SOP-8
AD8302 from IDCHIP, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SD | input | Shutdown control: a high level keeps the amplifier operating and a low level shuts it down, with VIH min 1.2 V and VIL max 0.9 V, and the pin must not be left floating. |
| 2 | NC | unconnected | No internal connection (empty pin). |
| 3 | BYP | output | Bias voltage output at VDD/2 that requires a bypass capacitor CB, where 0.1 µF to 1 µF ceramic is typical and 1 µF or larger is recommended to limit turn-on noise. |
| 4 | IN | input | Analog audio input whose external input resistor Ri sets the closed-loop gain according to Gain = (2 x 200 kΩ)/(6 kΩ + Ri). |
| 5 | VO1 | output | Analog class-D output 1, which drives the speaker together with VO2 and should be kept under 100 mm of wire without an output filter. |
| 6 | VDD | power_in | Positive supply, with recommended operating range 2.5 V to 6.0 V and absolute maximum 7.0 V. |
| 7 | GND | power_in | Power ground for the device. |
| 8 | VO2 | output | Analog class-D output 2, which forms the differential speaker output with VO1. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | IDCHIP |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage (recommended) | VDD | 2.5 | | 6 | V | | 3 |
| Operating temperature | Topr | -40 | | 85 | ℃ | | 3 |
| SD input high level | VIH | | 1.2 | | V | | 3 |
| SD input low level | VIL | | 0.9 | | V | | 3 |
| Supply voltage | VDD | | | 7 | V | | 3 |
| Input voltage | VIN | -0.3 | | | V | | 3 |
| Human body model ESD voltage | HBM ESD | | | 2000 | V | | 3 |
| Machine model ESD voltage | MM ESD | | | 250 | V | | 3 |
| Storage temperature | TS | -65 | | 150 | ℃ | | 3 |
| Junction temperature | TJ | | | 150 | ℃ | | 3 |
| Soldering temperature | TL | | | 260 | ℃ | within 10 s | 3 |
| Operating voltage | VDD | 2.5 | 6 | 6.5 | V | - | 3 |
| PSRR | PSRR | 60 | 68 | | dB | Vripple=200mVPP, f=1KHz | 3 |
| Quiescent current | IDD | | 5 | | mA | VDD=5V, no load | 3 |
| Shutdown current | IOFF | | 5 | | μA | | 3 |
| Output offset voltage | VOS | | 10 | | mV | VIN=0V | 3 |
| PSRR | PSRR | | 63 | | dB | Vripple=200mVPP, f=217KHz | 3 |
| Total harmonic distortion plus noise | THD+N | | 0.08 | | % | PO=1W, RL=8Ω, f=1KHz | 3 |
| Output power | PO | | 5 | | W | VDD=5V, THD+N=10%, f=1KHz, RL=2Ω | 4 |
| Output power | PO | | 4 | | W | VDD=5V, THD+N=1%, f=1KHz, RL=2Ω | 4 |
| Output power | PO | | 3.1 | | W | VDD=5V, THD+N=10%, f=1KHz, RL=4Ω | 4 |
| Output power | PO | | 2.5 | | W | VDD=5V, THD+N=1%, f=1KHz, RL=4Ω | 4 |
| Output power | PO | | 1.8 | | W | VDD=3.7V, THD+N=10%, f=1KHz, RL=4Ω | 4 |
| Output power | PO | | 1.4 | | W | VDD=3.7V, THD+N=1%, f=1KHz, RL=4Ω | 4 |
| Junction-to-case thermal resistance (SOP) | θJC(SOP) | | 35 | | oC/W | | 3 |
| Junction-to-ambient thermal resistance (SOP) | θJA(SOP) | | 140 | | oC/W | | 3 |
## CAD (KiCad official)
- Symbol: `AD8302`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `ad8302-etched.step` / `ad8302-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ad8302.step` / `ad8302.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [IDCHIP datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590316479029026816) (6 pp, sha256 `033634e99b1f96b6`, retrieved 2026-10-15, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ad8302-datasheet.pdf)