component
AD8217BRMZ-R7
Public Made by Adomby adom
Analog Devices Current Sense Amplifiers, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAD8217BRMZ-R7
Analog Devices · Current Sense Amplifiers · MSOP-8
AD8217BRMZ-R7 from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +IN | input | Non-inverting input, which also supplies the internal LDO; common-mode range is 4.5 V to 80 V, and the absolute maximum input voltage is 0 V to 85 V with respect to GND. |
| 2 | NC | unconnected | No connect; not internally connected to the die. |
| 3 | NC | unconnected | No connect; not internally connected to the die. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | OUT | output | Ground-referenced buffered output for connection to an ADC or converter; the output is clamped at 5.6 V maximum when +IN is above 5.6 V. |
| 6 | NC | unconnected | No connect; not internally connected to the die. |
| 7 | NC | unconnected | No connect; not internally connected to the die. |
| 8 | -IN | input | Inverting input; the absolute maximum differential input voltage (+IN to -IN) is ±1 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Gain accuracy, initial | -0.1 | 0.1 | % | VO ≥ 0.1 V dc, TA | 3 | ||
| Gain accuracy over temperature range | -0.35 | 0.35 | % | TOPR | 3 | ||
| Input offset voltage (RTI) at 25°C | VOSI | -250 | 250 | µV | 25°C | 3 | |
| Input offset voltage (RTI) over temperature range | VOSI | -300 | 300 | µV | TOPR | 3 | |
| Input bias current | 500 | 800 | µA | 3 | |||
| Common-mode input voltage range | 4.5 | 80 | V | Common-mode, continuous | 3 | ||
| Common-mode rejection ratio (CMRR) | CMRR | 90 | 100 | dB | 3 | ||
| Output voltage range, lower limit | 0.01 | V | TA | 3 | |||
| Supply (operating) voltage range | 4.5 | 80 | V | 3 | |||
| Quiescent current over temperature range | 800 | µA | TOPR (full temperature range) | 3 | |||
| Power supply rejection ratio (PSRR) | PSRR | 90 | 110 | dB | Supply regulated from common-mode, entire input common-mode range | 3 | |
| Maximum input voltage (+IN, −IN to GND) | 0 | 85 | V | +IN, −IN to GND | 4 | ||
| Differential input voltage (+IN to −IN) | -1 | 1 | V | +IN to −IN | 4 | ||
| HBM ESD rating | -2000 | 2000 | V | Human body model (HBM) | 4 | ||
| Operating temperature range | TOPR | -40 | 125 | °C | 4 | ||
| Storage temperature range | -65 | 150 | °C | 4 |
CAD (KiCad official)
- Symbol:
AD8217BRMZ-R7 - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ad8217brmz-r7-etched.step/ad8217brmz-r7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad8217brmz-r7.step/ad8217brmz-r7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
5da4c159ff43cad6, retrieved 2026-10-20, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).