Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

AD8214ARMZ-R7

Analog Devices · Current-Sensing Amplifiers · MSOP-8

AD8214ARMZ-R7 from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VS power_in Supply voltage; the operating range is 5 V to 65 V measured from GND to VS, and the output voltage must stay within 2.4 V of the supply.
2 +IN input Noninverting comparator input used as the threshold node, with the common-mode range specified from VS - 0.9 V to VS + 0.2 V.
3 VREG power_out Regulator voltage output, nominally 2.43 V (±5% over temperature) below VS, available to set the threshold through external resistors.
4 NC unconnected No connect.
5 OUT output Current-output comparator driver that sources about 1 mA when high and about 100 nA when low, with load voltage limited to 0 V to (VS - 2.4 V).
6 GND power_in Ground reference for the device supply, against which the 5 V to 65 V operating range is specified.
7 NC unconnected No connect.
8 -IN input Inverting comparator input; the output switches to high when +IN exceeds -IN, with about 10 mV of hysteresis before it returns low.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package MSOP-8
Category Amplifiers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Offset Voltage (RTI) -3 3 mV TA = 25°C, voltage at -IN decreasing 3
Offset Voltage over temperature (RTI) -8 8 mV 3
Offset Drift -10 10 µV/°C 3
Hysteresis 5 12 mV TA = 25°C, voltage at -IN increasing 3
Common Mode Voltage Range -0.9 0.2 V Referenced to VS; printed as VS, 0.9 (min) and VS + 0.2 (max) 3
Differential Maximum Voltage between +IN and -IN 500 mV Maximum voltage between +IN and -IN 3
Input Bias Current -30 12 30 nA +IN or -IN 3
Output Current, output high 0.8 1 1.2 mA ROUT = 3.3 kΩ, output high 3
Output Current, output low -5 5 µA ROUT = 3.3 kΩ, output low 3
Regulator Nominal Value tolerance -5 5 % TA = -40°C to +125°C 3
Output Voltage Range 2 62.5 V With respect to VREG 3
Operating Range, Maximum Voltage VS 65 V GND to VS 3
Operating Range, Minimum Voltage VS 5 V GND to VS 3
Temperature Range for Specified Performance -40 125 °C 3
Supply Voltage 65 V TA = -40°C to +125°C 4
Continuous Input Voltage 68 V TA = -40°C to +125°C 4
Differential Input Voltage 500 mV TA = -40°C to +125°C 4
Reverse Supply Voltage 0.3 V TA = -40°C to +125°C 4
Storage Temperature Range -65 150 °C 4

CAD (KiCad official)

  • Symbol: AD8214ARMZ-R7
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: ad8214armz-r7-etched.step / ad8214armz-r7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad8214armz-r7.step / ad8214armz-r7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (16 pp, sha256 9da0e4fda7c9731d, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF