AD8210YRZ

{
  "slug": "ad8210yrz",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Current-Sensing Amplifiers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers",
    "ad8210yrz",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ad8210yrz.kicad_sym",
    "ad8210yrz.kicad_mod",
    "ad8210yrz.glb",
    "ad8210yrz.step",
    "ad8210yrz.lbr",
    "docs/hero.png",
    "docs/ad8210yrz-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ad8210yrz-hero.glb",
    "ad8210yrz-hero.overlay.json",
    "ad8210yrz-etched.glb"
  ],
  "component": {
    "mpn": "AD8210YRZ",
    "manufacturer": "Analog Devices",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Amplifiers",
    "subcategory": "Current-Sensing Amplifiers",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/AD8210.pdf",
    "parts": {
      "symbol": "ad8210yrz.kicad_sym",
      "footprint": "ad8210yrz.kicad_mod",
      "model_3d": "ad8210yrz-hero.glb",
      "model_3d_plain": "ad8210yrz-etched.glb",
      "model_3d_step": "ad8210yrz-etched.step",
      "model_3d_step_plain": "ad8210yrz.step",
      "lbr": "ad8210yrz.lbr"
    },
    "distributor_links": {
      "lcsc": "C207962",
      "mouser": "584-AD8210YRZ"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T23:51:25Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 988 calls left today"
      },
      "mouser": {
        "pn": "584-AD8210YRZ",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "-IN",
        "type": "input",
        "description": "Inverting differential sense input connected to the low-potential side of the shunt, with all input voltages referred to -IN and a fixed gain of +20."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection; in ground referenced output mode both VREF pins are tied here so the output sits near the negative rail when the differential input is 0 V."
      },
      {
        "number": "3",
        "name": "VREF2",
        "type": "input",
        "description": "Reference input that sets the output offset; it must lie between 0 V and VS (0 V ≤ VREF ≤ VS) and is tied to GND or V+ to select the output mode."
      },
      {
        "number": "4",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect pin, not internally connected per the pin configuration."
      },
      {
        "number": "5",
        "name": "OUT",
        "type": "output",
        "description": "Output voltage VOUT = (ISHUNT × RSHUNT) × 20; in unidirectional operation full scale is approximately 250 mV across the shunt."
      },
      {
        "number": "6",
        "name": "V+",
        "type": "power_in",
        "description": "Positive supply connection; the examples in the datasheet use V+ = 5 V, and in V+ referenced output mode the output rests near this rail at 0 V differential input."
      },
      {
        "number": "7",
        "name": "VREF1",
        "type": "input",
        "description": "Reference input that sets the output offset; it must lie between 0 V and VS (0 V ≤ VREF ≤ VS) and is tied to GND or V+ to select the output mode."
      },
      {
        "number": "8",
        "name": "+IN",
        "type": "input",
        "description": "Non-inverting differential sense input connected to the high-potential side of the shunt, amplified with a gain of +20."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The ordering guide (page 15 in the datasheet, which lists AD8210YRZ and its package code) is not in ; The pin function table (Table 3, referenced in the revision history) is not in the supplied text. Pi; The supply voltage range and absolute maximum ratings for V+ are not in the supplied text; only the ",
          "2/8 pins cited to the wrong page (name found elsewhere): ['3:VREF2@p12', '7:VREF1@p12']"
        ],
        "pages_sent": 15,
        "cost_usd": 0.0375,
        "at": "2026-10-28T23:51:07"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/AD8210.pdf",
        "pages": 15,
        "sha256": "a4cef69f76d7f210",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ad8210yrz.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ad8210yrz-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c95932aa4e9a40e764737451f2453b52fd7c12c60692d6601eb42b7ee6b8e074",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}