Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

AD818ARZ-REEL7

Analog Devices · Operational Amplifier · SOIC-8

AD818ARZ-REEL7 from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NULL passive Offset null pin; a 10 kΩ potentiometer between pins 1 and 8 with wiper to -VS gives about ±10 mV null range.
2 -IN input Inverting input; differential input voltage limited to ±6 V, so a series protection resistor is needed for overloads beyond that.
3 +IN input Non-inverting input; differential input voltage limited to ±6 V and common-mode input limited to ±VS.
4 -VS power_in Negative supply (ground in single-supply use); dual supply operating range ±2.5 V to ±18 V, absolute maximum ±18 V.
5 NC unconnected No connect; pin is not internally connected.
6 OUTPUT output Op amp output delivering 50 mA minimum output current and short-circuit current of 90 mA typical at ±15 V.
7 +VS power_in Positive supply; single supply range +5 V to +36 V, absolute maximum ±18 V total dual supply.
8 NULL passive Offset null pin; used with pin 1 and a 10 kΩ potentiometer to trim input offset voltage.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOIC-8
Category Amplifiers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS 0.5 2 mV VS = ±5 V to ±15 V 2
Input Offset Voltage over temperature VOS 3 mV TMIN to TMAX 2
Input Bias Current IB 3.3 6.6 mA VS = ±5 V, ±15 V 2
Input Offset Current IOS 25 300 nA VS = ±5 V, ±15 V 2
Input Offset Current over temperature IOS 500 nA TMIN to TMAX 2
Common-Mode Rejection CMR 82 100 dB VCM = ±2.5 V, VS = ±5 V 2
Common-Mode Rejection CMR 86 120 dB VCM = ±12 V, VS = ±15 V 2
Common-Mode Rejection over temperature CMR 84 100 dB TMIN to TMAX, ±15 V 2
Power Supply Rejection PSRR 80 90 dB VS = ±5 V to ±15 V 3
Power Supply Rejection over temperature PSRR 80 dB TMIN to TMAX 3
Input Common-Mode Voltage Range high VCM 3.8 4.3 V VS = ±5 V 3
Input Common-Mode Voltage Range high VCM 13 14.3 V VS = ±15 V 3
Output Voltage Swing VOUT 3.3 3.8 V RLOAD = 500 Ω, VS = ±5 V 3
Output Voltage Swing VOUT 3.2 3.6 V RLOAD = 150 Ω, VS = ±5 V 3
Output Voltage Swing VOUT 13.3 13.7 V RLOAD = 1 kΩ, VS = ±15 V 3
Output Voltage Swing VOUT 12.8 13.4 V RLOAD = 500 Ω, VS = ±15 V 3
Output Current IOUT 50 mA VS = ±15 V 3
Output Current IOUT 30 mA VS = 0 V, +5 V 3
Operating Range Dual Supply VS 2.5 18 V Dual Supply, ± 3
Operating Range Single Supply VS 5 36 V Single Supply 3
Quiescent Current IQ 7 7.5 mA VS = ±5 V 3
Quiescent Current over temperature IQ 7.5 mA TMIN to TMAX, ±5 V 3
Quiescent Current IQ 7.5 mA VS = ±15 V 3
Quiescent Current over temperature IQ 7 7.5 mA TMIN to TMAX, ±15 V 3
Supply Voltage 18 V ± 4
Differential Input Voltage -6 6 V 4
Storage Temperature Range -65 125 °C N, R packages 4
Operating Temperature Range -40 85 °C 4
Lead Temperature 300 °C Soldering 10 sec 4
Thermal Resistance Junction-Ambient θJA 155 °C/W 8-lead SOIC package, free air 4
-3 dB Bandwidth 70 95 MHz Gain = +2, VS = ±5 V 2
-3 dB Bandwidth 100 130 MHz Gain = +2, VS = ±15 V 2
Slew Rate 350 400 V/ms RLOAD = 1 kΩ, Gain = -1, VS = ±5 V 2
Slew Rate 450 500 V/ms Gain = -1, VS = ±15 V 2

CAD (KiCad official)

  • Symbol: AD818ARZ-REEL7
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ad818arz-reel7-etched.step / ad818arz-reel7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad818arz-reel7.step / ad818arz-reel7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (15 pp, sha256 44d4797e8f11f414, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF