component
AD8130ARZ-REEL
Public Made by Adomby adom
Analog Devices Operational Amplifier, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAD8130ARZ-REEL
Analog Devices · Operational Amplifier · SOIC-8
AD8130ARZ-REEL from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +IN | input | Non-inverting differential input, with very high input impedance (1 MΩ differential) and an input common-mode range of ±10.5 V. |
| 2 | -VS | power_in | Negative supply pin; the datasheet gives a supply range of +4.5 V to ±12.6 V. |
| 3 | PD | input | Power-down pin for the amplifier; the pages provided do not state its logic levels or timing. |
| 4 | REF | input | Reference pin shown in the connection diagram; the pages provided do not describe its function or limits. |
| 5 | FB | input | Feedback pin used with the external resistor network to set the gain G = 1 + RF/RG; the pages provided do not give its limits. |
| 6 | OUT | output | Single-ended output of the differential-to-single-ended receiver, with gain set by the ratio of two external resistors. |
| 7 | +VS | power_in | Positive supply pin; the datasheet gives a supply range of +4.5 V to ±12.6 V. |
| 8 | -IN | input | Inverting differential input, with very high input impedance (1 MΩ differential) and an input common-mode range of ±10.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-8 |
| Category | Amplifiers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Slew rate (5 V supply) | 810 | 930 | V/μs | VOUT = 2 V p-p, 25% to 75% | 3 | ||
| CMRR (5 V supply) | 86 | 96 | dB | DC to 100 kHz, VCM = 1.5 V to 3.5 V | 3 | ||
| Common-mode voltage range (5 V supply) | 1.25 | 3.8 | V | V+IN − V−IN = 0 V | 3 | ||
| Differential clipping level (5 V supply) | 2.3 | 2.8 | 3.3 | V | 3 | ||
| Closed-loop gain error (5 V supply) | -0.6 | 0.1 | 0.6 | % | VOUT = ±1 V, RL ≥ 150 Ω | 4 | |
| Input offset voltage (5 V supply) | 0.4 | 1.8 | mV | 4 | |||
| Input offset voltage vs. supply (5 V supply) | -74 | -70 | dB | +VS = 5 V, −VS = −0.5 V to +0.5 V | 4 | ||
| Input offset voltage vs. supply (5 V supply) | -90 | -76 | dB | −VS = 0 V, +VS = +4.5 V to +5.5 V | 4 | ||
| Input bias current (+IN, −IN) (5 V supply) | -2 | 0.5 | 2 | μA | 4 | ||
| Input bias current (REF, FB) (5 V supply) | -3.5 | 1 | 3.5 | μA | 4 | ||
| Input offset current (+IN, −IN, REF, FB) (5 V supply) | -0.4 | 0.08 | 0.4 | μA | 4 | ||
| Voltage swing (5 V supply) | 1.1 | 3.9 | V | RLOAD ≥ 150 Ω | 4 | ||
| Short-circuit current (5 V supply) | -60 | 55 | mA | To common | 4 | ||
| Quiescent supply current (5 V supply) | 9.9 | 10.6 | mA | 4 | |||
| Quiescent supply current in power-down (5 V supply) | 0.65 | 0.85 | mA | PD ≤ VIL | 4 | ||
| Operating voltage range (total supply) | 2.25 | 12.6 | V | Total supply voltage | 4 | ||
| Operating temperature range (5 V supply) | -40 | 125 | °C | 4 | |||
| Slew rate (±5 V supply) | 950 | 1090 | V/μs | VOUT = 2 V p-p, 25% to 75% | 5 | ||
| CMRR (±5 V supply) | 90 | 110 | dB | DC to 100 kHz, VCM = −3 V to +3.5 V | 5 | ||
| Common-mode voltage range (±5 V supply) | -3.8 | 3.8 | V | V+IN − V−IN = 0 V | 5 | ||
| Differential clipping level (±5 V supply) | 2.3 | 2.8 | 3.3 | V | 5 | ||
| Closed-loop gain error (±5 V supply) | -0.6 | 0.15 | 0.6 | % | VOUT = ±1 V, RL ≥ 150 Ω | 6 | |
| Input offset voltage (±5 V supply) | 0.4 | 1.8 | mV | 6 | |||
| Input offset voltage vs. supply (±5 V supply) | -78 | -74 | dB | +VS = +5 V, −VS = −4.5 V to −5.5 V | 6 | ||
| Input offset voltage vs. supply (±5 V supply) | -80 | -74 | dB | −VS = −5 V, +VS = +4.5 V to +5.5 V | 6 | ||
| Input bias current (+IN, −IN) (±5 V supply) | -2 | 0.5 | 2 | μA | 6 | ||
| Input bias current (REF, FB) (±5 V supply) | -3.5 | 1 | 3.5 | μA | 6 | ||
| Input offset current (+IN, −IN, REF, FB) (±5 V supply) | -0.4 | 0.08 | 0.4 | μA | 6 | ||
| Voltage swing (±5 V supply) | 3.6 | V | RLOAD = 150 Ω | 6 | |||
| Voltage swing (±5 V supply) | 4 | V | RLOAD = 1 kΩ | 6 | |||
| Short-circuit current (±5 V supply) | -60 | 55 | mA | To common | 6 | ||
| Quiescent supply current (±5 V supply) | 10.8 | 11.6 | mA | 6 | |||
| Quiescent supply current in power-down (±5 V supply) | 0.68 | 0.85 | mA | PD ≤ VIL | 6 | ||
| Operating temperature range (±5 V supply) | -40 | 125 | °C | 6 | |||
| Slew rate (±12 V supply) | 960 | 1100 | V/μs | VOUT = 2 V p-p, 25% to 75% | 7 | ||
| CMRR (±12 V supply) | 88 | 105 | dB | DC to 100 kHz, VCM = ±10 V | 7 | ||
| Common-mode voltage range (±12 V supply) | -10.5 | 10.5 | V | V+IN − V-IN = 0 V | 7 | ||
| Differential clipping level (±12 V supply) | 2.3 | 2.8 | 3.3 | V | 7 | ||
| Closed-loop gain error (±12 V supply) | -0.6 | 0.15 | 0.6 | % | VOUT = ±1 V, RL ≥ 150 Ω | 8 | |
| Input offset voltage (±12 V supply) | 0.4 | 1.8 | mV | 8 | |||
| Input offset voltage vs. supply (±12 V supply) | -77 | -70 | dB | +VS = +12 V, −VS = −11.0 V to −13.0 V | 8 | ||
| Input offset voltage vs. supply (±12 V supply) | -88 | -70 | dB | −VS = −12 V, +VS = +11.0 V to +13.0 V | 8 | ||
| Input bias current (+IN, −IN) (±12 V supply) | -2 | 0.25 | 2 | μA | 8 | ||
| Input bias current (REF, FB) (±12 V supply) | -3.5 | 0.5 | 3.5 | μA | 8 | ||
| Input offset current (+IN, −IN, REF, FB) (±12 V supply) | -0.4 | 0.08 | 0.4 | μA | 8 | ||
| Voltage swing (±12 V supply) | 10.8 | V | RLOAD = 700 Ω | 8 | |||
| Short-circuit current (±12 V supply) | -60 | 55 | mA | To common | 8 | ||
| Quiescent supply current (±12 V supply) | 13 | 13.9 | mA | 8 | |||
| Quiescent supply current in power-down (±12 V supply) | 0.73 | 0.9 | mA | PD ≤ VIL | 8 | ||
| Operating temperature range (±12 V supply) | -40 | 85 | °C | 8 | |||
| Supply voltage | 26.4 | V | 9 | ||||
| Differential input voltage (AD8130) | -8.4 | 8.4 | V | 9 | |||
| Storage temperature range | -65 | 150 | °C | 9 | |||
| Lead temperature (soldering) | 300 | °C | Soldering, 10 sec | 9 | |||
| Junction temperature | 150 | °C | 9 | ||||
| Thermal resistance θJA (8-lead SOIC) | θJA | 121 | °C/W | 8-Lead SOIC/4-Layer, still air | 9 |
CAD (KiCad official)
- Symbol:
AD8130ARZ-REEL - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ad8130arz-reel-etched.step/ad8130arz-reel-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad8130arz-reel.step/ad8130arz-reel.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (40 pp, sha256
045cf9ebbe2fb377, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).