AD8099ARDZ

{
  "slug": "ad8099ardz",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Operational Amplifier, SOIC-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "ad8099ardz",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ad8099ardz.kicad_sym",
    "ad8099ardz.kicad_mod",
    "ad8099ardz.glb",
    "ad8099ardz.step",
    "ad8099ardz.lbr",
    "docs/hero.png",
    "docs/ad8099ardz-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ad8099ardz-hero.glb",
    "ad8099ardz-hero.overlay.json",
    "ad8099ardz-etched.glb"
  ],
  "component": {
    "mpn": "AD8099ARDZ",
    "manufacturer": "Analog Devices",
    "package": "SOIC-8-EP",
    "pin_count": 9,
    "category": "Amplifiers/Comparators",
    "subcategory": "Operational Amplifier",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588901756269178880",
    "parts": {
      "symbol": "ad8099ardz.kicad_sym",
      "footprint": "ad8099ardz.kicad_mod",
      "model_3d": "ad8099ardz-hero.glb",
      "model_3d_plain": "ad8099ardz-etched.glb",
      "model_3d_step": "ad8099ardz-etched.step",
      "model_3d_step_plain": "ad8099ardz.step",
      "lbr": "ad8099ardz.lbr"
    },
    "distributor_links": {
      "lcsc": "C208141",
      "digikey": "505-AD8099ARDZ-ND",
      "mouser": "584-AD8099ARDZ"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T05:47:34Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-AD8099ARDZ-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-AD8099ARDZ",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "FEEDBACK",
        "type": "output",
        "description": "Secondary output pin on the opposite side of the package for connecting the feedback network, which isolates capacitive loads and package inductance from the feedback loop."
      },
      {
        "number": "2",
        "name": "-IN",
        "type": "input",
        "description": "Inverting input; internal anti-parallel diode pairs limit the differential input voltage to approximately 1.8 V, and all pins are ESD protected with diodes limiting currents to 5 mA or less."
      },
      {
        "number": "3",
        "name": "+IN",
        "type": "input",
        "description": "Noninverting input; internal anti-parallel diode pairs limit the differential input voltage to approximately 1.8 V, and all pins are ESD protected with diodes limiting currents to 5 mA or less."
      },
      {
        "number": "4",
        "name": "-VS",
        "type": "power_in",
        "description": "Negative power supply pin; the AD8099 operates over a 5 V to 12 V supply range, and the exposed pad should be soldered to the ground plane."
      },
      {
        "number": "5",
        "name": "CC",
        "type": "passive",
        "description": "External compensation pin, where a typical CC range of 0 pF to 5 pF and an RC network set the gain bandwidth, and no PCB trace should be connected to or near it to reach full GBWP."
      },
      {
        "number": "6",
        "name": "VOUT",
        "type": "output",
        "description": "Primary output pin, which drives 100 Ω loads at the datasheet's stated performance levels."
      },
      {
        "number": "7",
        "name": "+VS",
        "type": "power_in",
        "description": "Positive power supply pin; the AD8099 operates over a 5 V to 12 V supply range."
      },
      {
        "number": "8",
        "name": "DISABLE",
        "type": "input",
        "description": "Three-state input where pulling it low places the output in a high-impedance state, leaving it floating enables normal operation, and bringing it within 0.7 V of +VS reduces input bias current to below 200 nA."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet's SOIC-EP pinout (Figure 2) lists eight numbered leads only. The exposed paddle on the; The FEEDBACK pin type is marked output because the datasheet describes it as a secondary output pin.; The supply range of 5 V to 12 V comes from the General Description and Features sections rather than",
          "exposed pad 9 added from the footprint"
        ],
        "pages_sent": 13,
        "cost_usd": 0.0788,
        "at": "2026-10-19T05:47:19"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588901756269178880",
        "pages": 26,
        "sha256": "96b659cb37add3da",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ad8099ardz.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.55
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ad8099ardz-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.55
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "501496dbf4d1b4bcc1fdd56189f9294c1de5621bea2f172644764e9b871e70c0",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}