Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

AD8042ARZ-REEL7

Analog Devices · Operational Amplifier · SOP-8

AD8042ARZ-REEL7 from Analog Devices, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Output of amplifier 1, which swings to within 30 mV of either supply rail and can drive 50 mA.
2 -IN1 input Inverting input of amplifier 1; on a 5 V supply the common-mode input range is −0.2 V to +4 V (Table 1).
3 +IN1 input Non-inverting input of amplifier 1; the input can go 0.2 V below the negative rail without phase reversal.
4 -VS power_in Negative supply rail; the device operates from a 3 V to 12 V total supply (single or ±5 V split) with an absolute maximum supply of 12.6 V.
5 +IN2 input Non-inverting input of amplifier 2; the input can go 0.2 V below the negative rail without phase reversal.
6 -IN2 input Inverting input of amplifier 2; on a 5 V supply the common-mode input range is −0.2 V to +4 V (Table 1).
7 OUT2 output Output of amplifier 2, which swings to within 30 mV of either supply rail and can drive 50 mA.
8 +VS power_in Positive supply rail; the device operates from a 3 V to 12 V total supply with an absolute maximum supply of 12.6 V.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
−3 dB Small Signal Bandwidth 125 160 MHz VS = 5 V, TA = 25°C; G = +1, VO < 0.5 V p-p 3
Slew Rate 130 200 V/μs VS = 5 V, TA = 25°C; G = -1, VOUT = 2 V step 3
Differential Gain Error (NTSC, 100 IRE) 0.04 0.06 % VS = 5 V, TA = 25°C; G = +2, RL = 150 Ω to 2.5 V 3
Differential Phase Error (NTSC, 100 IRE) 0.06 0.12 Degrees VS = 5 V, TA = 25°C; G = +2, RL = 150 Ω to 2.5 V 3
Input Offset Voltage 3 9 mV VS = 5 V, TA = 25°C 3
Input Bias Current 1.2 3.2 μA VS = 5 V, TA = 25°C 3
Input Offset Current 0.2 0.5 μA VS = 5 V, TA = 25°C 3
Open-Loop Gain 90 100 dB VS = 5 V, TA = 25°C; RL = 1 kΩ 3
Common-Mode Rejection Ratio 68 74 dB VS = 5 V, TA = 25°C; VCM = 0 V to 3.5 V 3
Quiescent Current (Per Amplifier) 5.5 6.4 mA VS = 5 V, TA = 25°C 3
Power Supply Rejection Ratio 72 80 dB VS = 5 V, TA = 25°C; VS- = 0 V to −1 V, or VS+ = 5 V to 6 V 3
Input Common-Mode Voltage Range -0.2 4 V VS = 5 V, TA = 25°C 3
−3 dB Small Signal Bandwidth 120 140 MHz VS = 3 V, TA = 25°C; G = +1, VO < 0.5 V p-p 4
Slew Rate 120 170 V/μs VS = 3 V, TA = 25°C; G = −1, VOUT = 2 V step 4
Input Offset Voltage 3 9 mV VS = 3 V, TA = 25°C 4
Input Bias Current 1.2 3.2 μA VS = 3 V, TA = 25°C 4
Input Offset Current 0.2 0.6 μA VS = 3 V, TA = 25°C 4
Open-Loop Gain 90 100 dB VS = 3 V, TA = 25°C; RL = 1 kΩ 4
Common-Mode Rejection Ratio 66 74 dB VS = 3 V, TA = 25°C; VCM = 0 V to 1.5 V 4
Quiescent Current (Per Amplifier) 5.5 6.4 mA VS = 3 V, TA = 25°C 4
Power Supply Rejection Ratio 68 80 dB VS = 3 V, TA = 25°C; VS- = 0 V to -1 V, or VS+ = 3 V to 4 V 4
Input Common-Mode Voltage Range -0.2 2 V VS = 3 V, TA = 25°C 4
−3 dB Small Signal Bandwidth 125 170 MHz VS = ±5 V, TA = 25°C; G = +1, VO < 0.5 V p-p 5
Slew Rate 145 225 V/μs VS = ±5 V, TA = 25°C; G = -1, VOUT = 2 V step 5
Differential Gain Error (NTSC, 100 IRE) 0.02 0.05 % VS = ±5 V, TA = 25°C; G = +2, RL = 150 Ω 5
Differential Phase Error (NTSC, 100 IRE) 0.04 0.1 Degrees VS = ±5 V, TA = 25°C; G = +2, RL = 150 Ω 5
Input Offset Voltage 3 9.8 mV VS = ±5 V, TA = 25°C 5
Input Bias Current 1.2 3.2 μA VS = ±5 V, TA = 25°C 5
Input Offset Current 0.2 0.6 μA VS = ±5 V, TA = 25°C 5
Open-Loop Gain 90 94 dB VS = ±5 V, TA = 25°C; RL = 1 kΩ 5
Common-Mode Rejection Ratio 66 74 dB VS = ±5 V, TA = 25°C; VCM = -5 V to +3.5 V 5
Quiescent Current (Per Amplifier) 6 7 mA VS = ±5 V, TA = 25°C 5
Power Supply Rejection Ratio 68 80 dB VS = ±5 V, TA = 25°C; VS- = −5 V to −6 V, or VS+ = 5 V to 6 V 5
Input Common-Mode Voltage Range -5.2 4 V VS = ±5 V, TA = 25°C 5
Operating Range (Supply Voltage) 3 12 V 3
Operating Temperature Range -40 85 °C 3
Supply Voltage 12.6 V 6
Internal Power Dissipation, 8-Lead SOIC_N (R) 0.9 W Device in free air 6
Differential Input Voltage -3.4 3.4 V 6
Storage Temperature Range (R) -65 125 °C 6
Lead Temperature 300 °C Soldering, 10 sec 6
Maximum Junction Temperature (plastic package) 150 °C Maximum safe junction temperature (glass transition of plastic) 6
Junction Temperature, extended period 175 °C Exceeding for an extended period can cause device failure 6
Thermal Resistance, Junction-to-Ambient (SOIC_N) θJA 155 °C/W Device in free air, 8-Lead SOIC_N 6

CAD (KiCad official)

  • Symbol: AD8042ARZ-REEL7
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: ad8042arz-reel7-etched.step / ad8042arz-reel7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad8042arz-reel7.step / ad8042arz-reel7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (16 pp, sha256 041ebd532aa3de92, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF