component
AD8034ARZ-REEL
Public Made by Adomby adom
Analog Devices FET Input Amplifiers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
AD8034ARZ-REEL
Analog Devices · FET Input Amplifiers · SOIC-8
AD8034ARZ-REEL from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT1 | output | Output of amplifier 1, which has rail-to-rail output swing for single-supply operation. |
| 2 | -IN1 | input | Inverting input of amplifier 1, a FET input with 1 pA typical input bias current. |
| 3 | +IN1 | input | Non-inverting input of amplifier 1, a FET input with 1 pA typical input bias current. |
| 4 | -VS | power_in | Negative supply pin; the part runs from a 5 V to 24 V supply and is fully operational on a single supply. |
| 5 | +IN2 | input | Non-inverting input of amplifier 2, a FET input with 1 pA typical input bias current. |
| 6 | -IN2 | input | Inverting input of amplifier 2, a FET input with 1 pA typical input bias current. |
| 7 | VOUT2 | output | Output of amplifier 2, which has rail-to-rail output swing and can deliver up to 40 mA of load current. |
| 8 | +VS | power_in | Positive supply pin; the supply range is 5 V to 24 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| -3 dB Bandwidth (G = +1, VOUT = 0.2 V p-p) | 65 | 80 | MHz | G = +1, VOUT = 0.2 V p-p | 3 | ||
| Slew Rate (25% to 75%) | 55 | 80 | V/μs | G = +2, VOUT = 4 V step | 3 | ||
| Input Offset Voltage | 1 | 2 | mV | VCM = 0 V | 3 | ||
| Input Offset Voltage (TMIN − TMAX) | 3.5 | mV | TMIN − TMAX | 3 | |||
| Input Offset Voltage Match | 2.5 | mV | 3 | ||||
| Input Offset Voltage Drift | 4 | 27 | μV/°C | 3 | |||
| Input Bias Current | 1.5 | 11 | pA | 3 | |||
| Input Bias Current (TMIN − TMAX) | 50 | pA | TMIN − TMAX | 3 | |||
| Open-Loop Gain | 89 | 92 | dB | VOUT = ± 3 V | 3 | ||
| FET Input Range (Input Common-Mode Voltage Range) | -5 | 2.2 | V | 3 | |||
| Common-Mode Rejection Ratio | -89 | -100 | dB | VCM = −3 V to +1.5 V | 3 | ||
| Output Voltage Swing | 4.75 | 4.95 | V | 3 | |||
| Operating Range (supply voltage) | 5 | 24 | V | 3 | |||
| Quiescent Current per Amplifier | 3.3 | 3.5 | mA | 3 | |||
| Power Supply Rejection Ratio | -90 | -100 | dB | VS = ±2 V | 3 | ||
| Supply Voltage | 26.4 | V | 6 | ||||
| Common-Mode Input Voltage | 26.4 | V | 6 | ||||
| Differential Input Voltage | 1.4 | V | 6 | ||||
| Storage Temperature Range | -65 | 125 | °C | 6 | |||
| Operating Temperature Range | -40 | 85 | °C | 6 | |||
| Lead Temperature (Soldering) | 300 | °C | 10 sec | 6 | |||
| Thermal Resistance, Junction-to-Ambient, 8-lead SOIC | θJA | 125 | °C/W | JEDEC standard 4-layer board, still air (approximate) | 6 | ||
| Junction Temperature (extended period) | TJ | 175 | °C | Extended period | 6 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | abs | absorption of the insulator material itself. Minimizing the amount | 18 |
CAD (KiCad official)
- Symbol:
AD8034ARZ-REEL - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ad8034arz-reel-etched.step/ad8034arz-reel-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad8034arz-reel.step/ad8034arz-reel.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
b6d8b59c94c85f9e, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AD8034ARZ-REEL
**Analog Devices** · FET Input Amplifiers · SOIC-8
AD8034ARZ-REEL from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT1 | output | Output of amplifier 1, which has rail-to-rail output swing for single-supply operation. |
| 2 | -IN1 | input | Inverting input of amplifier 1, a FET input with 1 pA typical input bias current. |
| 3 | +IN1 | input | Non-inverting input of amplifier 1, a FET input with 1 pA typical input bias current. |
| 4 | -VS | power_in | Negative supply pin; the part runs from a 5 V to 24 V supply and is fully operational on a single supply. |
| 5 | +IN2 | input | Non-inverting input of amplifier 2, a FET input with 1 pA typical input bias current. |
| 6 | -IN2 | input | Inverting input of amplifier 2, a FET input with 1 pA typical input bias current. |
| 7 | VOUT2 | output | Output of amplifier 2, which has rail-to-rail output swing and can deliver up to 40 mA of load current. |
| 8 | +VS | power_in | Positive supply pin; the supply range is 5 V to 24 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| -3 dB Bandwidth (G = +1, VOUT = 0.2 V p-p) | | 65 | 80 | | MHz | G = +1, VOUT = 0.2 V p-p | 3 |
| Slew Rate (25% to 75%) | | 55 | 80 | | V/μs | G = +2, VOUT = 4 V step | 3 |
| Input Offset Voltage | | | 1 | 2 | mV | VCM = 0 V | 3 |
| Input Offset Voltage (TMIN − TMAX) | | | | 3.5 | mV | TMIN − TMAX | 3 |
| Input Offset Voltage Match | | | | 2.5 | mV | | 3 |
| Input Offset Voltage Drift | | | 4 | 27 | μV/°C | | 3 |
| Input Bias Current | | | 1.5 | 11 | pA | | 3 |
| Input Bias Current (TMIN − TMAX) | | | | 50 | pA | TMIN − TMAX | 3 |
| Open-Loop Gain | | 89 | 92 | | dB | VOUT = ± 3 V | 3 |
| FET Input Range (Input Common-Mode Voltage Range) | | -5 | | 2.2 | V | | 3 |
| Common-Mode Rejection Ratio | | -89 | -100 | | dB | VCM = −3 V to +1.5 V | 3 |
| Output Voltage Swing | | 4.75 | 4.95 | | V | | 3 |
| Operating Range (supply voltage) | | 5 | | 24 | V | | 3 |
| Quiescent Current per Amplifier | | | 3.3 | 3.5 | mA | | 3 |
| Power Supply Rejection Ratio | | -90 | -100 | | dB | VS = ±2 V | 3 |
| Supply Voltage | | | | 26.4 | V | | 6 |
| Common-Mode Input Voltage | | | | 26.4 | V | | 6 |
| Differential Input Voltage | | | | 1.4 | V | | 6 |
| Storage Temperature Range | | -65 | | 125 | °C | | 6 |
| Operating Temperature Range | | -40 | | 85 | °C | | 6 |
| Lead Temperature (Soldering) | | | | 300 | °C | 10 sec | 6 |
| Thermal Resistance, Junction-to-Ambient, 8-lead SOIC | θJA | | 125 | | °C/W | JEDEC standard 4-layer board, still air (approximate) | 6 |
| Junction Temperature (extended period) | TJ | | | 175 | °C | Extended period | 6 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | abs | | absorption of the insulator material itself. Minimizing the amount | 18 |
## CAD (KiCad official)
- Symbol: `AD8034ARZ-REEL`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `ad8034arz-reel-etched.step` / `ad8034arz-reel-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ad8034arz-reel.step` / `ad8034arz-reel.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588931251818807296) (24 pp, sha256 `b6d8b59c94c85f9e`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ad8034arz-reel-datasheet.pdf)