main
Ray
Publish 0.1.0
bfd333d
AD7801BRZ
Analog Devices · Digital To Analog Converters (DACs) · SOIC-20-300mil
AD7801BRZ from Analog Devices, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | D7 | input | Parallel data input bit 7 (MSB); 8-bit data is loaded to the input register under the control of CS and WR. |
| 2 | D6 | input | Parallel data input bit 6; 8-bit data is loaded to the input register under the control of CS and WR. |
| 3 | D5 | input | Parallel data input bit 5; 8-bit data is loaded to the input register under the control of CS and WR. |
| 4 | D4 | input | Parallel data input bit 4; 8-bit data is loaded to the input register under the control of CS and WR. |
| 5 | D3 | input | Parallel data input bit 3; 8-bit data is loaded to the input register under the control of CS and WR. |
| 6 | D2 | input | Parallel data input bit 2; 8-bit data is loaded to the input register under the control of CS and WR. |
| 7 | D1 | input | Parallel data input bit 1; 8-bit data is loaded to the input register under the control of CS and WR. |
| 8 | D0 | input | Parallel data input bit 0 (LSB); 8-bit data is loaded to the input register under the control of CS and WR. |
| 9 | CS | input | Chip Select, active low logic input. |
| 10 | WR | input | Write input, active low logic input used in conjunction with CS to write data to the input register. |
| 11 | DGND | power_in | Digital ground. |
| 12 | PD | input | Active low input that puts the part into low power mode, reducing current consumption to less than 1 µA. |
| 13 | LDAC | input | Load DAC logic input; taking it low updates the DAC output with the DAC register contents, and if tied permanently low the DAC updates on the rising edge of WR. |
| 14 | CLR | input | Asynchronous clear input (active low); taking it low loads the DAC register with all zeroes and clears the DAC output to zero volts. |
| 15 | VDD | power_in | Power supply input, operates from +2.7 V to +5.5 V and should be decoupled to GND. |
| 16 | REFIN | input | External reference input with range 1 V to VDD/2; tying REFIN directly to VDD selects the internal VDD/2 reference. |
| 17 | AGND | power_in | Analog ground reference point and return point for all analog current on the part. |
| 18 | NC | unconnected | No connect pin. |
| 19 | VOUT | output | Analog output voltage from the DAC; the output amplifier can swing rail to rail. |
| 20 | DGND | power_in | Digital ground reference point and return point for all digital current on the part. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-20-300mil |
| Category | Data Converters |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Relative Accuracy | -1 | 1 | LSB | 2 | |||
| Differential Nonlinearity | -1 | 1 | LSB | Guaranteed Monotonic | 2 | ||
| Output Voltage Settling Time | 2 | µs | Typically 1.2 µs | 2 | |||
| Power Supply Rejection Ratio | 0.0003 | %/% | ∆VDD = ±10% | 2 | |||
| Input Current | -10 | 10 | µA | 2 | |||
| Input Low Voltage | VINL | 0.8 | V | VDD = +5 V | 2 | ||
| Input Low Voltage | VINL | 0.6 | V | VDD = +3 V | 2 | ||
| Input High Voltage | VINH | 2.4 | V | VDD = +5 V | 2 | ||
| Input High Voltage | VINH | 2.1 | V | VDD = +3 V | 2 | ||
| Pin Capacitance | 7 | pF | 2 | ||||
| Supply Voltage VDD | VDD | 2.7 | 5.5 | V | 2 | ||
| IDD Normal Mode @25°C | IDD | 1.55 | mA | VDD = 3.3 V, VIH = VDD and VIL = GND, DAC active excluding load current, @ 25°C | 2 | ||
| IDD Normal Mode TMIN to TMAX | IDD | 1.75 | mA | VDD = 3.3 V, VIH = VDD and VIL = GND, DAC active excluding load current, TMIN to TMAX | 2 | ||
| IDD Normal Mode @25°C | IDD | 2.35 | mA | VDD = 5.5 V, DAC active excluding load current, @ 25°C | 2 | ||
| IDD Normal Mode TMIN to TMAX | IDD | 2.5 | mA | VDD = 5.5 V, DAC active excluding load current, TMIN to TMAX | 2 | ||
| IDD Power-Down @25°C | IDD | 1 | µA | VIH = VDD and VIL = GND, @ 25°C | 2 | ||
| IDD Power-Down TMIN to TMAX | IDD | 2 | µA | VIH = VDD and VIL = GND, TMIN to TMAX | 2 | ||
| REFIN Input Range | 1 | V | Maximum is VDD/2 as printed | 2 | |||
| Output Voltage Range | VOUT | 0 | V | Maximum is VDD as printed | 2 | ||
| t1 Chip Select to Write Setup Time | t1 | 0 | ns | Chip Select to Write Setup Time, limit at TMIN, TMAX | 3 | ||
| t2 Chip Select to Write Hold Time | t2 | 0 | ns | Chip Select to Write Hold Time, limit at TMIN, TMAX | 3 | ||
| t3 Write Pulse Width | t3 | 20 | ns | Write Pulse Width, limit at TMIN, TMAX | 3 | ||
| t4 Data Setup Time | t4 | 15 | ns | Data Setup Time, limit at TMIN, TMAX | 3 | ||
| t5 Data Hold Time | t5 | 4.5 | ns | Data Hold Time, limit at TMIN, TMAX | 3 | ||
| t6 Write to LDAC Setup Time | t6 | 20 | ns | Write to LDAC Setup Time, limit at TMIN, TMAX | 3 | ||
| t7 LDAC Pulse Width | t7 | 20 | ns | LDAC Pulse Width, limit at TMIN, TMAX | 3 | ||
| t8 CLR Pulse Width | t8 | 20 | ns | CLR Pulse Width, limit at TMIN, TMAX | 3 | ||
| VDD to GND | VDD | -0.3 | 7 | V | VDD to GND | 3 | |
| Reference Input Voltage to AGND | -0.3 | V | Maximum is VDD + 0.3 V as printed | 3 | |||
| Digital Input Voltage to DGND | -0.3 | V | Maximum is VDD + 0.3 V as printed | 3 | |||
| AGND to DGND | -0.3 | 0.3 | V | AGND to DGND | 3 | ||
| VOUT to AGND | VOUT | -0.3 | V | Maximum is VDD + 0.3 V as printed | 3 | ||
| Operating Temperature Range (B Version) | -40 | 105 | °C | Commercial (B Version) | 3 | ||
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| Junction Temperature | 150 | °C | 3 | ||||
| SOIC Package Power Dissipation | 870 | mW | SOIC package | 3 | |||
| θJA Thermal Impedance (SOIC) | θJA | 74 | °C/W | SOIC package | 3 | ||
| Lead Temperature Soldering Vapor Phase | 215 | °C | Vapor phase (60 sec) | 3 | |||
| Lead Temperature Soldering Infrared | 220 | °C | Infrared (15 sec) | 3 |
CAD (KiCad official)
- Symbol:
AD7801BRZ - Footprint:
Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm - 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
- 3D model files:
ad7801brz-etched.step/ad7801brz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad7801brz.step/ad7801brz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
d49a593a61fdc9a3, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AD7801BRZ
**Analog Devices** · Digital To Analog Converters (DACs) · SOIC-20-300mil
AD7801BRZ from Analog Devices, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | D7 | input | Parallel data input bit 7 (MSB); 8-bit data is loaded to the input register under the control of CS and WR. |
| 2 | D6 | input | Parallel data input bit 6; 8-bit data is loaded to the input register under the control of CS and WR. |
| 3 | D5 | input | Parallel data input bit 5; 8-bit data is loaded to the input register under the control of CS and WR. |
| 4 | D4 | input | Parallel data input bit 4; 8-bit data is loaded to the input register under the control of CS and WR. |
| 5 | D3 | input | Parallel data input bit 3; 8-bit data is loaded to the input register under the control of CS and WR. |
| 6 | D2 | input | Parallel data input bit 2; 8-bit data is loaded to the input register under the control of CS and WR. |
| 7 | D1 | input | Parallel data input bit 1; 8-bit data is loaded to the input register under the control of CS and WR. |
| 8 | D0 | input | Parallel data input bit 0 (LSB); 8-bit data is loaded to the input register under the control of CS and WR. |
| 9 | CS | input | Chip Select, active low logic input. |
| 10 | WR | input | Write input, active low logic input used in conjunction with CS to write data to the input register. |
| 11 | DGND | power_in | Digital ground. |
| 12 | PD | input | Active low input that puts the part into low power mode, reducing current consumption to less than 1 µA. |
| 13 | LDAC | input | Load DAC logic input; taking it low updates the DAC output with the DAC register contents, and if tied permanently low the DAC updates on the rising edge of WR. |
| 14 | CLR | input | Asynchronous clear input (active low); taking it low loads the DAC register with all zeroes and clears the DAC output to zero volts. |
| 15 | VDD | power_in | Power supply input, operates from +2.7 V to +5.5 V and should be decoupled to GND. |
| 16 | REFIN | input | External reference input with range 1 V to VDD/2; tying REFIN directly to VDD selects the internal VDD/2 reference. |
| 17 | AGND | power_in | Analog ground reference point and return point for all analog current on the part. |
| 18 | NC | unconnected | No connect pin. |
| 19 | VOUT | output | Analog output voltage from the DAC; the output amplifier can swing rail to rail. |
| 20 | DGND | power_in | Digital ground reference point and return point for all digital current on the part. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-20-300mil |
| Category | Data Converters |
| Pins | 20 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Relative Accuracy | | -1 | | 1 | LSB | | 2 |
| Differential Nonlinearity | | -1 | | 1 | LSB | Guaranteed Monotonic | 2 |
| Output Voltage Settling Time | | | | 2 | µs | Typically 1.2 µs | 2 |
| Power Supply Rejection Ratio | | | | 0.0003 | %/% | ∆VDD = ±10% | 2 |
| Input Current | | -10 | | 10 | µA | | 2 |
| Input Low Voltage | VINL | | | 0.8 | V | VDD = +5 V | 2 |
| Input Low Voltage | VINL | | | 0.6 | V | VDD = +3 V | 2 |
| Input High Voltage | VINH | 2.4 | | | V | VDD = +5 V | 2 |
| Input High Voltage | VINH | 2.1 | | | V | VDD = +3 V | 2 |
| Pin Capacitance | | | | 7 | pF | | 2 |
| Supply Voltage VDD | VDD | 2.7 | | 5.5 | V | | 2 |
| IDD Normal Mode @25°C | IDD | | | 1.55 | mA | VDD = 3.3 V, VIH = VDD and VIL = GND, DAC active excluding load current, @ 25°C | 2 |
| IDD Normal Mode TMIN to TMAX | IDD | | | 1.75 | mA | VDD = 3.3 V, VIH = VDD and VIL = GND, DAC active excluding load current, TMIN to TMAX | 2 |
| IDD Normal Mode @25°C | IDD | | | 2.35 | mA | VDD = 5.5 V, DAC active excluding load current, @ 25°C | 2 |
| IDD Normal Mode TMIN to TMAX | IDD | | | 2.5 | mA | VDD = 5.5 V, DAC active excluding load current, TMIN to TMAX | 2 |
| IDD Power-Down @25°C | IDD | | | 1 | µA | VIH = VDD and VIL = GND, @ 25°C | 2 |
| IDD Power-Down TMIN to TMAX | IDD | | | 2 | µA | VIH = VDD and VIL = GND, TMIN to TMAX | 2 |
| REFIN Input Range | | 1 | | | V | Maximum is VDD/2 as printed | 2 |
| Output Voltage Range | VOUT | 0 | | | V | Maximum is VDD as printed | 2 |
| t1 Chip Select to Write Setup Time | t1 | 0 | | | ns | Chip Select to Write Setup Time, limit at TMIN, TMAX | 3 |
| t2 Chip Select to Write Hold Time | t2 | 0 | | | ns | Chip Select to Write Hold Time, limit at TMIN, TMAX | 3 |
| t3 Write Pulse Width | t3 | 20 | | | ns | Write Pulse Width, limit at TMIN, TMAX | 3 |
| t4 Data Setup Time | t4 | 15 | | | ns | Data Setup Time, limit at TMIN, TMAX | 3 |
| t5 Data Hold Time | t5 | 4.5 | | | ns | Data Hold Time, limit at TMIN, TMAX | 3 |
| t6 Write to LDAC Setup Time | t6 | 20 | | | ns | Write to LDAC Setup Time, limit at TMIN, TMAX | 3 |
| t7 LDAC Pulse Width | t7 | 20 | | | ns | LDAC Pulse Width, limit at TMIN, TMAX | 3 |
| t8 CLR Pulse Width | t8 | 20 | | | ns | CLR Pulse Width, limit at TMIN, TMAX | 3 |
| VDD to GND | VDD | -0.3 | | 7 | V | VDD to GND | 3 |
| Reference Input Voltage to AGND | | -0.3 | | | V | Maximum is VDD + 0.3 V as printed | 3 |
| Digital Input Voltage to DGND | | -0.3 | | | V | Maximum is VDD + 0.3 V as printed | 3 |
| AGND to DGND | | -0.3 | | 0.3 | V | AGND to DGND | 3 |
| VOUT to AGND | VOUT | -0.3 | | | V | Maximum is VDD + 0.3 V as printed | 3 |
| Operating Temperature Range (B Version) | | -40 | | 105 | °C | Commercial (B Version) | 3 |
| Storage Temperature Range | | -65 | | 150 | °C | | 3 |
| Junction Temperature | | | | 150 | °C | | 3 |
| SOIC Package Power Dissipation | | | | 870 | mW | SOIC package | 3 |
| θJA Thermal Impedance (SOIC) | θJA | | 74 | | °C/W | SOIC package | 3 |
| Lead Temperature Soldering Vapor Phase | | | | 215 | °C | Vapor phase (60 sec) | 3 |
| Lead Temperature Soldering Infrared | | | | 220 | °C | Infrared (15 sec) | 3 |
## CAD (KiCad official)
- Symbol: `AD7801BRZ`
- Footprint: `Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm`
- 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
- 3D model files: `ad7801brz-etched.step` / `ad7801brz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ad7801brz.step` / `ad7801brz.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/AD7801.pdf) (16 pp, sha256 `d49a593a61fdc9a3`, retrieved 2026-11-10, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ad7801brz-datasheet.pdf)