# AD7414ARTZ-1REEL7

**Analog Devices** · Temperature Sensors · SOT-23-6

AD7414ARTZ-1REEL7 from Analog Devices, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AS | input | Logic input address select that selects one of three I2C addresses (float, GND or VDD, see Table 4); a 1 kΩ pull-up or pull-down resistor is recommended. |
| 2 | GND | power_in | Analog and digital ground. |
| 3 | VDD | power_in | Positive supply voltage, 2.7 V to 5.5 V. |
| 4 | SCL | input | Digital input for the serial bus clock. |
| 5 | ALERT | output | Open-drain digital output overtemperature indicator that becomes active when temperature exceeds THIGH. |
| 6 | SDA | bidirectional | Digital I/O serial bus bidirectional data line with open-drain output. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-23-6 |
| Category | Sensors |
| Pins | 6 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Accuracy typ @ +40°C |  |  | 0.5 |  | °C | VDD = 3 V @ +40°C (±0.5 typ) | 3 |
| Accuracy -40 to +70°C |  | -1.5 |  | 1.5 | °C | VDD = 3 V @ −40°C to +70°C | 3 |
| Accuracy -40 to +85°C |  | -2 |  | 2 | °C | VDD = 3 V @ −40°C to +85°C | 3 |
| Accuracy -40 to +125°C |  | -3 |  | 3 | °C | VDD = 3 V @ −40°C to +125°C | 3 |
| Accuracy typ -40 to +125°C |  |  | 2 |  | °C | VDD = 3 V @ −40°C to +125°C (±2.0 typ) | 3 |
| Accuracy -40 to +85°C, 5.5 V |  | -3 |  | 3 | °C | VDD = 5.5 V @ −40°C to +85°C | 3 |
| Accuracy typ -40 to +85°C, 5.5 V |  |  | 2 |  | °C | VDD = 5.5 V @ −40°C to +85°C (±2.0 typ) | 3 |
| Accuracy typ -40 to +125°C, 5.5 V |  |  | 3 |  | °C | VDD = 5.5 V @ −40°C to +125°C (±3.0 typ) | 3 |
| Resolution |  |  | 10 |  | Bits |  | 3 |
| Update Rate | tR |  | 800 |  | ms |  | 3 |
| Temperature Conversion Time |  |  | 25 |  | µs |  | 3 |
| Peak Supply Current |  |  | 1.1 |  | mA | Current during conversion | 3 |
| Supply Current, Nonconverting |  |  |  | 900 | µA | Peak current between conversions | 3 |
| Normal Mode inactive serial bus @ 3 V |  |  | 169 |  | µA | Serial bus inactive, not converting, D7 of configuration register = 0 | 3 |
| Normal Mode inactive serial bus @ 5 V |  |  | 188 |  | µA | Serial bus inactive, not converting, D7 of configuration register = 0 | 3 |
| Normal Mode active serial bus @ 3 V |  |  | 180 |  | µA | Serial bus active, not converting, D7 of configuration register = 0 | 3 |
| Normal Mode active serial bus @ 5 V |  |  | 214 |  | µA | Serial bus active, not converting, D7 of configuration register = 0 | 3 |
| Shutdown Mode current |  |  |  | 3 | µA |  | 3 |
| Input High Voltage | VIH | 2.4 |  |  | V |  | 3 |
| Input Low Voltage | VIL |  |  | 0.8 | V |  | 3 |
| Input Current | IIN | -1 |  | 1 | µA | VIN = 0 V to VDD | 3 |
| Input Capacitance | CIN |  |  | 10 | pF | All digital inputs | 3 |
| Output High Voltage | VOH | 2.4 |  |  | V |  | 3 |
| Output Low Voltage | VOL |  |  | 0.4 | V | IOL = 1.6 mA | 3 |
| Output High Current | IOH |  |  | 1 | µA | VOH = 5 V | 3 |
| Output Capacitance | COUT |  |  | 10 | pF | Typ = 3 pF | 3 |
| ALERT Output Saturation Voltage |  |  |  | 0.8 | V | IOUT = 4 mA | 3 |
| Serial Clock Period | t1 | 2.5 |  |  | µs | See Figure 2 | 3 |
| Data In Setup Time to SCL High | t2 | 50 |  |  | ns | See Figure 2 | 3 |
| Data Out Stable after SCL Low | t3 | 0 |  |  | ns | See Figure 2 | 3 |
| SDA Low Setup Time to SCL Low (Start Condition) | t4 | 50 |  |  | ns | See Figure 2 | 3 |
| SDA High Hold Time after SCL High (Stop Condition) | t5 | 50 |  |  | ns | See Figure 2 | 3 |
| SDA and SCL Fall Time | t6 |  |  | 90 | ns | See Figure 2 | 3 |
| Data Hold Time | t7 | 35 |  |  | ns | See Figure 2 | 3 |
| Power-Up Time |  |  | 4 |  | µs |  | 3 |
| Supply voltage range | VDD | 2.7 |  | 5.5 | V |  | 3 |
| Operating temperature range (A version) |  | -40 |  | 125 | °C | A version | 3 |
| VDD to GND | VDD | -0.3 |  | 7 | V |  | 5 |
| SDA Input Voltage to GND |  | -0.3 |  | 7 | V |  | 5 |
| SDA Output Voltage to GND |  | -0.3 |  | 7 | V |  | 5 |
| SCL Input Voltage to GND |  | -0.3 |  | 7 | V |  | 5 |
| ALERT Output Voltage to GND |  | -0.3 |  | 7 | V |  | 5 |
| Operating Temperature Range |  | -40 |  | 125 | °C |  | 5 |
| Storage Temperature Range |  | -65 |  | 150 | °C |  | 5 |
| Junction Temperature |  |  |  | 150 | °C |  | 5 |
| IR Reflow Peak Temperature (Pb-Free) |  |  |  | 260 | °C | 260°C (0°C), time at peak 20 sec to 40 sec | 5 |
| Thermal Impedance θJA, 6-Lead SOT-23 (RJ-6) | θJA |  | 190.4 |  | °C/W | Junction-to-Ambient (still air) | 5 |

## CAD (KiCad official)

- Symbol: `AD7414ARTZ-1REEL7`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `ad7414artz-1reel7-etched.step` / `ad7414artz-1reel7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ad7414artz-1reel7.step` / `ad7414artz-1reel7.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/AD7414_7415.pdf) (17 pp, sha256 `af91f85b0142e997`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/ad7414artz-1reel7-datasheet.pdf)