component
AD734ANZ
Public Made by Adomby adom
Analog Devices Linear - Analog Multipliers, Dividers, PDIP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAD734ANZ
Analog Devices · Linear - Analog Multipliers, Dividers · PDIP-14
AD734ANZ from Analog Devices, in a PDIP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | X1 | input | X differential multiplicand input, with an operating range of ±12.5 V differential or common mode. |
| 2 | X2 | input | X differential multiplicand input, with an operating range of ±12.5 V differential or common mode. |
| 3 | U0 | passive | Denominator current source enable interface; the datasheet gives no electrical limits for this pin in the pages provided. |
| 4 | U1 | passive | Denominator interface; the datasheet refers to the Functional Description section for its use, which is not in the pages provided. |
| 5 | U2 | passive | Denominator interface; the datasheet refers to the Functional Description section for its use, which is not in the pages provided. |
| 6 | Y1 | input | Y differential multiplicand input, with an operating range of ±12.5 V differential or common mode. |
| 7 | Y2 | input | Y differential multiplicand input, with an operating range of ±12.5 V differential or common mode. |
| 8 | VN | power_in | Negative supply; the datasheet specifies −VS = VN = −15 V for characterization, with supply ratings of ±18 V absolute maximum. |
| 9 | ER | passive | Reference voltage pin; the datasheet does not state its electrical limits in the pages provided. |
| 10 | Z2 | input | Z differential summing input, with an operating range of ±12.5 V differential or common mode. |
| 11 | Z1 | input | Z differential summing input, with an operating range of ±12.5 V differential or common mode. |
| 12 | W | output | Multiplier/divider output, with the transfer function W = XY/U and a low impedance voltage output. |
| 13 | DD | input | Denominator disable pin; the datasheet gives no electrical limits for this pin in the pages provided. |
| 14 | VP | power_in | Positive supply; the datasheet specifies +VS = VP = +15 V for characterization, with supply ratings of ±18 V absolute maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | PDIP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Total Static Error | 0.1 | 0.4 | % | −10 V ≤ X, Y ≤ 10 V | 3 | ||
| Total Static Error over TMIN to TMAX | 1 | % | TMIN to TMAX | 3 | |||
| Total Static Error vs. Temperature | 0.004 | %/°C | TMIN to TMAX | 3 | |||
| Total Static Error vs. Either Supply | 0.01 | 0.05 | %/V | ±VS = 14 V to 16 V | 3 | ||
| Peak Nonlinearity (X) | 0.05 | % | −10 V ≤ X ≤ +10 V, Y = +10 V | 3 | |||
| Peak Nonlinearity (Y) | 0.025 | % | −10 V ≤ Y ≤ +10 V, X = +10 V | 3 | |||
| THD (X input) | -58 | dBc | X = 7 V rms, Y = +10 V, f ≤ 5 kHz | 3 | |||
| THD (X input) over TMIN to TMAX | -55 | dBc | TMIN to TMAX | 3 | |||
| THD (Y input) | -60 | dBc | Y = 7 V rms, X = +10 V, f ≤ 5 kHz | 3 | |||
| THD (Y input) over TMIN to TMAX | -57 | dBc | TMIN to TMAX | 3 | |||
| Feedthrough (X input) | -85 | -60 | dBc | X = 7 V rms, Y nulled, f ≤ 5 kHz | 3 | ||
| Feedthrough (Y input) | -85 | -66 | dBc | Y = 7 V rms, X nulled, f ≤ 5 kHz | 3 | ||
| Noise Spectral Density (RTO) | 1 | μV/√Hz | X = Y = 0 V, 100 Hz to 1 MHz | 3 | |||
| Total Output Noise | -94 | -88 | dBc | 10 Hz to 20 kHz | 3 | ||
| Total Output Noise over TMIN to TMAX | -85 | dBc | TMIN to TMAX | 3 | |||
| Gain Error | 1 | % | Y = 10 V, U = 100 mV to 10 V | 3 | |||
| U Input Scaling Error | 0.3 | % | See Figure 28 test circuit | 3 | |||
| U Input Scaling Error over TMIN to TMAX | 0.8 | % | TMIN to TMAX | 3 | |||
| Output to 1% | 100 | ns | U = 1 V to 10 V step, X = 1 V | 3 | |||
| X Input Offset Voltage | 15 | mV | 3 | ||||
| X Input Offset Voltage over TMIN to TMAX | 25 | mV | TMIN to TMAX | 3 | |||
| Y Input Offset Voltage | 10 | mV | 3 | ||||
| Y Input Offset Voltage over TMIN to TMAX | 12 | mV | TMIN to TMAX | 3 | |||
| Z Input Offset Voltage | 20 | mV | 3 | ||||
| Z Input Offset Voltage over TMIN to TMAX | 50 | mV | TMIN to TMAX | 3 | |||
| Z Input PSRR (either supply) | 54 | 70 | dB | f ≤ 1 kHz | 3 | ||
| Z Input PSRR (either supply) over TMIN to TMAX | 50 | dB | TMIN to TMAX | 3 | |||
| CMRR | 70 | 85 | dB | f = 5 kHz | 4 | ||
| Input Bias Current (X, Y, Z inputs) | 50 | 300 | nA | 4 | |||
| Input Bias Current (X, Y, Z inputs) over TMIN to TMAX | 400 | nA | TMIN to TMAX | 4 | |||
| Input Operating Range (X, Y, Z) | -12.5 | 12.5 | V | Differential or common mode | 3 | ||
| Output Voltage Swing | -12 | 12 | V | TMIN to TMAX | 4 | ||
| Dynamic Response 3 dB Bandwidth (W) | 8 | 10 | MHz | W ≤ 7 V rms, CLOAD ≤ 20 pF | 4 | ||
| Settling Time to 1% | 125 | ns | +20 V or −20 V output step | 4 | |||
| Settling Time to 0.1% | 200 | ns | +20 V or −20 V output step | 4 | |||
| Short-Circuit Current | 20 | 50 | 80 | mA | TMIN to TMAX | 4 | |
| Operating Supply Range (±VS) | 8 | 16.5 | V | ±VS (each supply) | 4 | ||
| Quiescent Current | 6 | 9 | 12 | mA | TMIN to TMAX | 4 | |
| Supply Voltage | -18 | 18 | V | 5 | |||
| Internal Power Dissipation | 500 | mW | TJ max = 175°C | 5 | |||
| Storage Temperature Range (N-14) | -65 | 150 | °C | N-14 package | 5 | ||
| Operating Temperature Range (AD734A, Industrial) | -40 | 85 | °C | AD734A, AD734B (Industrial) | 5 | ||
| Lead Temperature Range (Soldering) | 300 | °C | Soldering, 60 sec | 5 | |||
| ESD Rating | 500 | V | 5 | ||||
| Thermal Resistance, Junction-to-Ambient (14-Lead PDIP, N-14) | θJA | 150 | °C/W | Worst case, device soldered in circuit board | 5 |
CAD (KiCad official)
- Symbol:
AD734ANZ - Footprint:
Package_DIP:DIP-14_W7.62mm - 3D model: PDIP-14 (KiCad packages3D, STEP)
- 3D model files:
ad734anz-etched.step/ad734anz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad734anz.step/ad734anz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
08e0470e855c35ad, retrieved 2026-10-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).