main
History Download
Ray Publish 0.1.3 fa98afa

AD7306ARZ

Analog Devices · Multi-protocol Transceivers · SOIC-24-300mil

AD7306ARZ from Analog Devices, in a SOIC-24-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 V+ power_out Internally generated positive supply (+9 V nominal); a 0.1 µF capacitor must be connected between this pin and GND.
2 C1+ passive External capacitor 1 terminal; a 0.1 µF capacitor must be connected between C1+ and C1-.
3 C1- passive External capacitor 1 terminal; a 0.1 µF capacitor must be connected between C1- and C1+.
4 R2IN input RS-232 receiver R2 input, which accepts RS-232 input voltages (±15 V input range per the RS-232 receiver specification).
5 T1OUT output RS-232 transmitter (driver) T1 output, typically ±7.5 V.
6 T2OUT output RS-232 transmitter (driver) T2 output, typically ±7.5 V.
7 VCC power_in Power supply input, 5 V ±5%.
8 R1IN (B) input RS-422 receiver R1 differential input B.
9 R1IN/R1IN (A) input Receiver R1 input that may be configured for single-ended RS-232 levels or differential RS-422 levels using the 232/422 SEL pin.
10 T3OUT (B) output RS-422 transmitter (driver) T3 differential output B.
11 T3OUT (A) output RS-422 transmitter (driver) T3 differential output A.
12 NC unconnected No connect pin.
13 NC unconnected No connect pin.
14 GND power_in Ground pin; must be connected to 0 V.
15 232/422 SEL input Select input that configures receiver R1 for RS-232 (logic 1) or RS-422 (logic 0) signal levels.
16 T3IN input TTL/CMOS input to the RS-422 transmitter T3.
17 R1OUT output TTL/CMOS output from receiver R1.
18 GND power_in Ground pin; must be connected to 0 V.
19 T2IN input TTL/CMOS input to RS-232 transmitter T2.
20 T1IN input TTL/CMOS input to RS-232 transmitter T1.
21 R2OUT output TTL/CMOS output from receiver R2.
22 C2+ passive External capacitor 2 terminal; a 0.1 µF capacitor must be connected between C2+ and C2-.
23 C2- passive External capacitor 2 terminal; a 0.1 µF capacitor must be connected between C2- and C2+.
24 V- power_out Internally generated negative supply (-9 V nominal); a 0.1 µF capacitor must be connected between this pin and GND.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOIC-24-300mil
Category Communication Interface Chip/UART/485/232
Pins 24

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
TTL Input Logic Low (RS-232 driver) VINL 0.8 V 2
TTL Input Logic High (RS-232 driver) VINH 2 V 2
Input Logic Current (RS-232 driver) -10 0.1 10 µA VIN = 0 V to VCC 2
RS-232 High Level Output Voltage 5 7.3 V RL = 3 kΩ 2
RS-232 Low Level Output Voltage -5 -6.5 V RL = 3 kΩ 2
Output Short Circuit Current (RS-232 driver) -5 12 5 mA VOUT = 0 V, TA = 0°C to +70°C 2
Slew Rate 8 20 30 V/µs CL = 50 pF, RL = 3 kΩ 2
Slew Rate 4 V/µs CL = 2500 pF, RL = 3 kΩ 2
Output Resistance (Powered Down) 300 Ω VCC = 0 V, VOUT = ±3 V 2
Output Resistance (Powered Down) 10 MΩ VCC = 0 V, VOUT = ±3 V 2
RS-232 Input Voltage Range -15 15 V 2
RS-232 Input Threshold Low 0.8 1.3 V 2
RS-232 Input Threshold High 1.7 2.4 V 2
RS-232 Input Hysteresis 0.1 0.4 1 V 2
RS-232 Input Resistance 3 5 7 kΩ 2
TTL Output Voltage Low (RS-232 receiver) VOL 0.2 0.4 V IOUT = +4 mA 2
TTL Output Voltage High (RS-232 receiver) VOH 3.5 4.8 V IOUT = -4 mA 2
TTL Input Logic Low (RS-422 driver) VINL 0.8 V 2
TTL Input Logic High (RS-422 driver) VINH 2 V 2
Logic Input Current (RS-422 driver) -10 0.1 10 µA VIN = 0 V to VCC 2
Differential Output Voltage 2 V RL Diff = 100 Ω; Figure 3 2
Common-Mode Output Voltage 3 V 2
∆/VOUT/ for Complementary O/P States 0.2 V RL Diff = 100 Ω 2
Output Short Circuit Current (RS-422 driver) 35 150 mA 0 V ≤ VCMR ≤ +7 V 2
Common-Mode Voltage Range (RS-422 receiver) -7 7 V Typical RS-422 Input Voltage <5 V 2
Differential Input Threshold Voltage -0.2 0.2 V 2
Input Voltage Hysteresis (RS-422 receiver) 70 mV VCM = 0 V 2
Input Resistance (RS-422 receiver) 3 5 7 kΩ 2
TTL Output Voltage Low (RS-422 receiver) VOL 0.2 0.4 V IOUT = +4.0 mA 2
TTL Output Voltage High (RS-422 receiver) VOH 3.5 4.8 V IOUT = -4.0 mA 2
Input Logic Low (232/422 SEL) VINL 0.8 V 2
Input Logic High (232/422 SEL) VINH 2 V 2
Logic Input Current (232/422 SEL) -10 0.1 10 µA VIN = 0 V to VCC 2
Power Supply Current ICC 10 15 mA Outputs Unloaded 2
V+ Output Voltage (charge pump) V+ 9 V RS-232 Output Unloaded 2
V- Output Voltage (charge pump) V- -9 V RS-232 Outputs Unloaded 2
Generator Rise Time 200 µs 2
Propagation Delay Input to Output (RS-422 driver) TPLH, TPHL 35 100 ns RL Diff = 100 Ω. CL1 = CL2 = 100 pF, Figures 2 & 4 3
RS-422 O/P to O/P Skew TSKEW 2 10 ns RL Diff = 100 Ω. CL1 = CL2 = 100 pF, Figures 2 & 4 3
Driver Rise/Fall Time TR, TF 15 40 ns RL Diff = 100 Ω. CL1 = CL2 = 100 pF, Figures 2 & 4 3
Propagation Delay Input to Output (RS-422 receiver) TPLH, TPHL 70 200 ns CL = 15 pF. Figure 5 3
RS-232 Disable to RS-422 Enable TEN1 70 200 ns Figure 6 3
RS-422 Disable to RS-232 Enable TEN2 70 200 ns Figure 6 3
Transmission Rate (RS-422) 5 MHz 3
Transmission Rate (RS-232) 100 kHz CL = 50 pF 3
Transmission Rate (RS-232) 20 kHz CL = 2.5 nF 3
VCC supply voltage VCC 7 V 3
V+ (positive charge pump output) V+ 13.2 V 3
V- (negative charge pump output) V- -13.2 0.3 V 3
T3IN input voltage T3IN -0.3 V 3
R1IN A/B, R2IN input voltage R1IN, R2IN -25 25 V 3
232/422 SEL input voltage 232/422 SEL -0.3 V 3
T1OUT, T2OUT output voltage T1OUT, T2OUT -15 15 V 3
T3OUT(A), T3OUT(B) output voltage T3OUT -0.3 7 V 3
R1OUT, R2OUT output voltage R1OUT, R2OUT -0.3 V 3
Power Dissipation (Small Outline) 650 mW 3
Storage Temperature Range -65 150 °C 3
Lead Temperature (Soldering, 10 s) 300 °C 10 secs 3
Operating Temperature Range (Industrial, A Version) -40 85 °C A Version (AD7306ARZ) 3
Supply Voltage VCC VCC 5 V 5 V ±5%; C1 = C2 = C3 = C4 = 0.1 µF 2

CAD (KiCad official)

  • Symbol: AD7306ARZ
  • Footprint: Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm
  • 3D model: SOIC-24-300mil (KiCad packages3D, STEP)
  • 3D model files: ad7306arz-etched.step / ad7306arz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad7306arz.step / ad7306arz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (10 pp, sha256 9e94e5ba3bba2b74, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF