Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

AD7265BSUZ

Analog Devices · Analog To Digital Converters (ADCs) · TQFP-32(7x7)

AD7265BSUZ from Analog Devices, in a TQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DGND power_in Digital ground reference for all digital circuitry; should be within 0.3 V of AGND even on a transient basis.
2 REF SELECT input Logic input; tied to DGND selects the on-chip 2.5 V reference for both ADCs, tied logic high allows an external reference via DCAPA/DCAPB.
3 AVDD power_in Analog supply voltage, 2.7 V to 5.25 V, within 0.3 V of DVDD, decoupled to AGND.
4 DCAPA bidirectional Decoupling capacitor pin (470 nF recommended) for ADC A reference buffer; external reference can be applied here or buffered on-chip reference taken from it.
5 AGND power_in Analog ground reference for all analog circuitry, inputs and external reference; connect to the AGND plane.
6 AGND power_in Analog ground reference for all analog circuitry, inputs and external reference; connect to the AGND plane.
7 VA1 input Analog input 1 of ADC A, programmable as single-ended or part of a true differential pair.
8 VA2 input Analog input 2 of ADC A, programmable as single-ended or part of a true differential pair.
9 VA3 input Analog input 3 of ADC A, programmable as single-ended or part of a true differential pair.
10 VA4 input Analog input 4 of ADC A, programmable as single-ended or part of a true differential pair.
11 VA5 input Analog input 5 of ADC A, programmable as single-ended or part of a true differential pair.
12 VA6 input Analog input 6 of ADC A, programmable as single-ended or part of a true differential pair.
13 VB6 input Analog input 6 of ADC B, programmable as single-ended or part of a true differential pair.
14 VB5 input Analog input 5 of ADC B, programmable as single-ended or part of a true differential pair.
15 VB4 input Analog input 4 of ADC B, programmable as single-ended or part of a true differential pair.
16 VB3 input Analog input 3 of ADC B, programmable as single-ended or part of a true differential pair.
17 VB2 input Analog input 2 of ADC B, programmable as single-ended or part of a true differential pair.
18 VB1 input Analog input 1 of ADC B, programmable as single-ended or part of a true differential pair.
19 AGND power_in Analog ground reference for all analog circuitry, inputs and external reference; connect to the AGND plane.
20 DCAPB bidirectional Decoupling capacitor pin (470 nF recommended) for ADC B reference buffer; external reference can be applied here or buffered on-chip reference taken from it.
21 RANGE input Logic input; low selects 0 V to VREF analog input range, high when CS goes low selects 2 × VREF.
22 SGL/DIFF input Logic input; low selects differential operation, high selects single-ended operation.
23 A2 input Multiplexer select logic input (MSB), set up before acquisition and the falling edge of CS to choose the channel pair converted.
24 A1 input Multiplexer select logic input, set up before acquisition and the falling edge of CS to choose the channel pair converted.
25 A0 input Multiplexer select logic input, set up before acquisition and the falling edge of CS to choose the channel pair converted.
26 CS input Active-low chip select that initiates conversions and frames the serial data transfer.
27 SCLK input Serial clock input for accessing data and the clock source for the conversion process.
28 DOUTB output Serial data output, MSB first with two leading zeros then 12 data bits, clocked out on falling SCLK edge; 14 SCLKs needed to read data.
29 DGND power_in Digital ground reference for all digital circuitry; should be within 0.3 V of AGND even on a transient basis.
30 DOUTA output Serial data output, MSB first with two leading zeros then 12 data bits, clocked out on falling SCLK edge; 14 SCLKs needed to read data.
31 VDRIVE power_in Logic power supply input setting the interface voltage, decoupled to DGND, never more than 0.3 V above AVDD or DVDD.
32 DVDD power_in Digital supply voltage, 2.7 V to 5.25 V, within 0.3 V of AVDD, decoupled to DGND.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TQFP-32(7x7)
Category Data Converters
Pins 32

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
SNR differential mode SNR 71 dB fIN = 50 kHz sine wave; differential mode 3
SNR single-ended/pseudo differential SNR 69 dB fIN = 50 kHz sine wave; single-ended and pseudo differential modes 3
SINAD differential mode SINAD 70 dB fIN = 50 kHz sine wave; differential mode 3
SINAD single-ended/pseudo differential SINAD 68 dB fIN = 50 kHz sine wave; single-ended and pseudo differential modes 3
THD differential mode THD -77 dB fIN = 50 kHz sine wave; differential mode 3
THD single-ended/pseudo differential THD -73 dB fIN = 50 kHz sine wave; single-ended and pseudo differential modes 3
Spurious-Free Dynamic Range SFDR -75 dB fIN = 50 kHz sine wave 3
Aperture Delay 11 ns 3
Aperture Delay Matching 200 ps 3
Integral Nonlinearity, differential INL -1 0.5 1 LSB ±0.5 LSB typ; differential mode 3
Integral Nonlinearity, single-ended/pseudo differential INL -1.5 0.5 1.5 LSB ±0.5 LSB typ; single-ended and pseudo differential modes 3
Differential Nonlinearity, differential DNL -0.99 0.99 LSB Differential mode 3
Differential Nonlinearity, single-ended/pseudo differential DNL -0.99 1.5 LSB Single-ended and pseudo differential modes 3
Offset Error -6 6 LSB Straight binary output coding 3
Gain Error -2.5 2.5 LSB Straight binary output coding 3
Positive Gain Error -2 2 LSB Twos complement output coding 3
Zero Code Error -5 5 LSB Twos complement output coding 3
Negative Gain Error -2 2 LSB Twos complement output coding 3
Analog Input DC Leakage Current -1 1 µA 4
Reference Output Voltage tolerance -0.2 0.2 % 2.5 V reference; ±0.2% max at 25°C 4
Reference Input Voltage Range 0.1 V Max printed as VDD; see Typical Performance Characteristics section 4
Reference Input DC Leakage Current -2 2 µA External reference applied to Pin DCAPA/Pin DCAPB 4
Reference Temperature Coefficient 10 20 ppm/°C 4
Input High Voltage VINH 2.8 V 4
Input Low Voltage VINL 0.4 V 4
Output Low Voltage VOL 0.4 V 4
Floating State Leakage Current -1 1 µA 4
Track-and-Hold Acquisition Time, 5 V 90 ns Full-scale step input; VDD = 5 V 4
Track-and-Hold Acquisition Time, 3 V 110 ns Full-scale step input; VDD = 3 V 4
Throughput Rate 1 MSPS 4
Supply Voltage VDD 2.7 5.25 V 4
Logic Supply Voltage VDRIVE 2.7 5.25 V 4
IDD Normal Mode (Static) IDD 2.3 mA VDD = 5.25 V 4
IDD Operational, fS = 1 MSPS, 5.25 V IDD 3.5 4 mA VDD = 5.25 V; 3.5 mA typ 4
IDD Operational, fS = 1 MSPS, 3.6 V IDD 2.7 3.2 mA VDD = 3.6 V; 2.7 mA typ 4
IDD Partial Power-Down Mode IDD 500 µA Static 4
IDD Full Power-Down Mode, up to 85°C IDD 1 µA TA = −40°C to +85°C 4
IDD Full Power-Down Mode, above 85°C IDD 2.8 µA TA > 85°C to 125°C 4
Power Dissipation Normal Mode 21 mW VDD = 5.25 V 4
Power Dissipation Partial Power-Down 2.625 mW VDD = 5.25 V 4
Power Dissipation Full Power-Down 5.25 µW VDD = 5.25 V, TA = −40°C to +85°C 4
SCLK frequency, TA up to 85°C fSCLK 1 16 MHz TA = −40°C to +85°C 5
SCLK frequency, TA above 85°C fSCLK 4 16 MHz TA > 85°C to 125°C 5
Conversion time tCONVERT 875 ns fSCLK = 16 MHz 5
Quiet time tQUIET 30 ns Minimum time between end of serial read and next falling edge of CS 5
CS to DOUT three-state disabled delay t3 15 ns Delay from CS until DOUTA and DOUTB are three-state disabled 5
Data access time, VDD = 3 V t4 36 ns Data access time after SCLK falling edge, VDD = 3 V 5
Data access time, VDD = 5 V t4 27 ns Data access time after SCLK falling edge, VDD = 5 V 5
CS rising edge to falling edge pulse width t9 30 ns 5
VDD to AGND VDD -0.3 7 V 6
DVDD to DGND DVDD -0.3 7 V 6
Digital Input Voltage to DGND -0.3 7 V 6
Input Current to Any Pin Except Supplies -10 10 mA Transient currents of up to 100 mA do not cause SCR latch up 6
Operating Temperature Range -40 125 °C 6
Storage Temperature Range -65 150 °C 6
Junction Temperature 150 °C 6
Reflow Temperature 255 °C 10 sec to 30 sec 6
ESD 1.5 kV 6
Thermal Impedance θJA (TQFP) θJA 55 °C/W TQFP 6

CAD (KiCad official)

  • Symbol: AD7265BSUZ
  • Footprint: Package_QFP:TQFP-32_7x7mm_P0.8mm
  • 3D model: TQFP-32(7x7) (KiCad packages3D, STEP)
  • 3D model files: ad7265bsuz-etched.step / ad7265bsuz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad7265bsuz.step / ad7265bsuz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (27 pp, sha256 857cb1677ea06db5, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF