main
Ray
Publish 0.1.0
285f761
AD7249ARZ
Analog Devices · Digital To Analog Converters (DACs) · SOIC-16-300mil
AD7249ARZ from Analog Devices, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REFOUT | output | Internal 5 V analog voltage reference output; connect REFOUT to REFIN to operate from the internal reference. |
| 2 | REFIN | input | Voltage reference input, internally buffered before being applied to both DACs; nominal reference for specified operation is 5 V. |
| 3 | ROFSB | passive | Output offset resistor for the DAC B amplifier; connect to VOUTB for the +5 V range, to AGND for the +10 V range, and to REFIN for the -5 V to +5 V range. |
| 4 | VOUTB | output | Analog buffer amplifier output of DAC B, selectable as 0 V to +5 V, 0 V to +10 V, or -5 V to +5 V. |
| 5 | AGND | power_in | Analog ground reference for all analog circuitry. |
| 6 | CLR | input | Clear logic input; taking it low clears both DACs to 0 V in the unipolar and twos complement ranges, or to -REFIN in the offset binary bipolar range. |
| 7 | BIN/COMP | input | Data format select: logic 0 selects natural binary in unipolar ranges and offset binary in the bipolar range, logic 1 selects twos complement in the bipolar range. |
| 8 | DGND | power_in | Digital ground reference for all digital circuitry. |
| 9 | SDIN | input | Serial data input; the 16-bit serial data word is applied to this pin and clocked into the input register on each falling SCLK edge. |
| 10 | LDAC | input | Load DAC logic input that updates both DAC outputs on its falling edge; if held permanently low, both DACs update on the 16th falling SCLK pulse (automatic update mode). |
| 11 | SCLK | input | Serial clock logic input; data is clocked into the input register on each falling SCLK edge. |
| 12 | SYNC | input | Data synchronization logic input; taking it low initializes the internal logic in readiness for a new data word. |
| 13 | VDD | power_in | Positive power supply, operated from +12 V to +15 V; absolute maximum is +17 V to AGND/DGND. |
| 14 | VOUTA | output | Analog buffer amplifier output of DAC A, selectable as 0 V to +5 V, 0 V to +10 V, or -5 V to +5 V. |
| 15 | VSS | power_in | Negative power supply for the output amplifiers only; connect to 0 V for single supply operation or -12 V to -15 V for dual supply operation. |
| 16 | ROFSA | passive | Output offset resistor for the DAC A amplifier; connect to VOUTA for the +5 V range, to AGND for the +10 V range, and to REFIN for the -5 V to +5 V range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-16-300mil |
| Category | ADC/DAC/Data Conversion |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Relative Accuracy | -1 | 1 | LSB | A Version | 2 | ||
| Differential Nonlinearity | -0.9 | 0.9 | LSB | Guaranteed Monotonic | 2 | ||
| Unipolar Offset Error | -5 | 5 | LSB | VSS = 0 V or -12 V to -15 V; DAC Latch Contents All 0s | 2 | ||
| Bipolar Zero Error | -6 | 6 | LSB | VSS = -12 V to -15 V; DAC Latch Contents All 0s | 2 | ||
| Full-Scale Error | -6 | 6 | LSB | 2 | |||
| Full-Scale Temperature Coefficient | -5 | 5 | ppm of FSR/°C | 2 | |||
| REFOUT | REFOUT | 4.95 | 5.05 | V | 2 | ||
| Reference Temperature Coefficient | -25 | 25 | ppm/°C | A Version | 2 | ||
| Reference Load Change | ΔVREFOUT vs. IL | -1 | mV | Reference Load Current (IL) Change (0 µA-100 µA) | 2 | ||
| Reference Input Range | REFIN | 4.95 | 5.05 | V | 5 V ± 1% | 2 | |
| Reference Input Current | 5 | µA | 2 | ||||
| Input High Voltage | VINH | 2.4 | V | 2 | |||
| Input Low Voltage | VINL | 0.8 | V | 2 | |||
| Input Current | IIN | -1 | 1 | µA | VIN = 0 V to VDD | 2 | |
| Input Capacitance | 8 | pF | 2 | ||||
| Output Range Resistor | ROFSA, ROFSB | 15 | 30 | kΩ | 2 | ||
| Positive Full-Scale Change Settling Time | 3 | 10 | µs | Settling Time to Within ±1/2 LSB of Final Value | 2 | ||
| Negative Full-Scale Change Settling Time | 5 | 10 | µs | Settling Time to Within ±1/2 LSB of Final Value | 2 | ||
| VDD Range | VDD | 10.8 | 16.5 | V | For Specified Performance Unless Otherwise Stated | 2 | |
| VSS Range (Dual Supplies) | VSS | -10.8 | -16.5 | V | For Specified Performance Unless Otherwise Stated | 2 | |
| IDD | IDD | 11 | 15 | mA | Output Unloaded | 2 | |
| ISS (Dual Supplies) | ISS | 3 | 5 | mA | Output Unloaded | 2 | |
| SCLK Cycle Time | t1 | 200 | ns | 3 | |||
| SYNC to SCLK Falling Edge Setup Time | t2 | 15 | ns | 3 | |||
| SYNC to SCLK Hold Time | t3 | 50 | ns | 3 | |||
| Data Setup Time | t4 | 0 | ns | 3 | |||
| Data Hold Time | t5 | 150 | ns | 3 | |||
| SYNC High to LDAC Low | t6 | 0 | ns | 3 | |||
| LDAC Pulsewidth | t7 | 20 | ns | 3 | |||
| LDAC High to SYNC Low | t8 | 0 | ns | 3 | |||
| CLR Pulsewidth | t9 | 50 | ns | 3 | |||
| SYNC High Time | t10 | 20 | ns | 3 | |||
| VDD to AGND, DGND | VDD | -0.3 | 17 | V | Referenced to AGND, DGND | 3 | |
| VSS to AGND, DGND | VSS | -17 | 0.3 | V | Referenced to AGND, DGND; printed as +0.3 V to -17 V | 3 | |
| AGND to DGND | -0.3 | V | Upper limit printed as VDD + 0.3 V | 3 | |||
| REFOUT to AGND | REFOUT | 0 | V | Upper limit printed as VDD | 3 | ||
| REFIN to AGND | REFIN | -0.3 | V | Upper limit printed as VDD + 0.3 V | 3 | ||
| Digital Inputs to DGND | -0.3 | V | Upper limit printed as VDD + 0.3 V | 3 | |||
| Operating Temperature Range (Industrial, A and B Versions) | TA | -40 | 85 | °C | A Version | 3 | |
| Junction Temperature | TJ | 150 | °C | 3 | |||
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| Power Dissipation, SOIC | 600 | mW | 3 | ||||
| Lead Temperature (Soldering), Vapor Phase | 215 | °C | Vapor Phase (60 secs) | 3 | |||
| Lead Temperature (Soldering), Infrared | 220 | °C | Infrared (15 secs) | 3 | |||
| θJA Thermal Impedance, SOIC | θJA | 75 | °C/W | Power Dissipation, SOIC package | 3 | ||
| DC Output Impedance | 0.5 | Ω | 2 | ||||
| Digital-to-Analog Glitch Impulse | 30 | nV secs | 1 LSB Change Around Major Carry | 2 | |||
| Digital Feedthrough | 10 | nV secs | 2 | ||||
| Digital Crosstalk | 10 | nV secs | 2 |
CAD (KiCad official)
- Symbol:
AD7249ARZ - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
ad7249arz-etched.step/ad7249arz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad7249arz.step/ad7249arz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (14 pp, sha256
d8c24785b8a59f47, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AD7249ARZ
**Analog Devices** · Digital To Analog Converters (DACs) · SOIC-16-300mil
AD7249ARZ from Analog Devices, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REFOUT | output | Internal 5 V analog voltage reference output; connect REFOUT to REFIN to operate from the internal reference. |
| 2 | REFIN | input | Voltage reference input, internally buffered before being applied to both DACs; nominal reference for specified operation is 5 V. |
| 3 | ROFSB | passive | Output offset resistor for the DAC B amplifier; connect to VOUTB for the +5 V range, to AGND for the +10 V range, and to REFIN for the -5 V to +5 V range. |
| 4 | VOUTB | output | Analog buffer amplifier output of DAC B, selectable as 0 V to +5 V, 0 V to +10 V, or -5 V to +5 V. |
| 5 | AGND | power_in | Analog ground reference for all analog circuitry. |
| 6 | CLR | input | Clear logic input; taking it low clears both DACs to 0 V in the unipolar and twos complement ranges, or to -REFIN in the offset binary bipolar range. |
| 7 | BIN/COMP | input | Data format select: logic 0 selects natural binary in unipolar ranges and offset binary in the bipolar range, logic 1 selects twos complement in the bipolar range. |
| 8 | DGND | power_in | Digital ground reference for all digital circuitry. |
| 9 | SDIN | input | Serial data input; the 16-bit serial data word is applied to this pin and clocked into the input register on each falling SCLK edge. |
| 10 | LDAC | input | Load DAC logic input that updates both DAC outputs on its falling edge; if held permanently low, both DACs update on the 16th falling SCLK pulse (automatic update mode). |
| 11 | SCLK | input | Serial clock logic input; data is clocked into the input register on each falling SCLK edge. |
| 12 | SYNC | input | Data synchronization logic input; taking it low initializes the internal logic in readiness for a new data word. |
| 13 | VDD | power_in | Positive power supply, operated from +12 V to +15 V; absolute maximum is +17 V to AGND/DGND. |
| 14 | VOUTA | output | Analog buffer amplifier output of DAC A, selectable as 0 V to +5 V, 0 V to +10 V, or -5 V to +5 V. |
| 15 | VSS | power_in | Negative power supply for the output amplifiers only; connect to 0 V for single supply operation or -12 V to -15 V for dual supply operation. |
| 16 | ROFSA | passive | Output offset resistor for the DAC A amplifier; connect to VOUTA for the +5 V range, to AGND for the +10 V range, and to REFIN for the -5 V to +5 V range. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-16-300mil |
| Category | ADC/DAC/Data Conversion |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Relative Accuracy | | -1 | | 1 | LSB | A Version | 2 |
| Differential Nonlinearity | | -0.9 | | 0.9 | LSB | Guaranteed Monotonic | 2 |
| Unipolar Offset Error | | -5 | | 5 | LSB | VSS = 0 V or -12 V to -15 V; DAC Latch Contents All 0s | 2 |
| Bipolar Zero Error | | -6 | | 6 | LSB | VSS = -12 V to -15 V; DAC Latch Contents All 0s | 2 |
| Full-Scale Error | | -6 | | 6 | LSB | | 2 |
| Full-Scale Temperature Coefficient | | -5 | | 5 | ppm of FSR/°C | | 2 |
| REFOUT | REFOUT | 4.95 | | 5.05 | V | | 2 |
| Reference Temperature Coefficient | | -25 | | 25 | ppm/°C | A Version | 2 |
| Reference Load Change | ΔVREFOUT vs. IL | | | -1 | mV | Reference Load Current (IL) Change (0 µA-100 µA) | 2 |
| Reference Input Range | REFIN | 4.95 | | 5.05 | V | 5 V ± 1% | 2 |
| Reference Input Current | | | | 5 | µA | | 2 |
| Input High Voltage | VINH | 2.4 | | | V | | 2 |
| Input Low Voltage | VINL | | | 0.8 | V | | 2 |
| Input Current | IIN | -1 | | 1 | µA | VIN = 0 V to VDD | 2 |
| Input Capacitance | | | | 8 | pF | | 2 |
| Output Range Resistor | ROFSA, ROFSB | 15 | | 30 | kΩ | | 2 |
| Positive Full-Scale Change Settling Time | | | 3 | 10 | µs | Settling Time to Within ±1/2 LSB of Final Value | 2 |
| Negative Full-Scale Change Settling Time | | | 5 | 10 | µs | Settling Time to Within ±1/2 LSB of Final Value | 2 |
| VDD Range | VDD | 10.8 | | 16.5 | V | For Specified Performance Unless Otherwise Stated | 2 |
| VSS Range (Dual Supplies) | VSS | -10.8 | | -16.5 | V | For Specified Performance Unless Otherwise Stated | 2 |
| IDD | IDD | | 11 | 15 | mA | Output Unloaded | 2 |
| ISS (Dual Supplies) | ISS | | 3 | 5 | mA | Output Unloaded | 2 |
| SCLK Cycle Time | t1 | 200 | | | ns | | 3 |
| SYNC to SCLK Falling Edge Setup Time | t2 | 15 | | | ns | | 3 |
| SYNC to SCLK Hold Time | t3 | 50 | | | ns | | 3 |
| Data Setup Time | t4 | 0 | | | ns | | 3 |
| Data Hold Time | t5 | 150 | | | ns | | 3 |
| SYNC High to LDAC Low | t6 | 0 | | | ns | | 3 |
| LDAC Pulsewidth | t7 | 20 | | | ns | | 3 |
| LDAC High to SYNC Low | t8 | 0 | | | ns | | 3 |
| CLR Pulsewidth | t9 | 50 | | | ns | | 3 |
| SYNC High Time | t10 | 20 | | | ns | | 3 |
| VDD to AGND, DGND | VDD | -0.3 | | 17 | V | Referenced to AGND, DGND | 3 |
| VSS to AGND, DGND | VSS | -17 | | 0.3 | V | Referenced to AGND, DGND; printed as +0.3 V to -17 V | 3 |
| AGND to DGND | | -0.3 | | | V | Upper limit printed as VDD + 0.3 V | 3 |
| REFOUT to AGND | REFOUT | 0 | | | V | Upper limit printed as VDD | 3 |
| REFIN to AGND | REFIN | -0.3 | | | V | Upper limit printed as VDD + 0.3 V | 3 |
| Digital Inputs to DGND | | -0.3 | | | V | Upper limit printed as VDD + 0.3 V | 3 |
| Operating Temperature Range (Industrial, A and B Versions) | TA | -40 | | 85 | °C | A Version | 3 |
| Junction Temperature | TJ | | | 150 | °C | | 3 |
| Storage Temperature Range | | -65 | | 150 | °C | | 3 |
| Power Dissipation, SOIC | | | | 600 | mW | | 3 |
| Lead Temperature (Soldering), Vapor Phase | | | | 215 | °C | Vapor Phase (60 secs) | 3 |
| Lead Temperature (Soldering), Infrared | | | | 220 | °C | Infrared (15 secs) | 3 |
| θJA Thermal Impedance, SOIC | θJA | | 75 | | °C/W | Power Dissipation, SOIC package | 3 |
| DC Output Impedance | | | 0.5 | | Ω | | 2 |
| Digital-to-Analog Glitch Impulse | | | 30 | | nV secs | 1 LSB Change Around Major Carry | 2 |
| Digital Feedthrough | | | 10 | | nV secs | | 2 |
| Digital Crosstalk | | | 10 | | nV secs | | 2 |
## CAD (KiCad official)
- Symbol: `AD7249ARZ`
- Footprint: `Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm`
- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files: `ad7249arz-etched.step` / `ad7249arz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ad7249arz.step` / `ad7249arz.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/AD7249.pdf) (14 pp, sha256 `d8c24785b8a59f47`, retrieved 2026-11-12, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ad7249arz-datasheet.pdf)