component
AD586BRZ-REEL7
Public Made by Adomby adom
Analog Devices Voltage Reference, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAD586BRZ-REEL7
Analog Devices · Voltage Reference · SOIC-8
AD586BRZ-REEL7 from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TP1 | unconnected | Factory trim pad (internal test point); no connections should be made to this pin except a dummy PCB pad. |
| 2 | VIN | power_in | Input voltage supply, with line regulation specified for 10.8 V to 36 V and an absolute maximum VIN to ground of 36 V. |
| 3 | TP1 | unconnected | Factory trim pad (internal test point); no connections should be made to this pin except a dummy PCB pad. |
| 4 | GND | power_in | Ground reference pin; the device is operated with this pin grounded. |
| 5 | TRIM | passive | Optional external fine trim that can offset the output by as much as 300 mV using the trim circuit in Figure 6. |
| 6 | VOUT | power_out | 5 V output voltage, which is safe for indefinite short to ground or VIN and can source or sink 10 mA. |
| 7 | TP1 | unconnected | Factory trim pad (internal test point); no connections should be made to this pin except a dummy PCB pad. |
| 8 | NOISE REDUCTION | passive | Optional noise reduction pin; an external 1 µF capacitor to ground forms a low-pass filter that reduces the Zener noise. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| OUTPUT VOLTAGE | 4.9975 | 5.0025 | V | TA = 25°C, VIN = 15 V | 3 | ||
| OUTPUT VOLTAGE DRIFT | 5 | ppm/°C | 0°C to 70°C | 3 | |||
| GAIN ADJUSTMENT | -2 | 6 | % | 3 | |||
| LINE REGULATION | -100 | 100 | µV/V | 10.8 V < +VIN < 36 V, TMIN to TMAX | 3 | ||
| LOAD REGULATION sourcing | 100 | µV/mA | Sourcing 0 mA < IOUT < 10 mA, 25°C | 3 | |||
| LOAD REGULATION sourcing TMIN to TMAX | 100 | µV/mA | Sourcing 0 mA < IOUT < 10 mA, TMIN to TMAX | 3 | |||
| LOAD REGULATION sinking | 400 | µV/mA | Sinking −10 mA < IOUT < 0 mA, 25°C | 3 | |||
| QUIESCENT CURRENT | IQ | 2 | 3 | mA | 3 | ||
| POWER CONSUMPTION | 30 | mW | 3 | ||||
| OUTPUT NOISE 0.1 Hz to 10 Hz | 4 | µV p-p | 0.1 Hz to 10 Hz | 3 | |||
| OUTPUT NOISE spectral density | 100 | nV/√Hz | Spectral Density, 100 Hz | 3 | |||
| LONG-TERM STABILITY | 15 | ppm/1000 hr | 3 | ||||
| SHORT-CIRCUIT CURRENT-TO-GROUND | 45 | 60 | mA | 3 | |||
| TEMPERATURE RANGE Specified Performance (B grade) | -40 | 85 | °C | Lower row: specified performance for A and B grades | 3 | ||
| TEMPERATURE RANGE Operating Performance | -40 | 85 | °C | Operating temperature range defined as extremes at which device still functions | 3 | ||
| VIN to Ground | 36 | V | 5 | ||||
| Power Dissipation | 500 | mW | 25°C | 5 | |||
| Storage Temperature | -65 | 150 | °C | 5 | |||
| Lead Temperature (Soldering, 10 sec) | 300 | °C | Soldering, 10 sec | 5 | |||
| Package Thermal Resistance θJC | θJC | 22 | °C/W | 5 | |||
| Package Thermal Resistance θJA | θJA | 110 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
AD586BRZ-REEL7 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ad586brz-reel7-etched.step/ad586brz-reel7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad586brz-reel7.step/ad586brz-reel7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
e0fe4ad99ffe1bcf, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).